Measurement of Protein Import Capacity of Skeletal Muscle Mitochondria

Podsumowanie

Mitochondria are key metabolic organelles that exhibit a high level of phenotypic plasticity in skeletal muscle. The import of proteins from the cytosol is a critical pathway for organelle biogenesis, essential for the expansion of the reticulum and the maintenance of mitochondrial function. Therefore, protein import serves as a barometer of cellular health.

Streszczenie

Mitochondria are key metabolic and regulatory organelles that determine the energy supply as well as the overall health of the cell. In skeletal muscle, mitochondria exist in a series of complex morphologies, ranging from small oval organelles to a broad, reticulum-like network. Understanding how the mitochondrial reticulum expands and develops in response to diverse stimuli such as alterations in energy demand has long been a topic of research. A key aspect of this growth, or biogenesis, is the import of precursor proteins, originally encoded by the nuclear genome, synthesized in the cytosol, and translocated into various mitochondrial sub-compartments. Mitochondria have developed a sophisticated mechanism for this import process, involving many selective inner and outer membrane channels, known as the protein import machinery (PIM). Import into the mitochondrion is dependent on viable membrane potential and the availability of organelle-derived ATP through oxidative phosphorylation. Therefore its measurement can serve as a measure of organelle health. The PIM also exhibits a high level of adaptive plasticity in skeletal muscle that is tightly coupled to the energy status of the cell. For example, exercise training has been shown to increase import capacity, while muscle disuse reduces it, coincident with changes in markers of mitochondrial content. Although protein import is a critical step in the biogenesis and expansion of mitochondria, the process is not widely studied in skeletal muscle. Thus, this paper outlines how to use isolated and fully functional mitochondria from skeletal muscle to measure protein import capacity in order to promote a greater understanding of the methods involved and an appreciation of the importance of the pathway for organelle turnover in exercise, health, and disease.

Wprowadzenie

Mitochondria are organelles that exist in complex morphologies in different cell types and are recognized to possess an increasing array of functions that are critical for cellular health. As such, they can no longer be whittled down merely to energy-producing organelles. Mitochondria are key metabolic regulators, determinants of cell fate, and signaling hubs, the functions of which can serve as useful indicators of overall cellular health. In skeletal muscle cells, electron microscopy studies reveal the presence of geographically distinct subsarcolemmal (SS) and intermyofibrillar (IMF) mitochondria, which exhibit a degree of connectivity^1,2,3,4 that is now recognized to be highly dynamic and adaptable to changes in skeletal muscle activity levels, as well as with age and disease. Mitochondrial content and function in muscle can be assessed in numerous ways^5,6, and traditional methods of organelle isolation have been applied to better understand the respiratory and enzymatic capacities (Vmax) of mitochondria distinct from the influence of the cellular milieu^7,8. In particular, these traditional methods have revealed subtle biochemical distinctions between mitochondria isolated from subsarcolemmal and intermyofibrillar regions, belying possible functional implications for metabolism in these subcellular regions^8,9,10,11.

The biogenesis of mitochondria is unique in requiring the contribution of gene products from both nuclear and mitochondrial DNA. However, the vast majority of these are derived from the nucleus since mtDNA transcription only leads to the synthesis of 13 proteins. Since mitochondria normally comprise >1000 proteins involved in diverse metabolic pathways, biogenesis of the organelle requires a tightly regulated means of import and assembly of precursor proteins from the cytosol into the various mitochondrial sub-compartments to maintain proper stoichiometry and function^12,13. Nuclear-encoded proteins destined for mitochondria normally carry a mitochondrial targeting sequence (MTS) that targets them to the organelle and facilitates their sub-compartmental localization. Most matrix-bound proteins contain a cleavable N-terminal MTS, while those destined for the outer or inner mitochondrial membrane usually have internal targeting domains¹⁴. The import process is carried out by a set of diverse channels that provide multiple avenues for entry into the organelle¹³. The translocase of the outer membrane (TOM) complex shuttles precursors from the cytosol into the intermembrane space, where they are recognized by the translocase of the inner membrane (TIM) complex. This complex is responsible for importing nuclear-encoded precursors into the matrix, where proteases cleave the N-terminal targeting presequence. Proteins destined for the outer membrane can be directly inserted into this membrane through the TOM complex, while those destined for the inner membrane are inserted by a TIM protein, specifically TIM22. Following their import, proteins are further processed by resident proteases and chaperones and often combine to form larger complexes, such as those found in the electron transport chain.

Mitochondrial protein import itself also serves as a measurement of mitochondrial health, as this process relies on the presence of membrane potential and a source of energy in the form of ATP¹⁵. For example, when the membrane potential is dissipated, protein kinase PINK1 cannot be taken up by the organelle, and this leads to phosphorylation signals that trigger the onset of the degradation of the organelle through a pathway called mitophagy^16,17. Under similar circumstances, when the import is impeded, the protein ATF5 cannot enter the organelle, and it subsequently translocates to the nucleus, where it serves as a transcription factor for the up-regulation of UPR gene expression^18,19. Thus, measuring protein import efficiency can provide comprehensive insight into the health of the organelle, while the gene expression response can be used to indicate the degree of retrograde signaling to the nucleus.

Despite its obvious importance for the biogenesis of mitochondria and for cellular health in general, the import pathway in mammalian mitochondria is remarkably understudied. In this report, we describe the specific steps involved in measuring the import of precursor proteins into skeletal muscle mitochondria and provide data to illustrate the adaptive response of the import system to changes in muscle and disuse, illustrating the contribution of the protein import to the adaptive plasticity of skeletal muscle.

Protokół

All animals used in these experiments are maintained in the animal care facility at York University. The experiments are conducted in accordance with the Canadian Council on Animal Care guidelines with approval from the York University Animal Care Committee (Permit: 2017-08).

1. Functional isolation of subsarcolemmal and intermyofibrillar mitochondria from skeletal muscle

1. Reagent preparation:
   1. Prepare all the buffers and media as mentioned in Table 1.
   2. Set the buffers to pH 7.4 and store at 4 °C (up to 2 weeks), except nagrase protease.
   3. Prepare fresh nagarse protease (Table 1) each time.
2. Tissue removal and mincing
   NOTE: A flowchart of the steps below for the isolation of mitochondria is provided in Figure 1.
   1. Fill a glass scintillation vial with ~20 mL of Buffer 1 (Table 1) and place it on ice.
   2. While the mouse is under anesthetic, harvest skeletal muscles (tibialis anterior, quadriceps, gastrocnemius etc.), approximately 500-1000 mg, and place the muscles in the scintillation vial containing chilled Buffer 1.
      NOTE: Gaseous isoflurane is used as an anesthetic at 2.5% at a flow rate of 0.4 L of O₂/min. A pinch test is performed to ensure that the animal is non-responsive.
   3. Following tissue collection, euthanize the animal via cervical dislocation.
   4. Pre-chill a watch glass on ice. Remove any fat or connective tissue from the muscles and mince the tissue on the watch glass until it is a homogenous slurry.
   5. Place the minced tissue in a pre-chilled 50 mL plastic centrifugation tube (see Table of Materials) and record the exact weight.
   6. Dilute the minced tissue 10-fold with Buffer 1 + ATP (Table 1).
   7. Homogenize the muscle sample using an 8 mm twin-blade homogenizer (see Table of Materials) at a power output of 9.8 Hz for 10 s, ensuring no visible chunks of muscle are remaining.
   8. Centrifuge the samples at 800 x g for 10 min using a high-speed centrifuge (see Table of Materials).
      NOTE: The purpose of this step is to separate SS and IMF mitochondrial fractions. The supernate contains SS mitochondria, while the pellet contains IMF mitochondria.
3. SS mitochondrial isolation
   1. Filter the supernate through a single layer of cheesecloth into another set of 50 mL plastic centrifugation tubes to remove any large debris or contaminants.
   2. Centrifuge the supernate at 9,000 x g for 10 min at 4 °C using a high-speed centrifuge.
   3. Discard the supernate and resuspend the pellet in 3.5 mL of Buffer 1 + ATP.
      NOTE: Resuspend with a P1000 and do this carefully. Mitochondria are fragile organelles. Perform gently and avoid touching the pellet with the pipette tip.
   4. Centrifuge the sample at 9,000 x g for 10 min at 4 °C using a high-speed centrifuge.
   5. Discard the supernate unless further processing to isolate a cytosolic fraction devoid of nuclei, mitochondria, and other organelles is desired. Resuspend the pellet carefully in roughly 95 µL of the resuspension medium (Table 1) using a P200 pipette.
      NOTE: Similar to step 1.3.3, avoid touching the pellet with the pipette tip. The volume of the resuspension medium can be altered depending on the size of the pellet. This is the SS mitochondrial fraction, which can be stored on ice until the IMF fraction is isolated. If desired, the cytosolic fraction, devoid of organelles, can be isolated by centrifuging the supernate at 100,000 x g in an ultracentrifuge (see Table of Materials) and thereafter discarding the pellet.
4. IMF mitochondrial isolation
   1. Dilute the pellet from step 1.2.8 by 10-fold in Buffer 1 + ATP. Resuspend using a Teflon pestle by gently mixing the pellet and buffer together until the sample is consistent.
   2. Homogenize the sample using an 8 mm twin-blade homogenizer (see Table of Materials) at a power output of 9.8 Hz for 10 s.
   3. Centrifuge the sample at 800 x g for 10 min at 4 °C using a high-speed centrifuge.
   4. Discard the supernate and dilute the IMF mitochondrial pellet 10-fold using Buffer 2 and resuspend using the Teflon pestle by gently mixing until it is homogeneous.
   5. Add 25 µL/g of tissue to 10 mg/mL nagarse protease (Table 1) and place the centrifugation tube on its side on ice, gently mixing every minute by rocking the tube side to side.
      NOTE: The addition of nagarse helps liberate IMF mitochondria by performing limited digestion of the myofibrils.
   6. After 5 min, add 20 mL of Buffer 2 (Table 1) to dilute the nagarse protease to the point of inactivity and stop the digestion.
   7. Immediately centrifuge the sample at 5,000 x g for 5 min at 4 °C using a high-speed centrifuge.
   8. Discard the supernate and dilute the pellet 10-fold using Buffer 2 and resuspend using a Teflon pestle by gently mixing.
   9. Centrifuge the sample at 800 x g for 15 min at 4 °C to pellet the fibrous material.
   10. Pour the supernate in a new set of 50 mL plastic centrifuge tubes, careful not to disrupt the pellet, which can be discarded.
   11. Centrifuge the sample at 9,000 x g for 10 min at 4 °C as in step 1.4.7.
   12. Discard the supernate, add 3.5 mL of Buffer 2 and gently resuspend the pellet using a P1000 pipette.
   13. Centrifuge the sample at 9,000 x g for 10 min at 4 °C as in step 1.4.7.
   14. Discard the supernate and resuspend the pellet gently with roughly 180 µL of resuspension medium using a P200 pipette.
       ​NOTE: The volume of the resuspension medium can be altered depending on the size of the pellet. This is the IMF mitochondrial fraction, which can be stored on ice until it is to be used in the import assay.

2. Mitochondrial protein import

1. In vitro transcription
   NOTE: These subsequent steps outline how to prepare a radiolabelled protein for import. The import pathway under investigation may dictate the choice of target protein, for example, to evaluate import into the mitochondrial matrix, ornithine carbamyl transferase, OCT, and malate dehydrogenase, MDH, are commonly used, while Tom40 is commonly used as an indication of import into the outer mitochondrial membrane. For the following steps, plasmid DNA encoding the protein of choice is required. The transcription of plasmid DNA can be done prior to the mitochondrial isolation on a separate day, and the mRNA collected from this experiment can be stored and used in future translation and import experiments.
   1. Linearize the DNA: Combine 40 µL of plasmid DNA (5 µg/µL), 5 µL of 10x enzyme buffer and 5 µL of restriction enzyme and incubate at 37 °C for 30 min.
      NOTE: The restriction enzymes utilized may vary based on the plasmid, which may require a different enzyme buffer, and experimental conditions DNA can be used in any amount/volume, as the template can be scaled up or down.
   2. Purify and precipitate the linearized DNA using phenol and ethanol. Carry out all the subsequent steps (2.1.3-2.1.15) in sterile 1.5 mL tubes, and use a tabletop centrifuge (see Table of Materials) for the centrifugation steps.
   3. Add the appropriate volume of sterile H₂O so that the final volume equals 400 µL. Then, add 400 µL of phenol.
   4. Mix vigorously by inversion for ~10 s, and centrifuge at 17,000 x g for 1 min at 4 °C. Withdraw and save the upper phase.
   5. Add 400 µL of phenol:chloroform:isoamylalcohol (25:24:1, v:v:v).
   6. Mix vigorously by inversion for ~10 s, and centrifuge at 17,000 g for 1 min at 4 °C. Withdraw and save the upper phase.
   7. Add 400 µL of chloroform:isoamylalcohol (24:1, v:v).
   8. Mix vigorously by inversion for ~10 s, and centrifuge at 17,000 g for 1 min at 4 °C. Withdraw and save the upper phase.
   9. Add 40 µL of 3M sodium acetate (pH 7.0), and add 1 mL of 95% ethanol.
   10. Place sterile 1.5 mL tubes in -80 °C freezer on their side for 15 min.
   11. Centrifuge the samples at 17,000 x g for 10 min at 4 °C.
   12. Discard the supernate and wash the pellet with 300 µL of 80% ethanol.
   13. Centrifuge the samples at 17,000 x g for 2 min at 4 °C.
   14. Discard the supernate and air-dry the pellet. Once the pellet is dry, it should be clear.
   15. Resuspend the pellet in 20 µL of sterile H₂O
   16. Measure the DNA concentration using a spectrophotometer (see Table of Materials) and ensure that the A_260:280 ratio is above 1.8.
   17. Dilute the DNA to a concentration of 0.8 µg/µL in sterile H₂O.
   18. Transcribe the DNA: Combine plasmid (0.8 µg/µL, 60.8 µL), sterile H₂O (8.4 µL), 10 mM NTP (5.2 µL), 10 mM ATP ( 10.0 µL), 1 mM M-7-G (11.6 µL), the mix as mentioned step 2.1.19 (15.6 µL), RNAsin (5.2 µL) and an appropriate RNA polymerase (4.8 µL) to form "one reaction mix" (total volume = 121.6 µL) and incubate for 90 min at the optimum temperature for the polymerase (37 °C for T7 polymerase; 40 °C for SP6 polymerase)
   19. To prepare the mix add 200 µL of 1M HEPES (pH 7.9), 100 µL of 1 M MgAc₂, 500 µL of 4 M KAc, 100 µL of 20 mM spermidine, 100 µL of 0.5 M DTT, and 200 µL of sterile H₂0.
       NOTE: The reaction can be scaled up or down in volume as long as the provided proportions of reagents are maintained. The RNA polymerase used is dictated by the bacterial promoter sequence within the plasmid being used.
   20. Then, purify and precipitate the mRNA using phenol and ethanol as in steps 2.1.2-2.1.15. Bring the volume up to 400 µL with sterile H₂O (add 280 µL) and proceed as described in steps 2.1.2-2.1.15. Resuspend the final pellet in 20 µL of sterile H₂O.
   21. Measure the concentration of mRNA using a spectrophotometer, ensure that the A_260:280 ratio is ~2.0.
   22. Dilute the mRNA to 2.8 µg/µL in sterile H₂O, and store at -20 °C in 50 µL aliquots.
2. In vitro translation
   NOTE: The translation of the desired DNA must be carried out on the same day of the import experiment. This experiment requires the use of radiolabeled amino acids, and therefore the user must have a permit for the use of radioisotopes, and all handling and disposal must be in accordance with the institution's policies/requirements. Steps involving radioisotope safety measures have been omitted or described briefly, as these will likely differ based on the institution.
   1. Prepare enough translation reaction mix (Table 2) to supply ~20 µL per sample of mitochondria to be used in the import experiment and include the same volume for a translation lane.
   2. Incubate the reaction for 30 min at 30 °C (time may vary with mRNA, 25-60 min).
   3. Record the ³⁵S-methionine use as per the institution's radioactive safety requirements and dispose of anything that has come into contact with the radioisotope per the institution's guidelines.
3. Protein import
   NOTE: Freshly isolated mitochondria are required for the next steps. Refer to the mitochondrial isolation protocol. Other isolation methods can be used as long as the mitochondria are viable and functional. For the subsequent steps, the mitochondrial samples utilized are resuspended in a resuspension buffer as described above (Table 1). The protein concentration of the mitochondrial sample must also be measured prior to starting the import assay.
   1. Roughly 15 min following the start of the translation reaction, aliquot 90 µg of mitochondria into sterile 1.5 mL tubes and pre-incubate at 30 °C for ~10 min.
      NOTE: Aliquot more mitochondria than what will actually be used in the experiment; only 75 µg will be actually used. However, aliquoting in excess is not a requirement.
   2. In a fresh set of sterile 1.5 mL tubes, combine 75 µg of mitochondria with 18 µL of the translation reaction and incubate at 30 °C for desired time.
   3. Keep the remaining volume of the translation reaction on ice; this will be utilized later.
      NOTE: Import is a time-dependent process, so it may be prudent to start with a time-course experiment ranging in incubation times from 1-60 min. A typical reaction time is 30 min.
   4. During this time, prepare the sucrose cushion by combining 1 g of sucrose, 200 µL of 2.5 M KCl, 10 µL 1 M MgCl₂, 100 µL of 1 M HEPES (pH 7.4), and bring the volume to 5 mL using sterile H₂O.
   5. Prepare a new set of sterile 1.5 mL tubes corresponding to each tube in the import reaction. Aliquot 600 µL of the sucrose cushion into each tube and keep on ice until the import reaction is over.
   6. To terminate the import reaction after the appropriate incubation time, remove the tube from 30 °C, place it on ice and then carefully transfer the import reaction on top of the tube with the sucrose cushion.
      NOTE: This step needs to be done very slowly to ensure that the mitochondria are not damaged/ruptured. The sucrose cushion helps slow down the migration of the mitochondria and "cushions" its descent to the bottom of the tube during the subsequent centrifugation step.
   7. Centrifuge the samples + sucrose cushion at 17,000 x g for 15 min at 4 °C.
   8. Prepare the breaking buffer by combining 25 mL of 2.4 M sorbitol, 2 mL of 1 M HEPES (pH 7.4), and 72 mL of double-distilled H₂O.
   9. Prepare lysis buffer for SDS-PAGE gel electrophoresis: Combine 50 mL of heated glycerol, 11.5 g of SDS, 31.25 mL of 1 M Tris (pH 6.8) and bring the volume to 500 mL with double-distilled H₂O.
   10. For sample preparation, mix 475 µL of lysis buffer with 25 µL of β-mercaptoethanol to be used in a later step.
       NOTE: Lysis buffer can be made in advance and stored at room temperature; however, the addition of β-mercaptoethanol is to be done fresh.
   11. Using a P1000 pipette, carefully remove the supernate and do not disturb the pellet. Dispose of the supernate in an appropriate radioactive waste container.
   12. For import into the outer membrane, perform this using Tom40, resuspend the pellet in 50 µL of freshly prepared 0.1 M sodium carbonate (pH 11.5) and incubate on ice for 30 min.
   13. Following the incubation, centrifuge the sample 14,000 x g for 5 min at 4 °C. This step is only done for outer membrane import reactions.
   14. To prepare the samples for SDS-PAGE electrophoresis, add 20 µL of breaking buffer, 20 µL of lysis buffer, and β-mercaptoethanol and resuspend well. Add 5 µL of sample dye.
   15. Prepare the control/translation lane by combining 3 µL of the remaining translation reaction from step 2.3.3 with 37 µL of lysis buffer and 5 µL of sample dye. Mix well.
   16. Boil the samples for 5 min at 95 °C and spin down gently at a low speed to avoid pelleting mitochondria.
   17. Apply the samples to a SDS polyacrylamide gel.
       NOTE: The gel percentage and subsequent run time will depend on which protein is being imported. For example, OCT is 37 kDa, and its mature processed band is slightly smaller; therefore, a 12% gel allows good separation of these bands.
   18. Once electrophoresis is complete, remove the gel and place it in double-distilled H₂O.
   19. Boil the gel in 5% TCA in a fume hood for 5 min, continuously stirring/moving the gel to avoid cracking.
       NOTE: TCA helps solidify the gel for visualization; this can be done in a metal tray over a Bunsen burner. Use enough TCA to generously cover the gel, ~½ full.
   20. Remove the gel and place it back in double-distilled H₂O. Agitate it on a rotating plate for 1 min at ~50 rpm.
   21. Wash the gel in 10 mM Tris on a rotating plate for 5 min at ~50 rpm, again using enough to generously cover the gel, ~½ of the container.
   22. Precipitate the protein by washing the gel in 1 M Salicyclic acid on a rotating plate for 30 min, again using enough Salicyclic acid to generously cover the gel, ~½ of the container being used.
   23. Dehydrate the gel as described in steps 2.3.24-2.3.31.
       NOTE: This can be done in a number of ways. A gel dryer (see Table of Materials) provides a time-efficient option (described below); however other commercially available methods/kits can be used that may be more cost-effective but more time-consuming. Gel drying kits can be utilized as an alternative that does not require the application of heat or suction but instead allows the gel to air-dry between cellophane sheets to prevent distortion.
   24. Place a large sheet of blotting paper down on the porous bed of the gel dryer. Place one sheet of paper towel in the area where the gel will be applied.
   25. Cut a 15 cm x 20 cm piece of blotting paper and place it on the paper towel.
   26. Scoop out the gel from the container using a second piece of 15 cm x 20 cm blotting paper and lay it down flat on top of the first piece.
   27. Cut a slightly larger piece of plastic wrap, ~20 cm x 25 cm, and place it down on gel, ensuring no creases or bubbles under the wrap.
       NOTE: This may take a few attempts, but it is imperative that there are no trapped air pockets.
   28. Gently lay down the plastic cover of the gel dryer over top of the wrap, again ensuring that there are no bubbles or creases.
   29. Turn on the pump/vacuum and ensure that the plastic cover has formed a seal. Test the seal by lifting a corner of the plastic cover and wait for it to re-seal.
   30. Close the gel dryer and run for 90 min. Set the temperature to start at 30 °C, gradually reach 80 °C, and then return to 30 °C at the end of the run.
   31. Once dehydrated, the gel will solidify and feel paper-thin. Wrap the gel in the plastic wrap used in the drying process.
   32. Place the dehydrated gel in a film cassette with a phosphorus film (see Table of Materials), with the white side facing the gel. Exposure times vary but can be 24-48 h for visualization of bands.
   33. Visualize using autoradiography using any suitable imager that is capable of phosphorus imaging.

Wyniki

We have extensively illustrated that this protocol is a valid assay for determining the rate of import into functional and intact isolated skeletal muscle mitochondria. In comparison to untreated conditions, the import of typical precursor proteins such as malate dehydrogenase (MDH) into the matrix is sensitive to membrane potential because it can be inhibited by valinomycin, a respiratory chain uncoupler (Figure 2A). Import is also impeded when mitochondrial inner and outer...

Dyskusje

Mitochondria are uniquely dependent on the expression and coordination of both the nuclear and mitochondrial genomes for their synthesis and expansion within cells. However, the nuclear genome encodes the vast majority (99%) of the mitochondrial proteome, and this underscores the importance of the protein import machinery in supporting mitochondrial biogenesis. Import also serves as an important signaling event, as failure to import can promote the initiation of the unfolded protein response and/or mitophagy

Materiały

Name	Company	Catalog Number	Comments
0.2% BSA	Sigma	A2153
35S-methionine	Perkin Elmer	NEG709A500UC	Purchase requires a valid radioisotope permit
ATP	Sigma	A7699
Blotting paper; Whatman 3MM CHR Paper	Thermo Fisher	05-714-5
Cassette for film	Kodak	Kodak Xomatic
Centrifugation Tube	Thermo Fisher	3138-0050
Chloroform	Thermo Fisher	C298-4
DTT	Sigma	D9779-5G
EDTA	BioShop	EDT002
EGTA	Sigma	E4378
Gel Dryer	BioRad	Model 583
Gel Drying Kit	Sigma or BioRad	Z377570-1PAK or OW-GDF-10	Various options are commercially available through many companies, these are just as few examples.
Glycerol	Caledon Laboratory Chemicals	5350-1-40
HEPES	Sigma	H3375
High Speed Centrifuge	Beckman Coulter	Avanti J-25 Centrifuge
Homogenizer	IKA	T25 Digital Ultra Turrex
Isoamylalcohol, or 3-methylbutanol	Sigma	I9392
KAc	BioShop	POA301.500
KCl	Sigma	P3911
M7G	New England Biolab	S1404S	Dilute with 1000ul 20mM HEPES to make 1mM stock
MgCl	BioShop	MAG510
MgSO4	Thermo Fisher	M65-500
MOPS	BioShop	MOP001
NaCl	BioShop	SOD001
NTP	Thermo Fisher	R0191
OCT Plasmid	-	-	Donated from Dr. G. C. Shore, McGill University, Montreal, Canada; alternative available through Addgene, plasmid #71877
pGEM4Z/hTom40 Plasmid	-	-	Donated from Dr. M. T. Ryan, La Trobe University, Melbourne, Australia
pGMDH Plasmid	-	-	Donated from Dr. A. Strauss, Washington University School of Medicine
Phenol	Sigma	P4557
Phenol:Chloroform:Isoamyalcohol	Sigma	P3803	Can also be made with the ratio provided
Phosphorus Film	Fujifilm	BAS-IP MS 2025
Rabbit reticulocyte lysate	Promega	L4960	Avoid freeze-thaw; aliquot lysate upon arrival; amino acids are provided in the kit as well
RNAsin	Promega	N2311
Rotor for High Speed Centrifuge	Beckman Coulter	JA-25.50
SDS	BioShop	SDS001.500	Caution: harmful if ingested or inhaled, wear a mask.
Sodium acetate	Bioshop	SAA 304
Sodium Carbonate	VWR	BDH9284
Sodium salicylate	Millipore Sigma	106601
Sorbitol	Sigma	S6021
SP6 RNA Polymerase	Promega	P1085
Spectrophotometer	Thermo Fisher	Nanodrop 2000
Spermidine	Sigma	S-2626
Sucrose	BioShop	SUC507
T7 RNA Polymerase	Promega	P2075
Tabletop Centrifuge	Thermo Fisher	AccuSpin Micro 17
Trichloroacetic acid	Thermo Fisher	A322-500
Tris	BioShop	TRS001
β-mercaptoethanol	Sigma	M6250-100ML