This work was funded in part by the Texas Emerging Technology Fund (Startup to TB), the Texas State University Research Enhancement Program, the Texas State University Doctoral Research Fellowship (to TC), the NSF Partnership for Research and Education in Materials (PREM, DMR-1205670), The Welch Foundation (AI-0045), and National Institutes of Health (R01CA032132).

Caution: Please consult all relevant Safety Data Sheets (SDS) before use. Several of the reagents used in these syntheses are potentially hazardous. Please use all appropriate safety practices including personal protective equipment (safety glasses, gloves, lab coat, long pants, and closed-toe shoes), and perform syntheses in fume hoods. Lithiation is particularly hazardous and should only be performed by properly trained individuals with supervision.
1. Monomer Synthesis
<p class="jove_cont...

<ol>
	<li>Irvin, J., Irvin, D., Stenger-Smith, J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Electrically+active+polymers+for+use+in+batteries+and+supercapacitors.">Electrically active polymers for use in batteries and supercapacitors.</a> Handbook of Conducting Polymers. , (2007).</li><li>Amb, C. M., Dyer, A. L., Reynolds, J. R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Navigating+the+color+palette+of+solution-processable+electrochromic+polymers.">Navigating the color palette of solution-processable electrochromic polymers.</a> Chemistry of Materials. 23 (3), 397-415 (2011).</li><li>Beaujuge, P. M., Reynolds, J. R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Color+control+in+pi-conjugated+organic+polymers+for+use+in+electrochromic+devices.">Color control in pi-conjugated organic polymers for use in electrochromic devices.</a> Chemical Reviews. 110 (1), 268-320 (2010).</li><li>Ananthakrishnan, N., Padmanaban, G., Ramakrishnan, S., Reynolds, J. R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Tuning+polymer+light-emitting+device+emission+colors+in+ternary+blends+composed+of+conjugated+and+nonconjugated+polymers.">Tuning polymer light-emitting device emission colors in ternary blends composed of conjugated and nonconjugated polymers.</a> Macromolecules. 38 (18), 7660-7669 (2005).</li><li>Zhu, Y., Otley, M. T., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Neutral+color+tuning+of+polymer+electrochromic+devices+using+an+organic+dye.">Neutral color tuning of polymer electrochromic devices using an organic dye.</a> Chemical Communications, Cambridge, England. 50 (60), 8167-8170 (2014).</li><li>Kline, W. M., Lorenzini, R. G., Sotzing, G. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+review+of+organic+electrochromic+fabric+devices.">A review of organic electrochromic fabric devices.</a> Coloration Technology. 130 (2), 73-80 (2014).</li><li>Gerard, M., Chaubey, A., Malhotra, B. D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Application+of+conducting+polymer+to+biosensors.">Application of conducting polymer to biosensors.</a> Biosensors &amp; Bioeletronics. 17, 345-359 (2002).</li><li>Abidian, M. R., Kim, D. -. H., Martin, D. C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Conducting-polymer+nanotubes+for+controlled+drug+release.">Conducting-polymer nanotubes for controlled drug release.</a> Advanced materials. 18 (4), 405-409 (2006).</li><li>Ge, D., Qi, R., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+self-powered+and+thermally-responsive+drug+delivery+system+based+on+conducting+polymers.">A self-powered and thermally-responsive drug delivery system based on conducting polymers.</a> Electrochemistry Communications. 12 (8), 1087-1090 (2010).</li><li>George, P. M., LaVan, D. A., Burdick, J. A., Chen, C. -. Y., Liang, E., Langer, R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Electrically+controlled+drug+delivery+from+biotin-doped+conductive+polypyrrole.">Electrically controlled drug delivery from biotin-doped conductive polypyrrole.</a> Advanced Materials. 18 (5), 577-581 (2006).</li><li>Li, Y., Neoh, K. G., Kang, E. T. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Controlled+release+of+heparin+from+polypyrrole-poly(vinyl+alcohol)+assembly+by+electrical+stimulation.">Controlled release of heparin from polypyrrole-poly(vinyl alcohol) assembly by electrical stimulation.</a> Journal of biomedical materials research. Part A. 73 (2), 171-181 (2005).</li><li>Svirskis, D., Travas-Sejdic, J., Rodgers, A., Garg, S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Electrochemically+controlled+drug+delivery+based+on+intrinsically+conducting+polymers.">Electrochemically controlled drug delivery based on intrinsically conducting polymers.</a> Journal of controlled release: official journal of the Controlled Release Society. 146 (1), 6-15 (2010).</li><li>Cheng, L., Yang, K., Chen, Q., Liu, Z. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Organic+stealth+nanoparticles+for+highly+effective+in+vivo+near-infrared+photothermal+therapy+of+cancer.">Organic stealth nanoparticles for highly effective in vivo near-infrared photothermal therapy of cancer.</a> ACS Nano. 6 (6), 5605-5613 (2012).</li><li>Chougule, M. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Synthesis+and+characterization+of+polypyrrole+(PPy)+thin+films.">Synthesis and characterization of polypyrrole (PPy) thin films.</a> Soft Nanoscience Letters. 01 (01), 6-10 (2011).</li><li>Yang, K., Xu, H., Cheng, L., Sun, C., Wang, J., Liu, Z. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=In+vitro+and+in+vivo+near-infrared+photothermal+therapy+of+cancer+using+polypyrrole+organic+nanoparticles.">In vitro and in vivo near-infrared photothermal therapy of cancer using polypyrrole organic nanoparticles.</a> Advanced materials. 24 (41), 5586-5592 (2012).</li><li>Diniz, S. N., Sosnik, A., Mu, H., Valduga, C. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Nanobiotechnology.">Nanobiotechnology.</a> BioMed research international. 2013, (2013).</li><li>Weissleder, R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+Clearer+Vision+for+in+vivo+Imaging.">A Clearer Vision for in vivo Imaging.</a> Nature Biotechnology. , (2001).</li><li>Irvin, J., Reynolds, J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Low-oxidation-potential+conducting+polymer:+alternating+substituted+para-phenylene+and+3,4-ethylenedioxythiophene+repeat+units.">Low-oxidation-potential conducting polymer: alternating substituted para-phenylene and 3,4-ethylenedioxythiophene repeat units.</a> Polymer. 39 (11), 2339-2347 (1998).</li><li>Yang, Y., Oldenhius, N., Buchwald, S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Mild+and+general+condition+for+Negishi+cross-coupling+enabled+by+the+use+of+palladacycle+percatalysts.">Mild and general condition for Negishi cross-coupling enabled by the use of palladacycle percatalysts.</a> Angew Chem. 29 (6), 997-1003 (2012).</li><li>Negishi, E., Hu, Q., Huang, Z., Qian, M., Wang, G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+Negishi+Coupling:+an+update:+Enantiopure+sulfoxides+and+sulfinamides.+New+products+from+Aldrich+R+&amp;+D.">The Negishi Coupling: an update: Enantiopure sulfoxides and sulfinamides. New products from Aldrich R &amp; D.</a> Aldrichchimica Acta. 38 (3), (2005).</li><li>Bilati, U., All&#233;mann, E., Doelker, E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Development+of+a+nanoprecipitation+method+intended+for+the+entrapment+of+hydrophilic+drugs+into+nanoparticles.">Development of a nanoprecipitation method intended for the entrapment of hydrophilic drugs into nanoparticles.</a> European Journal of Pharmaceutical Sciences. 24 (1), 67-75 (2005).</li><li>Nagavarma, B. V. N., Yadav, H. K. S., Ayaz, A., Vasudha, L. S., Shivakumar, H. G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Different+techniques+for+preparation+of+polymeric+nanopaticles-A+review.">Different techniques for preparation of polymeric nanopaticles-A review.</a> Asian Journal of Pharaceutical and Clinical Research. 5 (3), 16-23 (2012).</li><li>Vaitkuviene, A., Kaseta, V., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Evaluation+of+cytotoxicity+of+polypyrrole+nanoparticles+synthesized+by+oxidative+polymerization.">Evaluation of cytotoxicity of polypyrrole nanoparticles synthesized by oxidative polymerization.</a> Journal of Hazardous Materials. 250-251, 167-174 (2013).</li><li>Han, Y. K., Yih, J. N., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Facile+synthesis+of+aqueous-dispersible+nano-PEDOT:PSS-co-MA+core/shell+colloids+through+spray+emulsion+polymerization.">Facile synthesis of aqueous-dispersible nano-PEDOT:PSS-co-MA core/shell colloids through spray emulsion polymerization.</a> Macromolecular Chemistry and Physics. 212 (4), 361-366 (2011).</li><li>Winkel, K. L., Carberry, J. R., Irvin, J. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Synthesis+and+electropolymerization+of+3,5-bis-(3,4-ethylenedioxythien-2-yl)-4,4-dimethyl+isopyrazole:+A+donor-acceptor-donor+monomer.">Synthesis and electropolymerization of 3,5-bis-(3,4-ethylenedioxythien-2-yl)-4,4-dimethyl isopyrazole: A donor-acceptor-donor monomer.</a> Journal of the Electrochemical Society. 160 (8), G111-G116 (2013).</li><li>Hoye, T., Eklov, B., Voloshin, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=No-D+NMR+spectroscopy+as+a+convenient+method+for+titering.">No-D NMR spectroscopy as a convenient method for titering.</a> Organic Letters. 6 (15), 2567-2570 (2004).</li><li>Umezawa, K., Oshima, T., Yoshizawa-Fujita, M., Takeoka, Y., Rikukawa, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Synthesis+of+hydrophilic-hydrophobic+block+copolymer+ionomers+based+on+polyphenylenes.">Synthesis of hydrophilic-hydrophobic block copolymer ionomers based on polyphenylenes.</a> ACS Macro Letters. 1 (8), 969-972 (2012).</li><li>Tao, Z., Fan, H., Zhou, J., Jin, Q. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Conjugated+polyelectrolyte+with+pendant+caboxylate+groups:+synthesis,+photophysics,+and+pH+responses+in+the+presence+of+surfactants.">Conjugated polyelectrolyte with pendant caboxylate groups: synthesis, photophysics, and pH responses in the presence of surfactants.</a> Journal of Polymer Science Part A-Polymer Chemistry. 46 (3), 830-843 (2008).</li><li>Winkel, K. L., Carberry, J. R., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Donor-acceptor-donor+polymers+utilizing+pyrimidine-based+acceptors.">Donor-acceptor-donor polymers utilizing pyrimidine-based acceptors.</a> Reactive &amp; Functional Polymers. 83, 113-122 (2014).</li><li>Kr&#242;l, E., Scheffers, D. -. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=FtsZ+polymerization+assays:+simple+protocols+and+considerations.">FtsZ polymerization assays: simple protocols and considerations.</a> Journal of Visualized Experiments : JoVE. (81), e50844 (2013).</li><li>Zolnik, B., Potter, T. M., Stern, S. T. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Zeta+potential+measurement.">Zeta potential measurement.</a> Methods in Molecular Biology. 697, 173-179 (2011).</li><li>Nogi, K., Naito, M., Yokoyama, T. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> Nanoparticle technology handbook. , (2012).</li><li>Pattani, V. P., Tunnell, J. W. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Nanoparticle-mediated+photothermal+therapy:+A+comparative+study+of+heating+for+different+particle+types.">Nanoparticle-mediated photothermal therapy: A comparative study of heating for different particle types.</a> Lasers in Surgery and Medicine. 44 (8), 675-684 (2012).</li><li>Subianto, S., Will, G. D., Kokot, S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Templated+electropolymerization+of+pyrrole+in+a+capillary.">Templated electropolymerization of pyrrole in a capillary.</a> Journal of Polymer Science, Part A: Polymer Chemistry. 41 (12), 1867-1869 (2003).</li><li>Sgouras, D., Duncan, R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Methods+for+the+evaluation+of+biocompatibility+of+soluble+synthetic+polymers+which+have+potential+for+biomedical+use:+use+of+the+tetrazolium-based+colorimetric+assay+(MTT)+as+a+preliminary+screen+for+evaluation+of+in+vitro+cytotoxicity.">Methods for the evaluation of biocompatibility of soluble synthetic polymers which have potential for biomedical use: use of the tetrazolium-based colorimetric assay (MTT) as a preliminary screen for evaluation of in vitro cytotoxicity.</a> Journal of Materials Science: Materials in Medicine. 1 (2), 61-68 (1990).</li><li>Ahmadian, S., Barar, J., Saei, A. A., Fakhree, M. A. A., Omidi, Y. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Cellular+toxicity+of+nanogenomedicine+in+MCF-7+cell+line:+MTT+assay.">Cellular toxicity of nanogenomedicine in MCF-7 cell line: MTT assay.</a> Journal of Visualized Experiments : JoVE. (26), (2009).</li><li>Huang, X., Kang, B., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Comparative+study+of+photothermolysis+of+cancer+cells+with+nuclear-targeted+or+cytoplasm-targeted+gold+nanospheres:+continuous+wave+or+pulsed+lasers.">Comparative study of photothermolysis of cancer cells with nuclear-targeted or cytoplasm-targeted gold nanospheres: continuous wave or pulsed lasers.</a> Journal of Biomedical Optics. 15 (5), 058002 (2015).</li></ol>

In this work, electroactive polymer NPs have been synthesized as potential PTT agents for cancer treatment. The preparation of the NPs is described, starting with the synthesis of the monomers followed by emulsion polymerization. While the preparation of NPs using electroactive polymers such as EDOT and pyrrole has been described before, this paper describes the preparation of polymeric NPs starting with unique extended conjugation monomers, demonstrating that this process can be extended to larger, more complex monomers...

Electroactive polymers change their properties (color, conductivity, reactivity, volume, etc.) in the presence of an electric field. The rapid switching times, tunability, durability, and lightweight characteristics of electroactive polymers have led to many proposed applications, including alternative energy, sensors, electrochromics, and biomedical devices. Electroactive polymers are potentially useful as flexible, light-weight battery and capacitor electrodes.1 Applications of electroactive polymers in electrochromic devices include glare-reduction systems for buildings and automobiles, sunglasses, protective eyewear, optical storage devices, and smart textiles.2-5 Smart windows can reduce energy requirements by blocking specific wavelengths of light on-demand and protecting interiors of homes and automobiles. Smart textiles can be used in clothing to help protect against UV radiation.6 Electroactive polymers have also begun to be used in medical devices. Among electroactive polymers used in biomedical devices, polypyrrole (PPy), polyaniline (PANI), and poly(3,4-ethylenedioxythiophene) (PEDOT) are among the most common. For example, these types of polymers are commonly used as transducers in biosensor devices.7 Applications in therapeutic delivery have also shown promise; studies have demonstrated the release of drugs and therapeutic proteins from devices prepared from electroactive polymers.8-12 More recently, electroactive polymers have been used as therapeutic agents in photothermal therapy.13-15 In photothermal therapy, photothermal agents must absorb light in the near-infrared (NIR) region (~ 700&#8722;900 nm), also known as the therapeutic window, where light has the maximum depth of penetration in tissue, typically up to 1 cm.16,17 In this range, biological chromophores such as hemoglobin, oxygenated hemoglobin, lipids, and water have little-to-no absorbance, which enables light to penetrate easily. When photothermal agents absorb light in this therapeutic window, the photoenergy is converted to photothermal energy.
Irvin and co-workers have previously reported alkoxy-substituted bis-EDOT benzene monomers that were synthesized using Negishi coupling.18 Negishi coupling is a preferred method for carbon-carbon bond formation. This process has many advantages, including the use of organozinc intermediates, which are less toxic and tend to have higher reactivity than other organometallics used.19,20 Organozinc compounds are also compatible with a wide range of functional groups on the organohalides.20 In the Negishi coupling reaction, an organohalide and organometal are coupled through the use of a palladium(0) catalyst.20 In the work presented herein, this cross coupling method is utilized in the synthesis of 1,4-dialkoxy-2,5-bis(3,4-ethylenedioxythienyl) benzene (BEDOT-B(OR)2) monomers. These monomers can then be easily polymerized electrochemically or chemically to yield polymers that are promising candidates for use in biomedical applications.
Conventional methods for preparation of colloidal polymeric suspensions in aqueous solutions for biomedical applications typically involve the dissolution of bulk polymers followed by nanoprecipitation or emulsion-solvent evaporation techniques.21,22 In order to produce NPs of poly(BEDOT-B(OR)2), a bottom-up approach is demonstrated here where the NPs are synthesized via in situ emulsion polymerization. Emulsion polymerization is a process that is easily scalable and is a relatively fast method for NP preparation.22 Studies using emulsion polymerization to produce NPs of other electroactive polymers have been reported for PPy and PEDOT.15,23,24 PEDOT NPs, for example, have been prepared using spray emulsion polymerization.24 This method is difficult to reproduce, and typically yields larger, micron-sized particles. The protocol described in this article explores the use of a drop-sonication method to reproducibly prepare 100-nm polymer NPs.
In this protocol, electroactive polymers tailored to absorb light in the NIR region similar to previously reported poly(BEDOT-B(OR)2) are synthesized and characterized to demonstrate their potential in electrochromic devices and as PTT agents. First, the protocol for the synthesis of the monomers via Negishi coupling is described. The monomers are characterized using NMR and UV-Vis-NIR spectroscopy. The preparation of NP colloid suspensions via oxidative emulsion polymerization in aqueous media is also described. The procedure is based on a two-step emulsion polymerization process previously described by Han et al. that is applied to the different monomers. A two-surfactant system is used to control the NP monodispersity. A cell viability assay is used to evaluate cytocompatibility of the NPs. Lastly, the potential of these NPs to act as PTT transducers is demonstrated by irradiation with a NIR laser.

<table border="0" cellpadding="0" cellspacing="0" width="747">
	<tbody>
		<tr height="42">
			<td height="42" style="height:42px;width:291px;">2 mm diameter platinum working electrode</td>
			<td style="width:171px;">CH Instruments</td>
			<td style="width:119px;">CH102</td>
			<td style="width:167px;">Polished using very fine sandpaper</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:291px;">3,4-ethylenedioxythiophene</td>
			<td>Sigma-Aldrich</td>
			<td style="width:119px;">483028</td>
			<td style="width:167px;">Purified by vacuum distillation</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:291px;">3-(4,5-Dimethylthiazol-2-yl)-2,5-Diphenyltetrazolium Bromide (MTT) 98%</td>
			<td>Alfa Aesar</td>
			<td style="width:119px;">L11939</td>
			<td style="width:167px;"></td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;">505 Sonic Dismembrator</td>
			<td>Fisher Scientific&#8482;&#160;</td>
			<td style="width:119px;">FB505110</td>
			<td style="width:167px;">1/8 &#8220; tip and rated at 500 watts</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:291px;">808 nm laser diode</td>
			<td>ThorLabs</td>
			<td style="width:119px;">L808P1WJ</td>
			<td style="width:167px;">Rated at 1 W</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:291px;">Acetonitrile anhydrous 99%</td>
			<td>Acros</td>
			<td style="width:119px;">61022-0010</td>
			<td style="width:167px;"></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:291px;">Avanti J-26 XPI</td>
			<td>Beckman Coulter</td>
			<td style="width:119px;">393127</td>
			<td style="width:167px;"></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:291px;">Bromohexane 98%</td>
			<td>MP Biomedicals</td>
			<td style="width:119px;">202323</td>
			<td style="width:167px;"></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:291px;">Dialysis (100,000) MWCO</td>
			<td>SpectrumLabs</td>
			<td style="width:119px;">G235071</td>
			<td style="width:167px;"></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:291px;">Dimethyl sulfoxide 99% (DMSO)</td>
			<td>BDH</td>
			<td style="width:119px;">BDH1115</td>
			<td style="width:167px;"></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:291px;">Dimethylformamide anhydrous (DMF) 99%</td>
			<td>Acros</td>
			<td style="width:119px;">326870010</td>
			<td style="width:167px;"></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:291px;">Dodecyl benzenesulfonate (DBSA)&#160;</td>
			<td>TCI</td>
			<td style="width:119px;">D0989</td>
			<td style="width:167px;"></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;">Dulbecco&#8217;s modified eagle medium (DMEM)&#160;</td>
			<td>Corning</td>
			<td style="width:119px;">10-013 CV</td>
			<td style="width:167px;"></td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;">EMS 150 TES sputter coater</td>
			<td style="width:171px;">Electron Microscopy Sciences</td>
			<td style="width:119px;"></td>
			<td style="width:167px;"></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:291px;">Ethanol (EtOH) 100%</td>
			<td>BDH</td>
			<td style="width:119px;">BDH1156</td>
			<td style="width:167px;"></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:291px;">ethyl 4-bromobutyrate (98%)</td>
			<td>Acros</td>
			<td style="width:119px;">173551000</td>
			<td style="width:167px;"></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:291px;">Ethyl acetate 99%</td>
			<td>Fisher</td>
			<td style="width:119px;">UN1173</td>
			<td style="width:167px;"></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;">Fetal bovine serum (FBS)</td>
			<td>Corning</td>
			<td style="width:119px;">35-010-CV</td>
			<td style="width:167px;"></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:291px;">Helios NanoLab 400</td>
			<td>FEI</td>
			<td style="width:119px;"></td>
			<td style="width:167px;"></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:291px;">Hexane</td>
			<td>Fisher</td>
			<td style="width:119px;">H306-4</td>
			<td style="width:167px;"></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:291px;">Hydrochloric acid (HCl)</td>
			<td>Fisher</td>
			<td style="width:119px;">A142-212</td>
			<td style="width:167px;"></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:291px;">Hydroquinone 99.5%</td>
			<td>Acros</td>
			<td style="width:119px;">120915000</td>
			<td style="width:167px;"></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:291px;">Hydrozine anhydrous 98%</td>
			<td>Sigma-Aldrich</td>
			<td style="width:119px;">215155</td>
			<td style="width:167px;"></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:291px;">Indium tin oxide (ITO) coated galss</td>
			<td>Delta Technologies</td>
			<td style="width:119px;">CG-41IN-CUV</td>
			<td style="width:167px;">4-8 &#937;/sq</td>
		</tr>
		<tr height="25">
			<td height="25" style="height:25px;width:291px;">Iron chloride 97% FeCl3</td>
			<td>Sigma-Aldrich</td>
			<td style="width:119px;">157740</td>
			<td style="width:167px;"></td>
		</tr>
		<tr height="25">
			<td height="25" style="height:25px;width:291px;">Magnesium sulfate (MgSO4)</td>
			<td>Fisher</td>
			<td style="width:119px;">593295</td>
			<td style="width:167px;">Dried at 100 oC</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:291px;">SKOV-3</td>
			<td>ATCC</td>
			<td style="width:119px;">HTB-26</td>
			<td style="width:167px;"></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:291px;">Methanol</td>
			<td>BDH</td>
			<td style="width:119px;">BHD1135</td>
			<td style="width:167px;"></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:291px;">n-Butlithium (2.5 M)&#160;</td>
			<td>Sigma-Aldrich</td>
			<td style="width:119px;">230707</td>
			<td style="width:167px;">Pyrophoric</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:291px;">Poly(styrenesulfonate-co-malic acid) (PSS-co-MA) 20,000 MW</td>
			<td>Sigma-Aldrich</td>
			<td style="width:119px;">434566</td>
			<td style="width:167px;"></td>
		</tr>
		<tr height="25">
			<td height="25" style="height:25px;width:291px;">Potassium carbonate</td>
			<td>Sigma-Aldrich</td>
			<td style="width:119px;">209619</td>
			<td style="width:167px;">Dried at 100 oC</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:291px;">Potassium hydroxide</td>
			<td>Alfa Aesar</td>
			<td style="width:119px;">A18854</td>
			<td style="width:167px;"></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:291px;">Potassium iodide</td>
			<td>Fisher</td>
			<td style="width:119px;">P410-100</td>
			<td style="width:167px;"></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:291px;">RO-5 stirplate</td>
			<td>IKA-Werke</td>
			<td style="width:119px;"></td>
			<td style="width:167px;"></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:291px;">SC4000 IR camera</td>
			<td>FLIR</td>
			<td style="width:119px;"></td>
			<td style="width:167px;"></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:291px;">Synergy H4 Hybrid Reader</td>
			<td>Biotek</td>
			<td style="width:119px;"></td>
			<td style="width:167px;"></td>
		</tr>
		<tr height="63">
			<td height="63" style="height:63px;width:291px;">Tetrabutylammonium perchlorate (TBAP) 99%</td>
			<td>Sigma-Aldrich</td>
			<td style="width:119px;">3579274</td>
			<td style="width:167px;">Purified by recrystallization in ethyl acetate</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:291px;">Tetrahydrofuran anhydrous (THF) 99%</td>
			<td>Sigma-Aldrich</td>
			<td style="width:119px;">401757</td>
			<td style="width:167px;"></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:291px;">tetrakis(triphenylphosphine) 
			palladium(0)</td>
			<td>Sigma-Aldrich</td>
			<td style="width:119px;">216666</td>
			<td style="width:167px;">Moisture sensitive</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:291px;">Thermomixer</td>
			<td>Eppendorf</td>
			<td style="width:119px;"></td>
			<td style="width:167px;"></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:291px;">USB potentiostat/galvanostat</td>
			<td>WaveNow</td>
			<td style="width:119px;">AFTP1</td>
			<td style="width:167px;"></td>
		</tr>
		<tr height="25">
			<td height="25" style="height:25px;width:291px;">Zetasizer Nano Zs</td>
			<td>Malvern</td>
			<td style="width:119px;"></td>
			<td style="width:167px;">Optical Arrangment 175o</td>
		</tr>
		<tr height="25">
			<td height="25" style="height:25px;width:291px;">Zinc chloride (1 M) ZnCl2</td>
			<td>Acros</td>
			<td style="width:119px;">370057000</td>
			<td style="width:167px;"></td>
		</tr>
	</tbody>
</table>

electroactive polymer nanoparticles exhibiting photothermal properties

A method for the synthesis of electroactive polymers is demonstrated, starting with the synthesis of extended conjugation monomers using a three-step process that finishes with Negishi coupling. Negishi coupling is a cross-coupling process in which a chemical precursor is first lithiated, followed by transmetallation with ZnCl2. The resultant organozinc compound can be coupled to a dibrominated aromatic precursor to give the conjugated monomer. Polymer films can be prepared via electropolymerization of the monomer and characterized using cyclic voltammetry and ultraviolet-visible-near infrared (UV-Vis-NIR) spectroscopy. Nanoparticles (NPs) are prepared via emulsion polymerization of the monomer using a two-surfactant system to yield an aqueous dispersion of the polymer NPs. The NPs are characterized using dynamic light scattering, electron microscopy, and UV-Vis-NIR-spectroscopy. Cytocompatibility of NPs is investigated using the cell viability assay. Finally, the NP suspensions are irradiated with a NIR laser to determine their effectiveness as potential materials for photothermal therapy (PTT).

The reaction protocol yielding M1 and M2 is shown in Figure 1. The monomers can be characterized by 1H and 13C NMR spectroscopy, melting point, and elemental analysis. The 1H NMR spectrum provides information regarding the connectivity of atoms and their electronic environments; thus, it is routinely used to verify that reactions have been completed successfully. Negishi coupling reactions involve coupling of the phenyl ring to the EDOT, c...

Watch this Scientific Journal Video about Electroactive Polymer Nanoparticles Exhibiting Photothermal Properties at JoVE.com

Electroactive Polymer Nanoparticles Exhibiting Photothermal Properties

A protocol is presented for the synthesis and preparation of nanoparticles consisting of electroactive polymers.

A method for the synthesis of electroactive polymers is demonstrated, starting with the synthesis of extended conjugation monomers using a three-step ...

The overall goal of this protocol is to prepare conductive polymer nanoparticles that exhibit photothermal properties, and evaluate their cytotoxicity. Conductive polymer nanoparticles are ideal agents for photothermal therapy because they absorb light in the near infrared range and convert it to heat to kill cancer cells. The main advantage of polymeric phototherapy agents is that they can be tailored to tune their absorption properties by a compatibility and tumor targeting ability to enable effective non-invasive localized cancer therapy.The polymers we are using for photothermal therapy can also be used for alternative energy applications, sensors and electrochromics. Individuals new to this method may struggle because the reaction is sensitive to moisture. A good understanding of airless synthesis techniques is essential.Visual demonstration of cell culture assays is critical as sterile techniques are difficult to master. All multi-role play assays require accuracy and consistency to achieve proper results. To a three-neck, round-bottom flask secure a septum, a condenser fitted with an inlet control adapter, and a gas outlet control adapter.Connect the gas outlet adapter to a bubbler. Next, connect the inlet adapter to an argon Shlenk line with thick-walled PVC tubing. Begin the flow of argon into the reaction flask, and let the gas flow for several minutes.After turning on the vacuum, use a Bunsen burner to flame dry the reaction, and then purge the apparatus with argon. Repeat this twice more to achieve an airless environment. Use a syringe to add one point zero seven grams of EDOT to the apparatus through the septum.Add 20 milliliters of Tetrahydrofuran into the flask and stir. Prepare a dry ice acetone bath in a Low-form Dewar flask, and chill the EDOT flask for 15 minutes at minus 78 degrees Celsius. Then drop wise at 11 millimoles of n-butyllithium in hexanes while maintaining a temperature of minus 78 degrees Celsius.After complete addition, stir for an additional hour. Extreme caution must be taken when handling organolithium reagents. These solutions are exceptionally hazardous, and should only be handled by someone who has been extensively trained in their use.Remove the dry ice acetone bath. And, immediately begin a drop wise addition of 14 point 13 milliliters of a one Molar Zinc Chloride solution, stirring for one hour at room temperature. Next, add four millimoles of one four Dialkoxy two five Dibromobenzene, and 80 micromoles of palladium tetrakis triphenylphosphine to the reaction.Begin re-fluxing the reaction at 75 degrees Celsius with an oil bath. Each day, use a syringe to take a small sample of the reaction mixture. Precipitate the sample into two milliliters of one Molar hydrochloric acid, and use two milliliters of dichloromethane to extract the material.Spot the extract on a silica thin layer chromatography, or TLC plate, alongside pre-made solutions of purified EDOT and the corresponding one four Dialkoxy two five Dibromobenzene. Use a 60 to 40 solution of ethyl acetate and hexanes to develop the plate in a glass chamber. Once the reaction is complete, in three to five days, cool the reaction to room temperature.Add 10 milliliters of one Molar hydrochloric acid followed by 20 milliliters of dichloromethane to quench the reaction. Transfer the reaction work-up to a separatory funnel, and isolate the organic layer. Wash the organics with deionized water until the water washes are no longer acidic.Next, dry the organics over 15 grams of magnesium sulfate. After filtering off the solid, remove the solvent using a rotary evaporator to yield a yellow orange solid. In a glass vile, prepare one milliliter of two percent weight by volume PSS-co-MA in water, and add a small stir bar.Prepare a 16 milligram per milliliter solution of monomer in chloroform and transfer 100 microliters of it into a microcentrifuged tube. Dissolve 30 milligrams of dodecylbenzene sulfonic acid in the microcentrifuge tube, and then use an automatic vortex mixer for 30 to 60 minutes to homogenize the solution. Next, add the homogenized organic phase in 10 microliter aliquot to the two percent PSS-co-MA solution every 60 seconds.After complete addition, dilute the solution with two milliliters of water and remove the stir bar. Place the emulsion in an ice bath, and then use a probe to sonicate emlusion with two 10 second intervals at an amplitude of 30 percent. Remove the vial from the ice bath, and replace the stir bar to continue mixing the emulsion.Next, add three point eight microliters of a one hundred milligrams per milliliter aqueous solution of iron chloride to the monomer emulsion, and stir for one hour to yield polymer nanoparticles stabilized with PSS-co-MA. Transfer the nanoparticles suspension into a seven milliliter centrifuge tubes, and centrifuge the suspension at 75, 600 times G for three minutes. Finally, recover the supernatant, and dialyze in water for 24 hours using 100 kilodalton molecular weight cut-off dialysis tubing.Culture SCOV three ovarian cancer cells in DMEMs supplemented with 10 percent fetal bovine serum at 37 degrees Celsius and five percent carbon dioxide in T 75 flasks. After dissociating and counting cells using standard protocols, feed cells at a density of 5, 000 cells per well in a 96 well plate. Incubate the cells for 24 hours at 37 degrees Celsius and five percent carbon dioxide.Immediately before use, delude the nanoparticles suspension into full growth medium at a concentration of one milligram per milliliter. Filter the nanoparticles suspension through a sterile zero point two micrometer filter. Then dilute the suspension to the desired exposure concentrations with full growth medium supplemented with one percent penicillin streptomycin.Gently remove the medium from each well and replace with 100 microliters of the nanoparticles suspension at various exposure concentrations. After incubating the cells, carefully remove the solution, and then replace the medium with 100 microliters of sterile filtered zero point five milligrams per milliliter MTT solution. Incubate the cells for two to four hours in the incubator.Then examine the cells under a microscope to check for formation of Formazan crystals. Carefully remove the MTT solution and replace it with 100 microliters of dimethyl sulfoxide. Place the plate on a shaker and mix for several minutes.Finally, measure the absorbents of each well at 590 nanometers and 700 nanometers. These values correspond to the peak absorbents of Formazan product and a baseline respectively. The resulting monomers can be characterized by hydrogen and carbon 13 NMR spectroscopy.Negishi coupling reactions attach the phenyl ring to the EDOT causing the phenyl proton peak to shift from seven point one PPM to seven point eight PPM. The theyenel proton also shifts up field to six point five PPM. The four protons on the ethylenedioxy bridge carbons split into two sets of multiplets at four point three PPM.The carbon 13 NMR spectrum exhibits peaks at one 70, one 45, one 40 and one 13 for the thyenel carbons, and one 50, one 20, and one 12 for the phenylene carbons. The cital compatibility of polymer nanoparticles is determined using an MTT cell viability assay. Within the nanaparticle concentration range of zero point two three to 56 micrograms per milliliter, then nanoparticles do not decrease cell viability to less than 90 percent of the control.Typically a reduction in cell viability of less than 20 percent is consisdered acceptable. Once mastered, it takes about a week to synthesize the Monomer, another week to purify it, and less than a day to prepare and purify the nanoparticles. The citotoxicity study can be completed in two and a half days from cell seeding to the conclusion of the assay.While attempting in vitro cell studies, it is critical to follow proper aseptic techniques. Additional studies such as live dead assays, microscopy studies, and in vivo biodistribution, and photothermal ovulation studies can be performed with the nanoparticles prepared through these protocols to better understand their potential as photothermal agents for cancer therapy.

electroactive-polymer-nanoparticles-exhibiting-photothermal-properties

Research

JoVE Journal

Engineering

13.7K visualizações.  Texas State University. The overall goal of this protocol is to prepare conductive polymer nanoparticles that exhibit photothermal properties, and evaluate their cytotoxicity. Conductive polymer nanoparticles are ideal agents for photothermal therapy because they absorb light in the near infrared range and convert it to heat to kill cancer cells. The main advantage of polymeric phototherapy agents is that they can be tailored to tune their absorption properties by a compatibility and tumor targeting ability to enabl...