Synovial Fluid Analysis to Identify Osteoarthritis

Podsumowanie

Synovial fluid analysis under transmitted, polarized, and compensated light microscopy is used to evaluate the inflammatory or non-inflammatory nature of a sample through simple steps. It is particularly useful in osteoarthritis to detect calcium crystals and identify a more severe subset of osteoarthritis.

Streszczenie

Synovial fluid (SF) analysis is important in diagnosing osteoarthritis (OA). Macroscopic and microscopic features, including total and differential white blood cell (WBC) count, help define the non-inflammatory nature of SF, which is a hallmark of OA. In patients with OA, WBC in SF samples usually does not exceed 2000 cells per microliter, and the percentage of inflammatory cells, such as neutrophils, is very low or absent. Calcium crystals are frequent in SF collected from OA patients. Although their role in the pathogenesis of OA remains unclear, they have been associated with a mild inflammatory process and a more severe disease progression. Recently, calcium crystals have been described in both the early and late stages of OA, indicating that they may play a vital role in diagnosing different clinical subsets of OA and pharmacological treatment. The overall goal of SF analysis in OA is two-fold: to ascertain the non-inflammatory degree of SF and to highlight the presence of calcium crystals.

Wprowadzenie

Osteoarthritis (OA) is a complex and multifactorial chronic joint disease, with an estimated pooled global prevalence of 16% in subjects aged 15 and over, and 23% in subjects aged 40 and over¹. The incidence of OA is expected to increase due to an aging population and an increase in risk factors, such as obesity and metabolic syndrome².

Among the major issues associated with OA are the difficulty in diagnosing the disease in its early stages and currently available treatments limited to pain management and symptomatic slow-acting drugs (SYSADOAs) such as glycosaminoglycans. The diagnosis of OA is based on clinical symptoms and imaging findings. However, the lack of correlation between the two assessments can cause years of delay in OA diagnosis and treatment initiation². OA is characterized by degenerative processes and low-grade inflammation, which can be easily investigated via synovial fluid (SF) analysis. SF is a viscous plasmatic dialysate rich in hyaluronic acid, which lubricates the joint space, provides nutrients and oxygen to cartilage, and removes metabolic waste. SF also acts as a shock absorber, thus protecting the joints during stress and strain³.

SF analysis is a simple and reliable method that must always be performed during the initial evaluation of patients with musculoskeletal symptoms and joint effusions³. Recommendations from the American College of Rheumatology, the British Society for Rheumatology, and others include SF analysis among the diagnostic testing for rheumatic diseases that must be undertaken mainly in evaluating acute monoarthritis^4,5. Total and differential leucocyte counts obtained from SF analysis provide a snapshot of the pathological process occurring in the joint, thus classifying the degree of inflammation. The identification of pathogenic crystals, such as monosodium urate (MSU) and calcium pyrophosphate (CPP) crystals, under polarized light, is vital in the diagnosis and treatment of crystal arthritis (e.g., gout and pseudogout). Furthermore, the presence of microorganisms suggests a diagnosis of septic arthritis.

Calcium crystals are frequent in samples collected from patients with OA⁶. Basic calcium phosphate (BCP) crystals and CPP have been reported in approximately 22% and 23% of SF samples, respectively, from patients with OA⁶. Although their role remains unclear, these crystals have been associated with more severe forms of OA⁷ and are considered an epiphenomenon of the pathological process itself. Calcium crystals have been detected in 100% of tissue samples from OA patients undergoing knee replacement⁸. Furthermore, it has been hypothesized that calcium crystals may be involved in the pathogenesis of OA owing to their inflammatory effects, demonstrated by several studies⁹ and mediated, at least in part, by the NLRP3 inflammasome¹⁰.

More recently, calcium crystals have been described in both early and late stages⁶ of OA, indicating that they may play a vital role in diagnosing different clinical subsets of OA and pharmacological treatment.

The overall goal of SF analysis is twofold: to determine the inflammatory degree of SF and to diagnose crystal or septic arthritis by identifying specific crystals or microorganisms. It is a particularly useful, simple, and reliable tool in diagnosing OA, owing to the typical non-inflammatory pattern with a very low percentage or absence of neutrophils.

Advantages over alternative techniques
SF analysis consists of simple procedures that include total and differential leucocyte counts and crystal search. Manual cell counting performed by expert laboratory technicians^3,11 remains the gold standard for the cytological analysis of synovial and other body fluids. However, due to the time-consuming limitation and the inter- and intra-observer variability of this method, automated cell counters have gradually replaced manual counting in large routine clinical laboratories where blood and urine analyzers have been adapted to enable SF analysis^11,12. Nevertheless, manual counting presents some advantages in specific settings: (1) in the ambulatory, to obtain a total and differential WBC value on time; (2) to identify cell types such as cytophagocytic mononuclear (Reiter) cells or non-hematopoietic cells such as synoviocytes, that automated counters cannot recognize; (3) when the sample is too small to be handled by the instrument; (4) to create local laboratory registries that are readily accessible for research purposes. Another advantage of manual counting is seen insupravital staining, a method that allows the differentiation of cells very quickly and immediately after glass slide preparation. By contrast, traditional stainings, such as the Wright and the May-Grünwald-Giemsa procedures, require air-dried SF smears and time to stain the cells¹³. Although not suitable for time-sensitive routine analyses, these staining methods reveal more detailed cell populations in the sample, including erythrocytes, basophils, eosinophils, polymorphonuclear leukocytes, lymphocytes, and platelets.

Finally, routine SF analysis for crystals is performed using a simple technique based on polarized light microscopy, which provides fast results¹⁴. Alternative methods, such as scanning and electron microscopy, yield more accurate and sensitive results, but their use in everyday clinical practice is not feasible due to high costs and time-consuming sample preparation and analysis.

Protokół

The present protocol complies with the guidelines of the Ethics committee of Padova University Hospital. SF was collected with patient consent from the knee joints of patients receiving therapeutic arthrocentesis for joint effusion at their initial presentation to the clinic or in response to an arthritic flare. Contraindications to the procedure were: coagulopathy, anticoagulant medications, skin lesions, dermatitis, or cellulitis overlying the joint. All SF samples were deidentified.

1. Synovial fluid preparation

1. Transfer the SF samples collected during arthrocentesis of swollen joints¹⁵ into a tube containing anticoagulant (preferably EDTA; see Table of Materials) and to a second tube containing no additive (Figure 1).
2. In suspected cases of infection, aseptically transfer a portion of the SF sample (~ 1 mL) into culture bottles for microbiological testing.
   NOTE: Infection can be suspected as a result of both clinical features (severe tumor, dolor, calor, functio laesa, and at times fever) and macroscopic appearance of the SF (turbidity, color). In this case, the physician prescribes a microbiological analysis, which is performed by a microbiology laboratory.
3. Carry out SF analysis (steps 2-5) as soon as the sample is collected.

2. Macroscopic examination

NOTE: Macroscopic evaluation of SF samples consists of subjective, qualitative, and semiquantitative assessments. There are no reference standard scales, and no control samples are used.

1. Annotate the SF volume expressed in milliliters. Define the color of the sample, which can range from pale to dark yellow. Record the presence of blood.
2. Define the degree of clarity by observing the sample in the backlight and determining the ease of reading a printed page through the fluid tube (Figure 2A).
3. Assess the viscosity by dripping the sample from a disposable pipette. A long string or drop formation indicates good or poor viscosity, respectively (Figure 2B).
4. Assess the presence of particulate materials, including tissue fragments or fibrin, by observing the sample through the tube and in the backlight.

3. Microscopic examination

NOTE: The SF microscopic analysis consists of cytological examination, including total and differential white blood cell (WBC) counts and the search for crystals.

1. Determine the total cell count following the steps below.
   1. Determine the total number of leukocytes in the SF collected in the EDTA tube using a hemocytometer (see Table of Materials).
   2. Draw 0.5 µL of the SF from the EDTA tube using a Malassez-Potain pipette (mark 0.5; see Table of Materials) (Supplementary Figure 1). With the same pipette, draw 9.5 µL of 0.1% methylene blue solution (mark 11). The final dilution is 20-fold.
   3. Mix the pipette by gentle inversion, discard the first drops, and pour the synovial fluid + methylene blue solution into the counting chamber.
   4. Count the cells in two consecutive squares out of nine, and multiply the obtained number by 100 (simplified formula; Supplementary Figure 2). Express WBCs as the number of leukocytes per cubic millimeter.
      NOTE: Simplified formula: Leukocytes (N/mm³) = the number of counted cells in two consecutive squares x 100.
   5. Classify the SF according to the total number of WBCs following previously published reports^16,17 (Table 1).
2. Perform differential cell count.
   1. Determine the percentage of polymorphonuclear (PMN) cells, monocytes, and lymphocytes using supravital or traditional staining^13,18.
   2. For supravital staining, place one small drop of SF in the center of a ready-to-use slide pre-coated with cresyl violet and methylene blue (Supplementary Figure 3; see Table of Materials).
   3. Cover with a coverslip, and place a drop of microscope immersion oil.
   4. Prepare an air-dried SF smear for traditional staining (less suitable for routine analysis). Put a small drop of SF at the end of a clean slide. Using a second slide or a coverslip, spread it along the slide with a forward movement. Let the smear air-dry.
   5. Stain the sample according to a standard May-Grünwald-Giemsa procedure¹⁸.
   6. Examine the slide under the oil immersion objective (1,000x).
   7. Count 100 consecutive cells and distinguish between polymorphonuclear cells, monocytes, and lymphocytes (Figure 3, Supplementary Figure 4).
   8. Express the total number in each category as a percentage.
      ​NOTE: To obtain accurate results, cytological examinations must be performed as soon as the SF is collected or within 24-48 h of arthrocentesis when properly stored (4 °C).

4. Crystal detection

1. Determine the presence of pathological crystals using a polarized light microscope equipped with an additional polarizing filter and a red compensator¹⁹ (see Table of Materials).
2. Perform slide preparation for crystal detection.
   1. Carefully clean a glass slide with optical paper or soft paper imbibed with ethanol. Apply a small drop of SF on the glass slide.
   2. Cover with a coverslip and place the slide under the microscope.
3. Identify the crystals.
   1. Focus the slide under the microscope using a low-power magnification objective. Carefully examine the slide under a bright field with a 40x objective. Look inside and outside the cells.
   2. Identify the crystals according to their size and shape (e.g., rhomboidal, needle-shaped, rod-shaped).
   3. Insert the polarizing filter between the light source and the specimen. Rotate the polarizer until its optical axis is perpendicular to the analyzer (placed above the objectives) to create a dark background.
   4. Once a birefringent crystal has been identified, insert the compensator between the polarizer and the specimen and move it parallel or perpendicular to the optical axis of the crystal.
   5. Observe the color revealed by the crystal (Table 2).
      NOTE: MSU crystals appear needle-shaped, brightly birefringent in the dark field, and display a yellow/orange color when their axis is parallel to the compensator. Conversely, they are blue when positioned perpendicular (negative sign) (Table 2; Figure 4). CPP crystals are rod- or rhomboid-like crystals, weakly birefringent under polarized light, and display a blue or yellow color when they are aligned parallel or perpendicular to the axis of the compensator (positive sign), respectively (Table 2; Figure 5).

5. Alizarin red staining

1. Prepare a 2% solution of alizarin red S (pH 4.1-4.3), filter the solution through a 0.22 µm filter, and store it away from light.
   1. For preparing the slide, mix a drop of SF with the same volume of alizarin red solution (1:1) on a clean slide. Cover with a coverslip and examine at 400x magnification.
   2. Identify the crystals under the microscope.
      NOTE: The test is positive when bright, dark red precipitates are visible under transmitted light, with a round shape and concentric layers. Under polarized light, they appear strongly birefringent²⁰ (Figure 6).

Wyniki

Large joints affected by OA are often swollen and produce significant amounts of SF, which are drained via arthrocentesis¹⁵. The macroscopic characteristics of SF evaluated immediately after arthrocentesis essentially include the quantity, color, clarity, and viscosity¹⁷. Despite their low specificity, they provide preliminary data on the degree of inflammation. The color depends on SF cellularity and the degree of fragmentation of extracellular matrix macromolecul...

Dyskusje

In OA, SF analysis helps define disease characteristics through simple steps: total and differential leukocyte counts and searching for crystals, including CPP and BCP. Furthermore, the detection of MSU crystals may highlight important comorbidities.

Despite low costs and simple execution, the sensibility of the tests and reliability of the results may be affected due to inexperienced analysts-mainly as it pertains to crystal identification. Training and experience of the analyst are crucial i...

Materiały

Name	Company	Catalog Number	Comments
Alizarin red S	Merck	A5533	For BCP crystal search
Burker chamber	Merck	BR718905	For total white blood cell count
Cover glasses	Merck	C7931	For microscopic examination
EDTA tubes	BD	368861	For SF collection
Glass slides	Merck	S8902	For crystal search
Lambda filter (compensator)	Any	Refer to microscope company	For crystal identification
Malassez-Potain pipette	Artiglass	54830000	For dilution of synovial fluid
Methylene blue solution	Merck	3978	For total white blood cell count
Polarized microscope	Leica, Nikon, others	Depending on the model and company	For complete synovial fluid analysis
Polarizing lens	Any	Refer to microscope company	For crystal identification
Testsimplet	Waldeck	14386	Supravital staining for cell differentiation