Studying the Coding Profiles of Somatic Stimulation on Cardiac-locked Neuronal Responses in the Rat Spinal Dorsal Horn

Summary

We describe a protocol for spinal multichannel extracellular recording alongside cardiac function recording and analyzing the cardiac-locked spinal dorsal horn neurons. This method offers a temporally synchronized framework for studying spinal mechanisms underlying thoracic visceral functional changes induced by acupuncture.

Abstract

Many studies have suggested that electroacupuncture may be beneficial in the treatment and prevention of cardiovascular disease. However, its mechanism remains poorly understood. The thoracic spinal dorsal horn (SDH) plays an important role in integrating and modulating somatic and visceral inputs, which may then influence cardiac control. In contrast to the lumbar SDH, which has been extensively studied, thoracic SDH has been less explored due to the difficulty in surgical exposure and stereotaxic fixation. In this study, we provide a general approach for simultaneously monitoring neuronal activity and cardiac function by combining the recording of electrocardiograms and microelectrode arrays. Furthermore, we describe how to identify cardiac-locked neurons by calculating the firing rate distribution of neuronal activity in sync with heartbeats. The strategy is of great significance for studying the correlation between cardiovascular function and neuronal activity as well as for understanding the somatocardiac reflex triggered by peripheral nerve stimulations.

Introduction

Acupuncture or body surface stimulation, as a prominent therapeutic technique within the framework of Traditional Chinese Medicine (TCM), operates by stimulating specific areas on the body surface. It facilitates multi-level regulation of the organism's functions through the regulation of visceral functions via afferent pathways, central integration, and autonomic efferent nervous mechanisms. Central to this therapy is the concept that targeted stimulation of anatomically defined acupoints induces systemic physiological regulation. Growing clinical evidence supports acupuncture's role as a complementary modality in managing cardiovascular disorders, with demonstrated efficacy in both primary prevention and adjunctive treatment protocols^1,2.

Primary afferents of sensory neurons predominantly terminate in the spinal dorsal horn (SDH), correspondingly, the spinal dorsal horn neurons (SDHNs) play a crucial role in the integration and modulation of somatic inputs^3,4,5. Furthermore, the SDHRNs also receive cardiac afferents and convey visceral information to spinal sympathetic preganglionic neurons (SPNs) for cardiovascular modulation⁶. The cardiac-locked SPNs are located at the lateral corner of the thoracic segment of the spinal cord (T1-T5), with axons projecting to the cervical or thoracic ganglia and subsequently innervating the heart via the cardiac, middle, and lower nerves. As a result, the thoracic spinal cord plays a crucial role in the integration and modulation of somatic and visceral inputs, which may then influence cardiac control. It is thus important to understand how somatic stimulation regulates cardiac function through modulation of the SDHRNs in the thoracic segment of the spinal cord.

Previous studies have demonstrated that electroacupuncture at PC6 (organized in the T3 spinal segment as a homotopic structure-function unit) can alleviate symptoms of myocardial ischemia through modulation of the autonomic nervous system^7,8,9. However, real-time quantitative synchronization of acupuncture's effects on heart rate with nervous system activity has not yet been realized. Only immediate autonomic nervous activity and electrocardiogram (ECG) indicators following acupuncture have been documented. Research connecting SDHNs with visceral physiological functions remains scarce. Owing to the physiological curvature of the thoracic vertebrae and the narrow space between adjacent thoracic vertebral segments, especially T1-T5, accessing these areas is challenging, resulting in scant direct evidence for elucidating the spinal mechanisms underlying acupuncture at the T3 spinal homotopic acupoint PC6 regulating cardiac function in the treatment of CVD.

To better understand the relationship between SDH and acupuncture-mediated cardiac function regulation, synchronous recording of cardiac function and neural activities needs to be implemented. Here, we will provide a general approach for spinal multichannel extracellular recording alongside cardiac function recording as well as analyzing the cardiac-locked SDHRNs. This method offers a temporally synchronized framework for studying spinal mechanisms underlying thoracic visceral functional changes induced by acupuncture.

Protocol

The animal experiment protocol strictly adhered to the requirements of the national standard "Guidelines for Ethical Review of Welfare of Laboratory Animals" (GB/T 35892-2018) and was approved by the Ethics Committee of the institution. Male SPF-grade Sprague-Dawley (SD) rats, aged 6-8 weeks and weighing approximately 220 g, were used in this study. Laboratory gowns, gloves, and masks were worn during all the experiments. The details of the reagents and the equipment used are listed in the Table of Materials. At the endpoint of the experiment, rats were euthanized via cardiac perfusion under deep anesthesia followed by cervical dislocation.

1. Preoperative setup

1. Connect the ventilator circuit to the Y-shaped endotracheal tube, ensuring a secure and airtight interface.
2. Verify proper ventilation by confirming stable airflow, appropriate tidal volume, and respiratory rate settings on the ventilator display.
3. Ensure the absence of condensate or particulate contaminants within the tubing by visually examining all segments under bright illumination.
4. Simultaneously feed the amplified ECG signals into both the electrocardiograph input and the microelectrode array recording system's analog input port using a three-way BNC connector.
5. Route the amplified signals through a three-way BNC splitter to simultaneously connect the electrocardiograph analog input and microelectrode array recording system's analog input port.
6. Establish synchronization triggers by connecting the electrocardiograph's TTL output to the microelectrode array recording system's digital input. Using a BNC-to-Dupont interface cable, initiate concurrent acquisition on both systems, verifying temporal alignment.

2. Preoperative preparation

1. Anesthetization
   1. Induce anesthesia with 3-5% isoflurane by inhalation and then, administer an intraperitoneal injection of pentobarbital sodium (50 mg/kg) to the anesthetized rat. Administer isoflurane for inhalation anesthesia before placing the electrodes, maintaining a concentration of ~1.2%. Proceed only if Assess the depth of anesthesia via toe pinch before proceeding.
   2. Remove the hair from the anterior neck and posterior back of the rats.
   3. Position the rat in a supine position on a warming blanket and apply ointment to the rat's eyes to prevent drying. Observe the respiration rate and check for withdrawal responses by applying pressure to the footpad with forceps.

3. Tracheal intubation

1. Place the rats in a supine position and disinfect the neck area with iodine tincture.
2. Perform a longitudinal incision of approximately 1 cm along the midline of the neck and bluntly dissect the muscle tissue.
3. Once the thyroid gland is exposed, carefully separate the thin membrane between the two thyroid lobes, taking care not to damage the thyroid tissue. Proceed to expose the trachea.
4. Examine the "Y-shaped cannula to confirm that it is completely dry. Employ spring scissors to make a transverse incision in the trachea, followed by the insertion of the cannula into the tracheal opening. Secure the tracheal cannula with 3-0 non-absorbable sutures to prevent air leakage and accidental extubation.
5. Carefully suture the neck muscles and skin and connect the rat to a ventilator. Adjust the respiratory rate to 85 breaths/min and the tidal volume to 3.5 mL, according to the rat's body weight⁷ (Figure 1B).

4. ECG detection

1. Insert three electrodes into the rat's skin: the positive electrode into the left lower limb, the negative electrode into the right upper limb, and the ground electrode into the right lower limb¹⁰.
2. Acquire data using an electrocardiograph (filter settings: low-pass at 100 Hz, high-pass at 1 kHz; sampling frequency: 4 kHz/s). Use ECG recording software to record, save, and analyze data.

5. Pericardial catheterization for drug administration bradykinin (BK)

1. Place the rat in a supine position and disinfect the skin on the chest with iodine.
2. Perform a thoracotomy between the 1st and 3rd costal cartilages on the left upper chest to expose the thymus. Bluntly dissect the thymus along the midline to expose the pericardium (see Figure 1C,D).
3. Use the tip of a glass dissecting needle (0.5 mm in diameter) to make a small opening in the pericardium.
4. Insert a silicone catheter, 10-15 cm in length, with several small holes at its distal end through the incision in the pericardium. Secure the catheter to the chest wall tissue using bioglue.
5. Close the chest cavity layer by layer, ensuring the rat's breathing remains unobstructed (see Figure 1D).

6. Exposure of T3 spinal cord

1. Place the rat in a prone position and perform routine disinfection with iodine. Make an incision of approximately 8 cm along the midline of the back from the T2 to T6 vertebrae.
2. Use spring scissors to cut through the skin and muscle layers, including the trapezius muscle. Insert a retractor between the muscles to further expose the surgical field.
3. Carefully separate the fat and hibernation glands at the anterior aspect of the rat's thoracic vertebrae, avoiding the blood vessels beneath the glands (see Figure 1E).
4. Remove the muscles attaching to the head clamp and the straight portion of the long neck muscles, exposing the spinous processes of T2.
5. Displace the semispinalis and spinalis muscles to expose the vertebral arch from T2 to T6 (see Figure 1E). Use rongeurs to remove the spinous process of the T3 vertebra, thereby exposing the T3 spinal cord.
   NOTE: During the process of exposing the thoracic vertebrae, ensure special attention is given to preserving the spinous process of T2, as it serves as the primary point of force application for subsequent exposure of T3 spinal cord.
6. Remove the dura mater and arachnoid membrane, and drip paraffin oil onto the surface of the spinal cord to maintain the viability of the spinal neurons (see Figure 1F).
   NOTE: The blood vessels of the rat's brown adipose tissue originate at the T3, T4, or T5 lamina and are distributed like a venous sinus. Take care not to touch them, as this could cause excessive blood loss in the rat.

7. Thoracic vertebrae fixation and settings

1. Use a custom spinal clamp to secure the articular processes of T2 and T6. Moisten the surrounding muscles with saline to maintain hydration.
2. Attach the electrode array to the micromanipulator of a stereotactic instrument and insert it vertically into the dorsal horn of the spinal cord at the T3 spinal segment through the dorsal median sulcus, 500 µm lateral to the midline, to a depth of 1,500 µm.
3. Insert the reference electrode into the back muscle (see Figure 1G).
4. Launch the multichannel extracellular recording software and navigate to File | Hardware Configuration; select the 32 channel array from the device interface list; right-click on the selected channel group; and then, choose Properties from the context menu. Configure signal processing parameters: Under the Filter tab, set the bandpass filter (BP) to 250 Hz - 5 kHz; in the Sampling Rate field, input 30 kHz/s; enable spike detection algorithms by checking the box labeled Enable Spike Processing to activate real-time spike sorting and threshold-based event extraction.
   NOTE: Ensure thorough clearance of muscles and tissues surrounding the articular processes of T2 and T6, especially in the region where the custom spinal clamp is applied for spinal fixation, to prevent displacement during subsequent experiments.

8. Somatic and BK stimuli

1. Use BK (1 µg/mL in distilled water) to induce cardiac nociceptive stimulation. Inject 4 µL of the BK solution with a micro-syringe connected to a silicone catheter with several small openings¹¹.
2. Observe heart rate changes (increases or decreases) and neuronal discharge (increases or decreases) in the T3 spinal cord dorsal horn within 30 min of the injection to Identify dynamic interactions between thoracic spinal cord dorsal horn neurons.
3. Perform manual acupuncture at acupoint PC6 (MAPC6) using the stimulation parameter of 1 Hz. PC6 (Neiguan acupoint) is located 2 mm proximal to the carpal joint on the ventral forearm, between the flexor carpi radialis and the median nerve trunk. Insert the needles (0.25 mm x 25 mm) into the PC6 acupoints at a depth of ~3 mm. Compare the changes in neuronal activity and cardiac function before and after the somatic stimuli.

9. Data analysis and processing

1. Import the recorded neural data in ns6 format into the software follows:
   1. File Conversion: Navigate to File | Open to load the ns6 file. Select File | Save As and choose the .nex5 format to generate standardized spike train data.
   2. Spike Sorting: Import the converted .nex5 files into the classification softwarefor neuronal classification. Sort spike waveforms based on waveform characteristics and principal component analysis (PCA), with threshold parameters set at ±3 SD from baseline noise.
   3. Then, execute the relevant code for filtering and categorizing the signals.
2. Analyze cardiac-locked SDRNs.
   1. Taking the R-wave as the reference event, count the number of neuron firings within a 0.2 s window before and after each R-wave.
   2. After counting the R-waves at 50 ms intervals, create a ring event histogram. Normalize the histogram (i.e., subtract the average discharge rate in 0.2s before and after the R-wave event) to obtain the discharge rate distribution of each neuron's activity during the heartbeat.
   3. Assess statistical significance via Monte Carlo¹² permutation testing, implemented with 1,000 shuffled iterations. Obtain the firing rate distribution and confidence interval of the neuron in the process of the randomized heartbeat by randomizing 0.2 s of the time before and after each heartbeat R wave (the range is ± 0.1 s). If the firing distribution of a neuron's heartbeat exceeds (greater than or less than) the 95% confidence interval of the firing rate distribution of the randomized heartbeat process, identify the neuron as a cardiac-locked neuron (see Supplemental File 1).

Results

Following the above protocol, the T3 SDHNs were exposed, with bradykinin (BK) or somatic needling administered to pericardial/acupoint regions. This investigation quantified stimulus-evoked neuronal activation profiles (type/frequency) and concurrent electrocardiographic (ECG) changes during nociceptive visceral input, BK application, and somatosensory modulation.

Figure 2A shows a transverse slice of the rat's T3 spinal cord. On the left side, it illustrates ...

Discussion

Decoding SDH neuronal coding profiles is essential for understanding the neuromodulatory mechanism of acupuncture-induced therapeutic effect on visceral dysfunction. Here, we combined the MEA in vivo recording technique with the ECG recording system to simultaneously record the discharge activity of the T3 SDHNs and the ECG. Cardiac pain stimulation can activate type C nociceptors that innervate the heart and transmit nociceptive information anteriorly through the viscera, DRG, T1-T5 spinal cord, and supraspinal...

Materials

Name	Company	Catalog Number	Comments
Anesthesia System	Kent Scientific	SomnoSuite
Central v6.5	Black Microsystems	Cerebus-128
Fine Scissors	Fine Scissors	Fine Scissors
Friedman-Pearson Rongeurs	Fine Science T ools	16220-14
Gelatin Sponges	Coltene	274-007
Intubation Cannula	Harward Apparatus	73-2737
Isoflurane	RWD	R510
LabChart Professional Software	LabChart Professional Software	Version 8.0
microband electrode array	Neuronexus	A1x32-6mm-50-177
micromanipulator	Narishige	DMA-1510
needles	Zhongyantaihe	0.25 mm x 0.25 mm
NeuroExplorer software (V5.0)	Plexon	V5.0
offline Sorter	Plexon	V4.0
Powerlab	ADInstruments	PL26T04
rats	the Experimental Center of the Academy of Military Medical Sciences of the People's Liberation Army of China
Spinal Adaptor	N/A	N/A	Custom made
Spring Scissors	Fine Science Tools	15023-10
stereotactic instrument	Narishige	SR-5R-HT