A subscription to JoVE is required to view this content. Sign in or start your free trial.
We describe a reproducible, automated, and unbiased imaging system for characterizing neuromuscular junction function using human engineered skeletal muscle tissue and optogenetic motoneurons. This system allows for the functional quantification of neuromuscular connectivity over time and detects diminished neuromuscular function caused by neurotoxins and myasthenia gravis patient serum.
Many neuromuscular diseases, such as myasthenia gravis (MG), are associated with dysfunction of the neuromuscular junction (NMJ), which is difficult to characterize in animal models due to physiological differences between animals and humans. Tissue engineering offers opportunities to provide in vitro models of functional human NMJs that can be used to diagnose and investigate NMJ pathologies and test potential therapeutics. By incorporating optogenetic proteins into induced pluripotent stem cells (iPSCs), we generated neurons that can be stimulated with specific wavelengths of light. If the NMJ is healthy and functional, a neurochemical signal from the motoneuron results in muscle contraction. Through the integration of optogenetics and microfabrication with tissue engineering, we established an unbiased and automated methodology for characterizing NMJ function using video analysis. A standardized protocol was developed for NMJ formation, optical stimulation with simultaneous video recording, and video analysis of tissue contractility. Stimulation of optogenetic motoneurons by light to induce skeletal muscle contractions recapitulates human NMJ physiology and allows for repeated functional measurements of NMJ over time and in response to various inputs. We demonstrate this platform's ability to show functional improvements in neuromuscular connectivity over time and characterize the damaging effects of patient MG antibodies or neurotoxins on NMJ function.
The neuromuscular junction (NMJ) is the chemical synapse between motoneurons (MNs) and skeletal muscle cells (SkM) that allows for muscle contraction. Toxins, such as neurotoxin α-bungarotoxin (BTX), or neuromuscular diseases (NMD) like myasthenia gravis (MG) can lead to degeneration of the NMJ and reductions in muscle control1. Bioengineered human tissue models better recapitulate the functional and physiological mechanisms of human NMJs and offer greater translational potential than animal models.
While animal models have advanced the understanding of the formation and function of the NMJ....
All cell lines for this work were created and used in compliance with the institutional guidelines of Columbia University, NY, USA.
1. Bioreactor preparation
Neuromuscular junctions were generated by co-culturing optogenetic hiPSC-derived motoneurons with non-optogenetic skeletal muscle tissue. Human primary skeletal myoblasts (SkM) were seeded into the platforms and differentiated into multinucleated myotubes using the 2-week protocol. The optogenetic motoneurons were differentiated separately, but in parallel with the myotube differentiation, and then seeded into the platform (Figure 1). The tissues began contracting in response to blue light s.......
This system is an engineered 3D human tissue model that combines optogenetics and video processing to enable automated and unbiased evaluation of NMJ function. Using a standardized protocol, we have demonstrated the ability to measure changes in NMJ function during physiological development and characterize the damaging effects of pathologies such as neurotoxin exposure and myasthenia gravis patient sera.
Previous studies have reported the ability to model MG with optogenetic hPSC-derived moto.......
We gratefully acknowledge funding support by the NIH [grant numbers EB025765 and EB027062], DOD [award number W81XWH-18-1-0095], and the UCSF Health Innovation via Engineering (HIVE Fellowship). We gratefully acknowledge the Columbia University Stem Cell Core for their help and guidance with cell reprogramming.
....Name | Company | Catalog Number | Comments |
Cells | |||
SkMDC | Cook Myosite | P01059-14M | |
Media and Supplements | |||
Advanced DMEM/F12 | ThermoFisher Scientific | 12634-020 | |
Bovine Serum Albumin solution | Millipore Sigma | A9576-50ML | |
G-5 Supplement (100X) | ThermoFisher Scientific | 17503-012 | |
Geneticin Selective Antibiotic (G418 Sulfate) (50 mg/mL) | ThermoFisher Scientific | 10131-035 | |
Insulin, Recombinant Human | Millipore Sigma | 91077C-100MG | |
Matrigel | Corning | 354277 | |
mTeSR Plus | Stem Cell Technologies | 100-0276 | |
MyoTonic Growth Media Kit | Cook Myosite | MK-4444 | |
N-2 Supplement | ThermoFisher Scientific | 17502-048 | |
NBactiv4 500 mL | BrainBits LLC | Nb4-500 | |
Neurobasal Medium | ThermoFisher Scientific | 21103-049 | |
Neurobasal-A Medium | ThermoFisher Scientific | A13710-01 | |
Pluronic F-127 | Sigma Aldrich | P2443 | |
ReLeSR | Stem Cell Technologies | 5872 | |
Plasticware | |||
30 mm cage cube system | ThorLabs | CM1-DCH, CP33, ER1-P4 and ER2-P4 | |
37 µm Reversible Strainer, large | Stem Cell Technologies | 27250 | |
546 nm short-pass excitation filter | Semrock | FF01-546/SP-25 | |
573 nm dichroic mirror | Semrock | FF573-Di01–25x36 | |
594 nm long- pass emission filter | Semrock | BLP01-594R-25 | |
594 nm long-pass excitation filter | Semrock | BLP01-594R-25 | |
Blue (470nm) Rebel LED on a SinkPAD-II 10mm Square Base - 65 lm @ 700mA | LuxeonStarLEDs | SP-05-B4 | |
Carclo 29.8° Frosted 10 mm Circular Beam Optic - Integrated Legs | LuxeonStarLEDs | 10413 | |
Corning 60 mm Ultra-Low Attachment Culture Dish | Corning | 3261 | |
Heat sink | LuxeonStarLEDs | LPD-19-10B | |
Optics | |||
pluriStrainer 400 µm, 25 pack, sterile | PluriSelect | 43-50400-03 | |
pluriStrainer 500 µm, 25 pack, sterile | PluriSelect | 43-50500-03 | |
Red (627nm) Rebel LED on a SinkPAD-II 10mm Square Base - 65 lm @ 700mA | LuxeonStarLEDs | SP-05-R5 | |
ring-actuated iris diaphragm | ThorLabs | SM1D12D | |
T-Cube LED drivers | ThorLabs | LEDD1B, KPS101 | |
Molds | |||
Female Threaded Hex Standoffs, 3 1/2" 10-32, Partially Threaded 1/2" | McMaster | 91920A046 | |
Low-Profile C-Clamp | McMaster | 1705A12 | |
Growth Factors | |||
Adenosine 3′,5′-cyclic monophosphate | Millipore Sigma | A9501-1G | |
CHIR 99021, 10 mg | Tocris | 4423/10 | |
DAPT 10 mg | R&D Systems | 2634/10 | |
Human CNTF, research grade, 5 µg | Miltenyl Biotec | 130-096-336 | |
Human Vitronectin Protein, CF | R&D Systems | 2349-VN-100 | |
Human Vitronectin Protein, CF | R&D Systems | 2349-VN-100 | |
IGF1 Recombinant Human Protein | ThermoFisher Scientific | PHG0078 | |
Laminin mouse protein, natural | ThermoFisher Scientific | 23017015 | |
Recombinant Human Agrin Protein | R&D Systems | 6624-AG-050 | |
Recombinant Human GDNF Protein, CF 50ug | R&D Systems | 212-GD-050/CF | |
Recombinant Human Neurotrophin 3Â 100 ug | Cell Sciences | CRN500D | |
Recombinant Human Neurotrophin-4 | Cell Sciences | CRN501B | |
Recombinant Human Sonic Hedgehog/Shh (C24II) N-Terminus | R&D Systems | 1845-SH-100 | |
Recombinant Human/Murine/Rat BDNF 50 ug | Peprotech | 450-02 | |
Retinoic Acid, 50 mg | Millipore Sigma | R2625-50 | |
SAG Smoothened Agonist | Millipore Sigma | 566660 | |
SB431542 10 mg | Stem Cell Technologies | 72234 | |
StemMACS LDN-193189 | Miltenyl Biotec | 130-103-925 | |
Vitronectin from human plasma | Millipore Sigma | V8379-50UG | |
Y-27632 dihydrochloride | Tocris | 1254 | |
Antibodies | |||
α-actinin mAb (Mouse IgG1) | Abcam | ab9465 | |
Choline Acetyltransferase (ChAT) (Goat) | Millipore | AB144P | |
Desmin mAb (Mouse IgG1) | Dako | M076029-2 | |
Myosin Heavy Chain (MHC) (Mouse IgG2b) | DSHB | MF20 | |
Equipment | |||
Arduino Uno R3 | Arduino | A000066 | |
Automated stage | Applied scientific instrumentation | MS- 2000 XYZ | |
Expanded plasma cleaner | Harrick Plasma | PDC-001Â (115V) | |
Invitrogen Countess Automated Cell Counter | Marshal Scientific | I-CACC | |
IX-81 Inverted fluorescence microscope | Olympus | IX-ILL100LH | |
Series Stage Top Incubator System | Tokai Hit STX | TOKAI-HIT-STXG | |
Zyla 4.2 sCOMS Camera | Andor Technology | ZYLA-4.2P-CL10 | |
Software | |||
Arduino Software (IDE) | Arduino | IDE 1.8.19 | |
Mastercam | Mastercam | Mastercam for Solidworks | |
Matlab | Matlab | R2021b | |
NIS elements | Nikon | Basic Research | |
Solidworks 3D CAD | Solidworks | Solidworks Standard |
This article has been published
Video Coming Soon
ABOUT JoVE
Copyright © 2024 MyJoVE Corporation. All rights reserved