This work was supported by a Burroughs Wellcome Investigator Award to YM and by a Brown-Coxe Postdoctoral Fellowship from Yale University to MD.

Materials:
<ul>
<li>Protein sample - Lysozyme (50 mg/ mL)</li>
<li>Hanging drop 24-well tray</li>
<li>Sitting drop 24-well tray</li>
<li>Microbatch crystallization 96 well tray</li>
<li>Crystallization solutions (either commercial available or home made)</li>
<li>Silicon grease</li>
<li>5 mL syringe without Luer-lock</li>
<li>Siliconized cover slides</li>
<li>Optical sealing tape</li>
<li>Paraffin</li>
<li>0.1-2 &mu;L micropipette with low-retention tips</li>
<li>Tweezers</li>
<li>Professional wipes</li>
</ul>
1. Hanging/sitting Drop Procedure:
<ol>
<li>For an initial screen one can use commercially available screens that exploit the sparse matrix incomplete factorial method of trial conditions. The sparse matrix incomplete factorial method is biased by and selected from known crystallization conditions for macromolecules (Carter and Carter, 1979; Cudney et al., 1994; Jancarik and Kim, 1991; Jancarik et al., 1991). If the crystallization condition is already known, a narrow screen can be assembled, varying the precipitant concentration and pH around the original hit. The most commonly successful precipitant is polyethylene glycol (PEG), followed by ammonium sulfate. Together, these two precipitants account for approximately 60% of all recorded macromolecular precipitants used for crystallization (Gilliland et al., 1994; Kimber et al., 2003; Page et al., 2003).</li>
<li>Prepare your crystallization solutions. Usually these conditions are combined from a precipitating agent, salt of some kind and a buffer to set the pH. In some cases additives may be added specifically for the protein of interest. All stock solution should be filtered using 0.22 &mu;m filter. Some of the stock solution might be very viscous (50% PEGs, glycerol, PEG-MME, etc ).
<ul>
<li>Prepare 1.5 mL of 0.6, 0.8, 1.0, 1.2, 1.4, 1.6 M NaCl each in 0.1 M NaOAc pH 4.0, 4.3, 4.6 and 4.9 (total of 24 solutions)</li>
</ul></li>
<li>Thaw your protein sample and keep on ice. Protein stocks should be stored at -80&deg;C unless the protein of interest is sensitive to freeze/thaw cycles (if so, store at 4&deg;C). Typical protein concentrations are in the range of 5-50 mg/ mL, with higher concentrations usually giving better results.</li>
<li>Spin the sample 15min/18,000xg/4&deg;C - some proteins tend to partially aggregate and precipitate after a thaw step. These aggregates can promote amorphous precipitation of the rest of the protein molecules therefore thorough spin down will ensure you have only soluble molecules in your sample. Keep protein on ice until setting up the tray.</li>
<li>Determine the protein concentration from its absorbance at 280 nm using a UV spectrophotometer. The protein concentration can be calculated from the absorbance reading and the protein's extinction coefficient. The extinction coefficient can be calculated with the ProtParam tool on the Expasy website: <a href="http://ca.expasy.org/tools/protparam.html">http://ca.expasy.org/tools/protparam.html</a></li>
<li>Fill wells of the 24-well hanging/sitting drop tray with 500 &mu;L of precipitant solution according to the tray setup scheme (Figure 2B). Create a silicone grease ring around the edge of the well. The ring should have a small gap to prevent air pressure buildup as the well is sealed. In sitting drops, there is no need for grease since the well is sealed with tape (Figure 2A).</li>
<li>Take a cover slide and clean it with condensed air spray, or a professional wipe - avoiding dust will ease the interpretation of the crystallization drop and eliminate contaminations. For sitting drops, cover slide are not used. Instead, the well contains a shelf on which the protein and precipitant are mixed.</li>
<li>Put equal volumes of the protein sample and reservoir solution on the cover slide. Different volumes of protein and precipitant may be tried as part of optimization process. Using more protein than precipitant results in a net concentration of the protein in the drop after equilibration, which can be desirable for dilute protein samples, and to slow crystal nucleation or growth. Any other nonvolatile substance in the drop solution will also be concentrated by the same factor. When pipetting the protein and reservoir solutions onto the cover slide, be extremely careful to avoid bubble formation. This often occurs when air is blown out of the pipette.
<ul>
<li>Hanging drop: Load 2 &mu;L of 50 mg/ mL lysozyme in 0.02 M NaOAc pH 4.9 to the center of the cover slide and add to it 2 &mu;L of the reservoir solution.</li>
<li>Sitting drop: Load 2 &mu;L of 50 mg/ mL lysozyme solution to the center of the shelf and add to it 2 &mu;L of reservoir solution.</li>
</ul></li>
<li>Flip the cover slide gently and lay it down on the grease ring on top of the well. Press down gently so that air can escape from the well through the notch in the grease to prevent air pressure buildup in the well and keep the well sealed. Air pressure buildup in the well can raise the cover slide, compromising the well seal. In the sitting drop method, optically clear transparent tape is used to cover the wells. Hence, in this method sealing will take place every row/column.</li>
<li>Move on to the next well until tray is complete.</li>
<li>Check the tray upon setup - eliminating dust particles and other contaminations can reduce the false positive identification of protein crystals.</li>
<li>Use a scoring sheet to document your experiment.</li>
<li>Place the tray at the desired incubation temperature, generally between 4&deg;C and room temperature. 20&deg;C is most commonly successful. Take care to handle the tray gently and avoid any shaking. Be careful while opening and closing the incubator door. Vibrations or temperature changes during transfer or incubation can prevent crystal growth or negatively affect crystal quality. A shock absorbing material (e.g. packing foam) can be used as padding under the crystal trays.</li>
<li>Check the tray for crystals the following day, and then every few days, always handling the trays with care. Document any findings and drop morphologies in a tray specific scoring sheet. Crystals typically take 2-5 days to appear, although crystals occasionally appear much sooner (almost immediately) or later (up to several months!). Once crystallization conditions have been identified and the growth rate of the crystals is known, it is best to leave the trays undisturbed until crystals have appeared and grown to at least half of their final size. Leaving the trays undisturbed can reduce the number of crystal nucleation events, hence producing smaller numbers of larger crystals.</li>
</ol>
2. Microbatch Procedure:
<ol>
<li>Protein sample and precipitant preparation are as described above.</li>
<li>Air spray a new microbatch tray to avoid dust and other large particles.</li>
<li>In the microbatch tray, fill paraffin oil up to 3 mm high (just enough to cover the wells). Remove access of oil.</li>
<li>Load 1 &mu;L of protein solution (50 mg/ mL lysozyme) into the oil pre-filled well - make sure to pipette the solution directly to the bottom of the well (Figure 2A).</li>
<li>Load 1 &mu;L of precipitant solution into the well according to the tray setup scheme (Figure 2B) - make sure the drop sinks to the bottom of the well and fuses with the protein droplet.</li>
<li>Move to the next well until tray is complete.</li>
<li>Follow steps 11-14 of the hanging/sitting drop procedure.</li>
</ol>

<ol>
	<li>Bergfors, T. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> Protein crystallization : techniques, strategies, and tips : a laboratory manual. , (1999).</li><li>Carter, C. W., Carter, C. W. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Protein+crystallization+using+incomplete+factorial+experiments.">Protein crystallization using incomplete factorial experiments.</a> J Biol Chem. 254, 12219-12223 (1979).</li><li>Cudney, R., Patel, S., Weisgraber, K., Newhouse, Y., McPherson, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Screening+and+optimization+strategies+for+macromolecular+crystal+growth.">Screening and optimization strategies for macromolecular crystal growth.</a> Acta Crystallogr D Biol Crystallogr. 50, 414-423 (1994).</li><li>Dessau, M., Chamovitz, D. A., Hirsch, J. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Expression,+purification+and+crystallization+of+a+PCI+domain+from+the+COP9+signalosome+subunit+7+(CSN7).">Expression, purification and crystallization of a PCI domain from the COP9 signalosome subunit 7 (CSN7).</a> Acta Crystallogr Sect F Struct Biol Cryst Commun. 62, 1138-1140 (2006).</li><li>Gilliland, G. L., Tung, M., Blakeslee, D. M., Ladner, J. E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Biological+Macromolecule+Crystallization+Database,+Version+3.0:+new+features,+data+and+the+NASA+archive+for+protein+crystal+growth+data.">Biological Macromolecule Crystallization Database, Version 3.0: new features, data and the NASA archive for protein crystal growth data.</a> Acta Crystallogr D Biol Crystallogr. 50, 408-413 (1994).</li><li>Jancarik, J., Kim, S. H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Sparse+matrix+sampling:+a+screening+method+for+crystallization+of+proteins.">Sparse matrix sampling: a screening method for crystallization of proteins.</a> J Appl Cryst. 23, 409-411 (1991).</li><li>Jancarik, J., Scott, W. G., Milligan, D. L., Koshland, D. E., Kim, S. H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Crystallization+and+preliminary+X-ray+diffraction+study+of+the+ligand-binding+domain+of+the+bacterial+chemotaxis-mediating+aspartate+receptor+of+Salmonella+typhimurium.">Crystallization and preliminary X-ray diffraction study of the ligand-binding domain of the bacterial chemotaxis-mediating aspartate receptor of Salmonella typhimurium.</a> J Mol Biol. 221, 31-34 (1991).</li><li>Kimber, M. S., Vallee, F., Houston, S., Necakov, A., Skarina, T., Evdokimova, E., Beasley, S., Christendat, D., Savchenko, A., Arrowsmith, C. H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Data+mining+crystallization+databases:+knowledge-based+approaches+to+optimize+protein+crystal+screens.">Data mining crystallization databases: knowledge-based approaches to optimize protein crystal screens.</a> Proteins. 51, 562-568 (2003).</li><li>Lorber, B., Sauter, C., Theobald-Dietrich, A., Moreno, A., Schellenberger, P., Robert, M. C., Capelle, B., Sanglier, S., Potier, N., Giege, R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Crystal+growth+of+proteins,+nucleic+acids,+and+viruses+in+gels.">Crystal growth of proteins, nucleic acids, and viruses in gels.</a> Prog Biophys Mol Biol. 101, 13-25 (2009).</li><li>McPherson, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> Crystallization of biological macromolecules. , (1999).</li><li>McPherson, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Introduction+to+protein+crystallization.">Introduction to protein crystallization.</a> Methods. 34, 254-265 (2004).</li><li>Page, R., Grzechnik, S. K., Canaves, J. M., Spraggon, G., Kreusch, A., Kuhn, P., Stevens, R. C., Lesley, S. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Shotgun+crystallization+strategy+for+structural+genomics:+an+optimized+two-tiered+crystallization+screen+against+the+Thermotoga+maritima+proteome.">Shotgun crystallization strategy for structural genomics: an optimized two-tiered crystallization screen against the Thermotoga maritima proteome.</a> Acta Crystallogr D Biol Crystallogr. 59, 1028-1037 (2003).</li></ol>

No conflicts of interest declared.

In this article we describe and demonstrate general current protocols for protein crystallization. Since it a multi-step procedure there are few considerations one needs to be aware of. When working with very small volumes (0.5-2 &mu;L), drying of the drop due to evaporation is a major concern. Hence, it is recommended to work in a well-controlled environment (with low air flow, high humidity and tight temperature control) and to adopt a technique that minimizes exposure of the drop to the open air. For this reason, it ...

<table border="1">
		<tbody>
<tr>
<td>New Item</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
</tr>
<tr>
<td>Lysozyme</td>
<td>&nbsp;</td>
<td>Sigma-aldrich</td>
<td>L6876-1G</td>
<td>&nbsp;</td>
</tr>
<tr>
<td>24 well VDX Plate</td>
<td>&nbsp;</td>
<td>Hampton research</td>
<td>HR3-142</td>
<td>&nbsp;</td>
</tr>
<tr>
<td>24 well Cryschem Plate</td>
<td>&nbsp;</td>
<td>Hampton research</td>
<td>HR3-158</td>
<td>&nbsp;</td>
</tr>
<tr>
<td>Dow Corning Vacuum Grease</td>
<td>&nbsp;</td>
<td>Hampton research</td>
<td>HR3-510</td>
<td>&nbsp;</td>
</tr>
<tr>
<td>Siliconized glass circle coverslides</td>
<td>&nbsp;</td>
<td>Hampton research</td>
<td>HR3-231</td>
<td>&nbsp;</td>
</tr>
<tr>
<td>100% paraffin oil</td>
<td>&nbsp;</td>
<td>Hampton research</td>
<td>HR3-411</td>
<td>&nbsp;</td>
</tr>
<tr>
<td>1.88 inch wide Crystal Clear Sealing Tape</td>
<td>&nbsp;</td>
<td>Hampton research</td>
<td>HR3-511</td>
<td>&nbsp;</td>
</tr>
<tr>
<td>96 Well Imp@ct Plate (Microbatch plate)</td>
<td>&nbsp;</td>
<td>Hampton research</td>
<td>HR3-098</td>
<td>&nbsp;</td>	</tr>	</tbody>
		</table>

protein crystallization for x-ray crystallography

Using the three-dimensional structure of biological macromolecules to infer how they function is one of the most important fields of modern biology. The availability of atomic resolution structures provides a deep and unique understanding of protein function, and helps to unravel the inner workings of the living cell. To date, 86% of the Protein Data Bank (rcsb-PDB) entries are macromolecular structures that were determined using X-ray crystallography.
To obtain crystals suitable for crystallographic studies, the macromolecule (e.g. protein, nucleic acid, protein-protein complex or protein-nucleic acid complex) must be purified to homogeneity, or as close as possible to homogeneity. The homogeneity of the preparation is a key factor in obtaining crystals that diffract to high resolution (Bergfors, 1999; McPherson, 1999).
Crystallization requires bringing the macromolecule to supersaturation. The sample should therefore be concentrated to the highest possible concentration without causing aggregation or precipitation of the macromolecule (usually 2-50 mg/ mL). Introducing the sample to precipitating agent can promote the nucleation of protein crystals in the solution, which can result in large three-dimensional crystals growing from the solution. There are two main techniques to obtain crystals: vapor diffusion and batch crystallization. In vapor diffusion, a drop containing a mixture of precipitant and protein solutions is sealed in a chamber with pure precipitant. Water vapor then diffuses out of the drop until the osmolarity of the drop and the precipitant are equal (Figure 1A). The dehydration of the drop causes a slow concentration of both protein and precipitant until equilibrium is achieved, ideally in the crystal nucleation zone of the phase diagram. The batch method relies on bringing the protein directly into the nucleation zone by mixing protein with the appropriate amount of precipitant (Figure 1B). This method is usually performed under a paraffin/mineral oil mixture to prevent the diffusion of water out of the drop.
Here we will demonstrate two kinds of experimental setup for vapor diffusion, hanging drop and sitting drop, in addition to batch crystallization under oil.

Crystallization is usually referred to as the bottleneck of X-ray crystallography. A sparse matrix incomplete factorial screen of precipitating conditions typically produces many different types of protein aggregation and precipitation, among them large single crystals. If the protein or precipitant concentrations are too high one can see brown matter with no distinct shape and size (amorphous precipitation). When the solution is undersaturated, the drop will often be completely clear and devoid of any kind of precipitat...

Watch this Scientific Journal Video about Protein Crystallization for X-ray Crystallography at JoVE.com

Protein Crystallization for X-ray Crystallography

The 3-D structure of a molecule provides a unique understanding of how the molecule functions. The principal method for structure determination at near-atomic resolution is X-ray crystallography. Here, we demonstrate the current methods for obtaining three-dimensional crystals of any given macromolecule that are suitable for structure determination by X-ray crystallography.

Using the three-dimensional structure of biological macromolecules to infer how they function is one of the most important fields of modern biology. The ...

protein-crystallization-for-x-ray-crystallography

Research

JoVE Journal

Biology

62.8K Views.  Yale University. The 3-D structure of a molecule provides a unique understanding of how the molecule functions. The principal method for structure determination at near-atomic resolution is X-ray crystallography. Here, we demonstrate the current methods for obtaining three-dimensional crystals of any given macromolecule that are suitable for structure determination by X-ray crystallography.