Using Micro-computed Tomography for the Assessment of Tumor Development and Follow-up of Response to Treatment in a Mouse Model of Lung Cancer

Summary

We describe a method for the detection of tumor nodule development in the lungs of an adenocarcinoma mouse model using micro-computed tomography and its use for monitoring changes in nodule size over time and in response to treatment. The accuracy of the assessment was confirmed with end-point histological quantification.

Abstract

Lung cancer is the most lethal cancer in the world. Intensive research is ongoing worldwide to identify new therapies for lung cancer. Several mouse models of lung cancer are being used to study the mechanism of cancer development and to experiment with various therapeutic strategies. However, the absence of a real-time technique to identify the development of tumor nodules in mice lungs and to monitor the changes in their size in response to various experimental and therapeutic interventions hampers the ability to obtain an accurate description of the course of the disease and its timely response to treatments. In this study, a method using a micro-computed tomography (CT) scanner for the detection of the development of lung tumors in a mouse model of lung adenocarcinoma is described. Next, we show that monthly follow-up with micro-CT can identify dynamic changes in the lung tumor, such as the appearance of additional nodules, increase in the size of previously detected nodules, and decrease in the size or complete resolution of nodules in response to treatment. Finally, the accuracy of this real-time assessment method was confirmed with end-point histological quantification. This technique paves the way for planning and conducting more complex experiments on lung cancer animal models, and it enables us to better understand the mechanisms of carcinogenesis and the effects of different treatment modalities while saving time and resources.

Introduction

Lung cancer is the leading cause of cancer death around the world¹. Research into the prevention, early detection, and treatment of lung cancer is ongoing in many research centers throughout the world^2,3. Several animal models for lung cancer have been developed, and they have proven useful in studying the mechanisms of lung carcinogenesis and cell of origin, in determining the presence of cancer stem cells, and in examining various novel therapeutic strategies⁴. Earlier models relied on carcinogen-induced tumor initiation in sensitive strains of mice⁵. The development of knockout and transgenic mouse models in which lung cancer arises as a result of specifically manipulated genetic lesions has substantially improved our ability to control tumor induction and mimic several aspects of human lung cancer⁴. However, a major challenge in the use of lung cancer animal models is the absence of a real-time method to accurately identify and monitor the onset and development of tumors in mouse lungs and to document any later change in their sizes, such as their continued growth or reduction in response to treatments. This has forced researchers to resort to several time, effort, and resource-consuming techniques to identify the tumors and to evaluate their experimental results. The presence of inherent inter-mouse variation in response to tumor induction requires the use of large numbers of animals in each experimental group to reduce data variability. The inability to assess the tumor growth or response to treatment in real-time has forced researchers to blindly euthanize mice at multiple time-points in prolonged experimental protocols to guarantee that they will collect the right data, resulting in the waste of resources from the samples collected at time points that are either too early or too late.

In the present study, a method to exploit a small-animal micro-computed tomography (micro-CT) scanner to detect and follow-up lung tumors in living mice is introduced. We used our recently described Sftpc-rtTA and Tre-Fgf9-ires-eGfp double-transgenic (DT) mice that rapidly develop lung adenocarcinoma following induction with doxycycline^6,7. The use of micro-CT enables us to (among other things) exclude mice with aberrant lung abnormalities before induction, confirm development of tumor nodules in the lung after induction, and observe changes in tumor nodules in response to experimental treatments. End-point euthanasia of mice and histological assessment confirmed the accuracy of the real-time assessment conducted with micro-CT. We believe that this technique will pave the way for conducting better-planned experiments using lung cancer animal models while saving valuable resources, shortening observation time and increasing the accuracy and understanding of results.

Protocol

Animal experiments were approved by the Institutional Animal Care and Use Committee of Keio University.

Note: In this study, we used the Sftpc-rtTA and Tre-Fgf9-ires-eGfp DT mice in which lung adenocarcinoma rapidly develops after induction by feeding chow containing doxycycline^6,7. However, all assessment procedures can be applied to other lung cancer mouse models.

1. Experiment Outline:

1. Identify the status of the lungs at the baseline:
   1. Before tumor induction, when the DT mice are 8 - 12 weeks old, perform the first micro-CT scan (see sections 2 and 3 below). This serves as the lung baseline scan, confirms the absence of spontaneously developed nodules caused by a leaky transgene, and document the absence of any existing lung pathology before tumor induction.
2. Initiate tumor induction:
   1. Switch the DT mice from regular chow to doxycycline chow to induce Fibroblast Growth Factor (FGF)9 expression in the alveolar cells and to initiate tumor development. Give doxycycline chow (200 ppm) ad libitum.
3. Confirm the development of tumor nodules in mouse lungs:
   1. Perform a micro-CT scan to identify the development of tumor nodules compared to the pre-induction scan.
4. Assess response to treatment:
   1. To test the ability of the micro-CT to detect changes in tumor nodules in response to treatment, administer the FGF Receptor (FGFR) inhibitor AZD4547, then perform additional micro-CT scans after 5 and 10 weeks.
5. End-point evaluation:
   1. Euthanize all treatment and control mice and process tissues for histological evaluation (see section 6 below).

2. Preparing Mice for Micro-CT Image Acquisition:

1. Turn on the micro-CT scanner and computer.
2. Click on the software named "R_m CT2", then click on "warm up".
3. Remove the sample bed upon which the mouse will be placed from the micro-CT chamber. Wrap the bed with plastic wrap.
4. Set the anesthesia induction box by adding isoflurane to the anesthesia vaporizer up to the marked level. Set the isoflurane flow rate at 3 L/min.
5. Open the oxygen tank to start the oxygen flow into the induction box and set the flow rate at 1 L/min.
6. Place the mouse in the anesthesia induction box and confirm that it is deeply anesthetized by the absence of spontaneous movement and in response to a skin pinch (a gentle pinch of a small fold of skin, which does not cause tissue damage or skin break).
7. Apply an ocular lubricant to prevent corneal dryness during anesthesia.
8. Open the micro-CT chamber and place the mouse with the dorsal side up on the sample bed. Hold the head of the mouse and pull the body downward from the lower limbs in order to stretch and straighten the body symmetrically.
9. Turn off the anesthesia flow to the induction box and turn it on towards the tube that connects to the micro-CT chamber.
10. Place the anesthesia tube into the mouse's nose to administer continuous anesthetic.
11. In order to fix the mouse in position; wrap the mouse and the sample bed with plastic wrap.
    Note: It is critical to keep the mouse under deep anesthesia and wrapped to the sample bed because any slight movement or twist of its body during the scan will result in hazy images and difficulty in interpretation.
12. Close the micro-CT chamber.
13. Adjust the micro-CT system to 90 kV and 160 µA and the scan time to 4.5 min. Set the image range to 24 × 19 mm and the voxel size to 50 × 50 × 50 µm. Use the synchronous mode for heartbeats.
14. Make a new folder in the "Database" in order to save new images in that folder.
15. Start the scan.
16. After completion of the scan, move the mouse into an empty cage and observe it until it regains consciousness. Do not put it with other mice until it has fully recovered from the effects of the anesthesia.

3. Pre-induction Micro-CT Image Visualization and Analysis:

1. To visualize the micro-CT images, download the free ImageJ software from the following web site: http://imagej.nih.gov/ij/ . Note: Every micro-CT data file is a stack of approximately 500 TIF Files (.tif). Other image viewing software can also be used.
2. Open the serial micro-CT images files and scroll through all of the images of each mouse from the neck to the abdomen or vice versa.
3. Using scans of naïve wild-type mice, identify the density of different areas and normal anatomical structures in the chest based on knowledge of mouse anatomy (see Figure 1A).
   1. Hold the cursor with the computer mouse and scroll up, starting from the whitish abdominal viscera and diaphragm, through the chest and up to the neck.
   2. Identify the bony chest cage landmarks (sternum in the front, vertebrae in the back and ribs on the sides).
   3. Identify the heart in the front of the chest and the major blood vessels near the heart and in the mediastinum.
   4. Observe the trachea lumen (as a small dark circle at the level of the neck and upper chest), which bifurcates into the right and left main bronchi then continue to branch into smaller and smaller bronchi. Note that each bronchus is closely associated with two or three blood vessels (Figure 1A).
4. Start examining the scans of un-induced DT mice and identify the presence of any abnormalities.
   1. Exclude mice with abnormal pre-induction lung shadows (e.g., nodules, emphysematous bullae, etc.) from any further experiments. (Figure 1C-E, G, H).

4. Tumor Induction:

1. To induce tumor development in experimental mice that showed normal lung scans, switch their food from regular chow to doxycycline-containing chow (200 ppm).

5. Follow-up scans:

1. After 10 weeks, perform a second micro-CT scan of all mice to confirm the development of tumor nodules in their lungs (see Figure 2).
2. Split mice into two groups. Administer the FGFR blocker AZD4547 (125 µg/kg/day via a gastric tube for 6 days/week for 10 weeks) to one group and a placebo to the other control group for 10 more weeks.
3. Follow up the changes in the nodular shadows by performing a third scan 4 - 5 weeks later.
4. At the end of 10 weeks of treatment, perform a fourth scan.
5. Euthanize all mice with CO₂ inhalation or with intraperitoneal injection of 0.1 mg/200 µl of pentobarbital.
6. To identify the dynamic changes in the tumor nodules after induction and in response to treatment, identify similar positions within the serial scan images of the same mouse at two or more different time-points then check for the appearance/disappearance of any abnormal shadows (Figure 3).
7. To facilitate the identification of the same plane in the same mouse at different time-points, try to associate the plane of interest with anatomical landmark structures within the mouse chest.
   1. Use landmarks such as the trachea, its bifurcation, the right and left main bronchi, aorta, diaphragm, and large blood vessels.
      Note: Chest bones, including the thoracic vertebrae, ribs, and sternum are less useful as positioning landmarks because of common minor tilts in mouse body alignment on the sample bed, which increase the possibility of misinterpretation of the scan position. Similarly, the image serial number within the scan file is unreliable for identifying the same position over time because of the change in mouse body length from one time-point to another. Failure or inaccuracy in identifying the same plane at different time points may result in false positive/negative interpretation of findings.

6. Mouse Euthanasia and Lung Collection:

1. Euthanize mice with CO₂ inhalation or with intraperitoneal injection of 0.1 mg/200 µl of pentobarbital.
2. Expose the abdominal viscera by cutting longitudinally through the abdominal wall. Bleed the mouse to reduce the volume of blood in the lungs by dissecting the abdominal aorta.
3. Slit the diaphragm with fine scissors; this will result in loss of the negative pressure from the chest cavity, thus collapsing the lungs. Expose the lungs and heart by cutting and removing parts of the ribs of the anterior chest wall. Clean the frontal part of the neck by cutting the skin and soft tissues to expose the trachea.
4. Cut away the heart and thymus gland. Insert forceps behind the trachea to separate it from the esophagus.
5. Cannulate the trachea with a G24 cannula then secure it in place by tightening a thread around the inserted part.
6. Inflate and fix the lung using ice-cold 4% paraformaldehyde (PFA) through the tracheal cannula using a 25 cm column. Detach the cannula and tighten the thread to prevent PFA leakage then cut the upper trachea off its attachment to the larynx.
7. Pull the trachea from the suture thread and dissect it from its attachment, and continue downward to remove it with the lung en-block. Insert it into a 15 ml tube containing 5 ml of 4% PFA. Leave the lungs in PFA O/N to ensure complete tissue penetration and fixation, then process the tissue into a standard paraffin block⁸.
8. Cut paraffin blocks into 6 um-thick slices on a microtome and stain with hematoxylin and eosin using standard techniques.

7. Histological Evaluation:

Note: Although the use of a "slide scanner" for digital histological evaluation is described here, the use of regular microscopes and visual histological evaluation for assessment is also possible.

1. Turn on the slide scanner instrument and computer.
2. Click on the "NDP scan" software.
3. Select the scan mode "Batch of slides" and "Semi-Auto Mode" for scanning a series of slides.
   Note: The robotic arm that picks up the slides during sequential scanning is very sensitive to any irregularities on the edges of the glass slides.
4. Palpate the edges of all glass slides before loading them into the machine. If there is any protrusion of the cover glass or dried mounting medium, clean it off with a cutter or a scalpel.
5. Load the slides into a slide cassette. Open the specimen hatch and slide the cassette into position "one". Close the door.
6. On the computer software, give short descriptive names to all slides in their corresponding position in the cassette then click the "OK" button.
7. Select the profile mode: "Brightfield".
8. Click on "Start Batch" to start the provisional scanning.
   Note: Once the machine has finished scanning all the slides, the software will automatically detect areas with tissues on all the slides and suggest it as a region of interest.
9. If needed, redefine the region of interest by holding down the left mouse button and pulling the region border.
   Note: Defining excessively large areas of the slides as the regions of interest will result in a much longer scan time.
10. Once satisfied with the regions of interests on all of the slides, click on "Scan" to start scanning all slides.
    Note: The scanned files can be observed digitally in low and high resolution, and images can be exported as JPEG files.

Results

Identification of mice with lung abnormalities was performed at baseline. Before tumor induction, when the DT mice were 8 - 12 weeks of age, the lungs of all mice were scanned with micro-CT. Surprisingly, approximately 50% of mice showed abnormalities that forced us to deem them unsuitable for inclusion in the subsequent study. These abnormalities were nodule-like shadows, large single or multiple small emphysematous bullae and/or lobar atelectasis (Figure 1A, C, D-E, G-H...

Discussion

The micro-CT-based method described here for the real-time identification of lung abnormalities and monitoring of the development of tumor nodules and the response to treatment in lung cancer animal models will enable scientists who are conducting lung cancer-related experiments to plan more accurate and efficient experiments while saving time and resources. We have previously used MRI for the same purpose⁶. The clarity of the scan and threshold for the detection of lung nodules with MRI were inferior to those...

Materials

Name	Company	Catalog Number	Comments
micro-X-ray–computed tomography	Rigaku	R_mCT2
NanoZoomer RS Digital Pathology System	Hamamatsu	RS C10730
NDP.view2 Viewing software	Hamamatsu	U12388-01	http://www.hamamatsu.com/jp/en/U12388-01.html
Isoflurane Vaporizer - Funnel-Fill	VETEQUIP	911103
Induction chamber, 2 Liter  W9.5×D23×H9.5	VETEQUIP	941444
Isoflurane	Mylan	ES2303-01
AZD 4547	LC Labratories	A-1088
Pentobarbital	Kyoritsu	SOM02-YA1312
G24 cannula	Terumo	SP-FS2419
Paraformaldehyde	Wako	163-20145
Microtome	Leica	RM2265
Doxycycline	SLC Japan/PMI Nutrition International	5TP7
ImageJ software	National Institute of health		http://imagej.nih.gov/ij/
Puralube vet ointment (Occular lubricant)	Dechra	NDC 17033-211-38