VJ et HS reconnaissent le soutien du NIH R01 GM094246 à VJ. HS reconnaît les fonds de démarrage du programme d&#39;enquête créative de l&#39;Université de Clemson et du Centre de technologie des sciences et d&#39;ingénierie des matériaux optiques à l&#39;Université Clemson. Ce projet a également été soutenu par une bourse de formation du Keck Center for Interdisciplinary Bioscience Training du Gulf Coast Consortia (NIGMS Grant No. 1 T32GM089657-05) et la Fondation Schissler pour les études translationnelles des maladies humaines communes à DD. Le contenu relève uniquement de la responsabilité des auteurs et ne représente pas nécessairement les vues officielles des instituts nationaux de la santé.

Tous les auteurs déclarent qu&#39;ils n&#39;ont pas d&#39;intérêts financiers concurrents avec le contenu de cet article.

Dans ce travail, le protocole d&#39;alignement, d&#39;étalonnage et de mesure des distances interdyeuses avec une grande précision en utilisant des expériences FRET à une seule molécule PIE-MFD est présenté. En calibrant soigneusement tous les paramètres instrumentaux, on peut augmenter la précision des distances mesurées et atteindre la précision d&#39;Angstrom. Pour ce faire, divers histogrammes multidimensionnels sont utilisés pour analyser et identifier les populations pour une caractérisation plus pous...

Un objectif fondamental des études de biologie structurale est de démêler la relation entre la structure et la fonction des machines biomoléculaires. La première impression visuelle de biomolécules ( p. Ex., Protéines et acides nucléiques) s&#39;est produite dans les années 1950 à travers le développement de la cristallographie aux rayons X 1 , 2 . La cristallographie aux rayons X fournit des informations structurales statiques à haute résolution contraintes par l&#39;emballage en cristal. Par conséquent, l&#39;immobilité inhérente des modèles structurels aux rayons X évite la nature dynamique des biomolécules, un facteur qui affecte la plupart des fonctions biologiques 3 , 4 , 5 . La résonance magnétique nucléaire (RMN) 6 , 7 , 8 a fourni une solution alternative au problème en résolvant des modèles structurels dans des solutions aqueuses. Un grand avantageDe la RMN est sa capacité à retrouver la nature dynamique intrinsèque des biomolécules et des ensembles conformationnels, ce qui aide à clarifier les relations intrinsèques entre structure, dynamique et fonction 3 , 4 , 5 . Néanmoins, la RMN, limitée par la taille de l&#39;échantillon et de grandes quantités d&#39;échantillons, nécessite des stratégies complexes d&#39;étiquetage pour les grands systèmes. Par conséquent, il est urgent de développer des méthodes alternatives dans la biologie structurale. Historiquement, le transfert d&#39;énergie de résonance de Förster (FRET) 9 n&#39;a pas joué un rôle important dans la biologie structurale en raison de l&#39;idée fausse selon laquelle FRET fournit des mesures de distance à faible précision. C&#39;est le but de ce protocole de revoir la capacité de FRET à déterminer les distances à l&#39;échelle nanométrique, de sorte que ces distances peuvent être utilisées pour la construction de modèles structurels de biomolécules. La première vérification expérimentaleLa dépendance à la R - 6 de l &#39; efficacité de FRET a été effectuée par Stryer en 1967 10 en mesurant des polyprolines de différentes longueurs comme une «règle spectroscopique». Une expérience similaire a été réalisée au niveau de la seule molécule en 2005 11 . Les molécules de polyproline se sont avérées non idéales et, par conséquent, les molécules d&#39;ADN double brin ont été utilisées plus tard 12 . Cela a ouvert la fenêtre pour des mesures de distance précises et l&#39;idée d&#39;utiliser FRET pour identifier les propriétés structurelles des biomolécules. FRET est optimal lorsque la distance de distance interdye est de ~ 0.6-1.3 R 0 , où R 0 est la distance de Förster. Pour les fluorophores typiques utilisés dans des expériences FRET à une seule molécule, R 0 est de ~ 50 Å. Généralement, FRET offre de nombreux avantages par rapport à d&#39;autres méthodes dans sa capacité à résoudre et à différencier les structures et la dynamique dansSystèmes hétérogènes: (i) En raison de la sensibilité ultime de la fluorescence, les expériences 1 , 14 , 15 , 16 de FRET à une molécule 13 , 14 , peuvent résoudre des ensembles hétérogènes en comptant directement et en caractérisant simultanément les structures de leurs membres individuels. (Ii) Les voies de réaction complexes peuvent être directement déchiffrées dans les études FRET à une seule molécule car aucune synchronisation d&#39;un ensemble n&#39;est nécessaire. (Iii) FRET peut accéder à une large gamme de domaines temporels qui s&#39;étend sur 10 décennies dans le temps, couvrant une grande variété de la dynamique biologiquement pertinente. (Iv) Les expériences de FRET peuvent être effectuées dans toutes les conditions de solution, in vitro aussi bien qu&#39;in vivo . La combinaison de FRET avec microscopie à fluorescence permet d&#39;étudier les structures moléculaires et les interactions directement dans les cellules vivantes 15 , 16 , </<html> Sup&gt; 17 , 18 , 19 , même avec une haute précision 20 . (V) FRET peut être appliqué à des systèmes de presque n&#39;importe quelle taille ( par exemple, les oligomères de polyproline 21 , 22 , 23 , 24 , Hsp90 25 , la transcriptase inverse du VIH 26 et les ribosomes 27 ). (Vi) Enfin, un réseau de distances qui contient toute la dimension des biomolécules pourrait être utilisé pour dériver des modèles structurels de molécules statiques ou dynamiques 18 , 28 , 29 , 30 , 31 , 32 , 33 , 34 ,Ref &quot;&gt; 35 , 36 , 37 . Par conséquent, la spectroscopie FRET à une seule molécule peut être utilisée pour dériver des distances suffisamment précises pour être utilisées pour la modélisation structurelle à distance 26 . Ceci est possible en profitant de la détection de fluorescence multiparamètre (MFD) 28 , 38 , 39 , 40 , 41 , 42 , qui utilise huit dimensions de l&#39;information de fluorescence ( c&#39;est-à-dire le spectre d&#39;excitation, le spectre de fluorescence, l&#39;anisotropie, la durée de vie de la fluorescence, le rendement quantique de fluorescence, Le temps macroscopique, les intensités de fluorescence et la distance entre les fluorophores) pour réparer de manière précise et précise les contraintes de distance. En outre, l&#39;excitation entrelacée pulsée (PIE) est combinée avec MFD(PIE-MFD) 42 pour surveiller la fluorescence de l&#39;accepteur d&#39;excitation directe et pour sélectionner les événements d&#39;une seule molécule découlant d&#39;échantillons contenant une stoechiométrie donateur-accepteur 1: 1. Une configuration typique de PIE-MFD utilise des lasers d&#39;excitation entrelacés à deux impulsions connectés à un corps de microscope confocal, où la détection de photons est divisée en quatre canaux différents dans différentes fenêtres spectrales et caractéristiques de polarisation. Vous trouverez plus de détails dans la Figure 1 . Il est important de noter que FRET doit être combiné avec des méthodes de calcul pour obtenir des modèles structurels atomiques compatibles avec les résultats FRET 26 , 30 . Ce n&#39;est pas l&#39;objectif du protocole actuel de passer en revue la méthodologie associée pour construire des modèles structurels avec des distances dérivées de FRET. Cependant, ces approches ont été appliquées en combinaison avec d&#39;autres techniques ( p. Ex., La dispersion des rayons X à angle petitOu la résonance paramagnétique électronique), donnant naissance au domaine de la biologie structurale intégrative 43 , 44 , 45 , 46 . L&#39;objectif actuel est d&#39;ouvrir la voie à FRET en tant qu&#39;outil quantitatif en biologie structurale. À titre d&#39;exemple, cette méthodologie a été utilisée pour identifier trois états conformationnels dans le domaine de liaison au ligand (LBD) du récepteur N-méthyl-D-aspartate (NMDA). Le but ultime est de surmonter les limitations précitées et d&#39;introduire FRET parmi les méthodes d&#39;intégration utilisées pour la détermination structurale des biomolécules en fournissant des distances mesurées avec une haute précision.

<table border="0" cellpadding="0" cellspacing="0" width="672">
	<tbody>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">charcoal</td>
			<td style="width:183px;">Merck KGaA</td>
			<td style="width:119px;">K42964486 320</td>
			<td style="width:167px;"></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">syringe filter</td>
			<td style="width:183px;">Fisherbrand</td>
			<td style="width:119px;">09-719C</td>
			<td>size: 0.20um</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">chambered coverglass</td>
			<td style="width:183px;">Fisher Scientific</td>
			<td align="right" style="width:119px;">155409</td>
			<td>1.5 borosilicate glass, 8 wells</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">microscope cover glass</td>
			<td style="width:183px;">Fisher Scientific</td>
			<td style="width:119px;">063014-9</td>
			<td>size: 24X60-1.5</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">Nuclease free water</td>
			<td style="width:183px;">Fisher Scientific</td>
			<td style="width:119px;">148859</td>
			<td>nuclease free</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">tween-20</td>
			<td style="width:183px;">Thermo Scientific</td>
			<td style="width:119px;">28320</td>
			<td>10% solution of Polysorbate 20</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:204px;">acceptor DNA strand (High FRET)</td>
			<td style="width:183px;">Integrated DNA Technologies</td>
			<td style="width:119px;">178124895</td>
			<td>5&#180;-d(CGG CCT ATT TCG GAG TTG TAA ACA GAG AT(Cy5)C GCC TTA AAC GTT CGC CTA GAC TAG TCC AAG TAT TGC)</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:204px;">acceptor DNA strand (Low FRET)</td>
			<td style="width:183px;">Integrated DNA Technologies</td>
			<td style="width:119px;">177956424</td>
			<td>5&#180;-d(CGG CCT ATT TCG GAG TTG TAA ACA GAG ATC GCC TT(Cy5)A AAC GTT CGC CTA GAC TAG TCC AAG TAT TGC)</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:204px;">donor DNA strand</td>
			<td style="width:183px;">Integrated DNA Technologies</td>
			<td style="width:119px;">177951437</td>
			<td>5&#180; -d(GCA ATA CTT GGA CTA GTC TAG GCG AAC GTT TAA GGC GAT CTC TGT TT(Alexa488)A CAA CTC CGA AAT AGG CCG)</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:204px;">DNA strand (No FRET)</td>
			<td style="width:183px;">Integrated DNA Technologies</td>
			<td style="width:119px;"></td>
			<td>5&#180; -d(CGG CCT ATT TCG GAG TTG TAA ACA GAG ATC GCC TTA AAC GTT CGC CTA GAC TAG TCC AAG TAT TGC)</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">thermal cycler</td>
			<td style="width:183px;">Eppendorf</td>
			<td style="width:119px;">E6331000025</td>
			<td>nexus gradient</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:204px;">Alexa Fluor 488 C5&#160;Maleimide</td>
			<td style="width:183px;">Thermo Scientific</td>
			<td style="width:119px;">A10254</td>
			<td>termed cyan-green fluorophore in the manuscript</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:204px;">Alexa Fluor 647 C2&#160;Maleimide</td>
			<td style="width:183px;">Thermo Scientific</td>
			<td style="width:119px;">A20347</td>
			<td>termed far-red fluorophore in the manuscript</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">Rhodamine 110</td>
			<td style="width:183px;">Sigma-Aldrich</td>
			<td style="width:119px;">83695-250MG</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">Rhodamine 101</td>
			<td style="width:183px;">Sigma-Aldrich</td>
			<td style="width:119px;">83694-500MG</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">LB Broth, Miller</td>
			<td style="width:183px;">Fisher Scientific</td>
			<td style="width:119px;">BP1426</td>
			<td>For culture of E. coli</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">Ampicillin</td>
			<td style="width:183px;">Sigma-Aldrich</td>
			<td style="width:119px;">A0166</td>
			<td>Used at 100 ug/ml final concentration in selective LB medium to maintain plasmid selection</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">Tetracyline&#160;</td>
			<td style="width:183px;">Calbiochem</td>
			<td style="width:119px;">58346</td>
			<td>Used at 12.5 ug/ml final concentration in selective LB medium to maintain gor (flutathione reductase) mutation in Origami B(DE3) strains to facilitate disulfide bond oxidation</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">Kanamycin</td>
			<td style="width:183px;">Fisher Scientific</td>
			<td style="width:119px;">BP906-5</td>
			<td>Used at 15 ug/ml final concentration in selective LB medium to maintain trxB (rhioredoxin reductase) mutation in B(DE3) stains to facilitate disulfide bond oxidation</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:204px;">Origami B(DE3) Competent Cells</td>
			<td style="width:183px;">Millipore</td>
			<td style="width:119px;">70837-3</td>
			<td>Competent E. coli cells for expression of protein with disulfide bridges</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:204px;">Isopropyl-&#946;-D-thiogalactopyranoside (IPTG)</td>
			<td style="width:183px;">Fisher Scientific</td>
			<td style="width:119px;">BP1755</td>
			<td>For induction of E. coli protein expression</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">HiTrap Chelating HP</td>
			<td style="width:183px;">GE Life Sciences</td>
			<td style="width:119px;">17-0409-01</td>
			<td>For Large-scale FPLC Purification of His-tagged protein</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">Imidazole</td>
			<td style="width:183px;">Sigma-Aldrich</td>
			<td align="right" style="width:119px;">56749</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">Ni-NTA Agarose&#160;</td>
			<td style="width:183px;">Qiagen</td>
			<td align="right" style="width:119px;">30210</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">PD-10 Desalting Column</td>
			<td style="width:183px;">GE Life Sciences</td>
			<td style="width:119px;">17-0851-01</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">AktaPurifier</td>
			<td style="width:183px;">GE Life Sciences</td>
			<td align="right" style="width:119px;">28406264</td>
			<td>FPLC Instrument</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">Dialysis tubing</td>
			<td style="width:183px;">Spectrum labs</td>
			<td style="width:119px;">132562</td>
			<td>15 kD MWCO 24 mm Flath width, 10 meters/roll</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:204px;">Dichroics</td>
			<td style="width:183px;">Semrock</td>
			<td style="width:119px;">FF500/646-Di01-25x36</td>
			<td>500/646 BrightLight</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">50/50 Beam splitter polarizer</td>
			<td style="width:183px;">Qioptiq Linos&#160;</td>
			<td style="width:119px;">G33 5743 000</td>
			<td>10x10 film polarizer</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:204px;">Green pass filer</td>
			<td style="width:183px;">Chroma</td>
			<td style="width:119px;">ET525/50m</td>
			<td style="width:167px;">ET525/50m 25 mm diameter mount</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">Red pass filter</td>
			<td style="width:183px;">Chroma</td>
			<td>ET720/150m</td>
			<td>ET720/150m 25 mm diameter mount</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">Power Meter</td>
			<td style="width:183px;">ThorLabd</td>
			<td style="width:119px;">PM200</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">UV-Vis spectrophotometer</td>
			<td style="width:183px;">Varian</td>
			<td style="width:119px;">Cary300Bio</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">Fluorolog 3 fluorometer</td>
			<td style="width:183px;">Horiba</td>
			<td style="width:119px;">FL3-22-R3</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">Fluorohub TCSPC controller</td>
			<td style="width:183px;">Horiba</td>
			<td style="width:119px;">Fluorohub-B</td>
			<td>TCSPC electronics for ensemble measurements</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">NanoLed 485L</td>
			<td style="width:183px;">Horiba</td>
			<td style="width:119px;">485L</td>
			<td>Blue diode laser</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">NanoLed 635L</td>
			<td style="width:183px;">Horiba</td>
			<td style="width:119px;">635L</td>
			<td>Red diode laser</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">Olympus IX73 Microscope</td>
			<td style="width:183px;">Olympus</td>
			<td style="width:119px;">IX73P2F</td>
			<td>Microscope frame</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">PMA 40 Hybrid Detector</td>
			<td style="width:183px;">PicoQuant GmbH</td>
			<td style="width:119px;">932200, PMA 40</td>
			<td>Optimized for green detection</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">PMA 50 Hybrid Detector</td>
			<td style="width:183px;">PicoQuant GmbH</td>
			<td style="width:119px;">932201, PMA 50</td>
			<td>Optimized for ed shifter sensitivity</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">485nm laser</td>
			<td style="width:183px;">PicoQuant GmbH</td>
			<td style="width:119px;">LDH-D-C-485</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">640nm laser</td>
			<td style="width:183px;">PicoQuant GmbH</td>
			<td style="width:119px;">LDH-D-C-640</td>
			<td></td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:204px;">Hydraharp 400 and TTTR acqusition software</td>
			<td style="width:183px;">PicoQuant</td>
			<td align="right" style="width:119px;">930021</td>
			<td>Picosecond event timer and Time Correlated Single Photon Coutning Unit, includes TTTR acqusition software</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:204px;">SEPIA II SLM 828 and SEPIA software</td>
			<td style="width:183px;">PicoQuant</td>
			<td align="right" style="width:119px;">910028</td>
			<td>Laser driver for picosecond pulses , includes SEPIA software controller.</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">computer</td>
			<td style="width:183px;">Dell</td>
			<td style="width:119px;">optiplex 7010</td>
			<td>cpu: i7-3770 ram:16GB</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:204px;">FRET Positioning and Screening (FPS) software</td>
			<td style="width:183px;">Heinrich Heine Unviersity</td>
			<td style="width:119px;"></td>
			<td>It include the Accesibel Volume clacualtor available at http://www.mpc.hhu.de/software/fps.html</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">MFD suite</td>
			<td style="width:183px;">Heinrich Heine Unviersity</td>
			<td style="width:119px;"></td>
			<td>It includes the BIFL software package Paris; Margarita for visualization of the multiparameter hisotrams, and Probability Distribution Analysis software availabel at http://www.mpc.hhu.de/software/software-package.html</td>
		</tr>
	</tbody>
</table>

high precision fret at single-molecule level for biomolecule structure determination

Un protocole sur la façon d&#39;effectuer des mesures de distances interdyeuses de haute précision en utilisant le transfert d&#39;énergie de résonance de Förster (FRET) au niveau de la seule molécule dans le mode de détection de fluorescence multiparamètre (MFD) est présenté ici. MFD maximise l&#39;utilisation de toutes les &quot;dimensions&quot; de la fluorescence pour réduire les artefacts photophysiques et expérimentaux et permet de mesurer la distance interdyeuse avec une précision allant jusqu&#39;à ~ 1 Å dans les biomolécules rigides. Ce procédé a été utilisé pour identifier trois états conformationnels du domaine de liaison au ligand du récepteur N-méthyl-D-aspartate (NMDA) pour expliquer l&#39;activation du récepteur lors de la liaison du ligand. En comparant les structures cristallographiques connues avec les mesures expérimentales, elles ont accepté moins de 3 Â pour des biomolécules plus dynamiques. La collecte d&#39;un ensemble de restrictions à distance qui couvre toute la dimension des biomolécules permettrait de fournir un modèle structurel de biomoléculaire dynamiqueEs.

Dans les expériences typiques smFRET utilisant une configuration MFD (lignes laser: 485 nm à 60 μW et 640 nm à 23 μW, section 5.1), l&#39;échantillon de fluorescence est dilué à une faible concentration picomolaire (10 -12 M = 1 pM) et placé Dans un microscope confocal, où une impulsion laser sous-nanoseconde excite des molécules marquées diffusant librement à travers un volume d&#39;excitation. Un volume confocal typique est &lt;4 femtoliters (fL). À de faibles ...

Watch this Scientific Journal Video about High Precision FRET at Single-molecule Level for Biomolecule Structure Determination at JoVE.com

High Precision FRET at Single-molecule Level for Biomolecule Structure Determination

Un protocole pour les expériences FRET de haute précision au niveau de la molécule unique est présenté ici. En outre, cette méthodologie peut être utilisée pour identifier trois états conformationnels dans le domaine de liaison au ligand du récepteur N-méthyl-D-aspartate (NMDA). La détermination de distances précises est la première étape vers la construction de modèles structurels basés sur des expériences FRET.

FRET de haute précision au niveau d&#39;une molécule pour la détermination de la structure biomoléculaire

A protocol on how to perform high-precision interdye distance measurements using F&#246;rster resonance energy transfer (FRET) at the single-molecule ...

The overall goal of this protocol is to perform high precision inter-dye distance measurements using multi-parameter fluorescence detection of F

high-precision-fret-at-single-molecule-level-for-biomolecule

Research

JoVE Journal

Biochemistry

10.6K vues.  Clemson University. The overall goal of this protocol is to perform high precision inter-dye distance measurements using multi-parameter fluorescence detection of F

Vidéo: High Precision FRET at Single-molecule Level for Biomolecule Structure Determination

Structural Information from Single-molecule FRET Experiments Using the Fast Nano-positioning System

Single-molecule F&#246;rster Resonance Energy Transfer (smFRET) can be used to obtain structural information on biomolecular complexes in real-time. Thereby, multiple smFRET measurements are used to localize an unknown dye position inside a protein complex by means of trilateration. In order to obtain quantitative information, the Nano-Positioning System (NPS) uses probabilistic data analysis to combine structural information from X-ray crystallography with single-molecule fluorescence data to calculate not only the most probable position but the complete three-dimensional probability distribution, termed posterior, which indicates the experimental uncertainty. The concept was generalized for the analysis of smFRET networks containing numerous dye molecules. The latest version of NPS, Fast-NPS, features a new algorithm using Bayesian parameter estimation based on Markov Chain Monte Carlo sampling and parallel tempering that allows for the analysis of large smFRET networks in a comparably short time. Moreover, Fast-NPS allows the calculation of the posterior by choosing one of five different models for each dye, that account for the different spatial and orientational behavior exhibited by the dye molecules due to their local environment.
Here we present a detailed protocol for obtaining smFRET data and applying the Fast-NPS. We provide detailed instructions for the acquisition of the three input parameters of Fast-NPS: the smFRET values, as well as the quantum yield and anisotropy of the dye molecules. Recently, the NPS has been used to elucidate the architecture of an archaeal open promotor complex. This data is used to demonstrate the influence of the five different dye models on the posterior distribution.

We present the setup and experimental procedure to obtain smFRET data from large donor-acceptor networks with a TIRF microscope. The step-by-step analysis of these measurements with the Bayesian inference software Fast-NPS yields high-resolved structural information via the application of adapted dye models.

Information sur la structure à partir d&#39;une seule molécule FRET expériences utilisant la Nano-positionnement Système rapide

Single-molecule F&#246;rster Resonance Energy Transfer (smFRET) can be used to obtain structural information on biomolecular complexes in real-time. ...

Recherche

Biochimie

Single-molecule Manipulation of G-quadruplexes by Magnetic Tweezers

Non-canonical nucleic acid secondary structure G-quadruplexes (G4) are involved in diverse cellular processes, such as DNA replication, transcription, RNA processing, and telomere elongation. During these processes, various proteins bind and resolve G4 structures to perform their function. As the function of G4 often depends on the stability of its folded structure, it is important to investigate how G4 binding proteins regulate the stability of G4. This work presents a method to manipulate single G4 molecules using magnetic tweezers, which enables studies of the regulation of G4 binding proteins on a single G4 molecule in real time. In general, this method is suitable for a wide scope of applications in studies for proteins/ligands interactions and regulations on various DNA or RNA secondary structures.

A single-molecule magnetic tweezers platform to manipulate G-quadruplexes is reported, which allows for the study of G4 stability and regulation by various proteins.

Manipulation de molécules simples de G-quadruplexes par pinces magnétiques

Non-canonical nucleic acid secondary structure G-quadruplexes (G4) are involved in diverse cellular processes, such as DNA replication, transcription, RNA ...

High Throughput, Absolute Determination of the Content of a Selected Protein at Tissue Levels Using Quantitative Dot Blot Analysis (QDB)

Lacking a convenient, quantitative, high throughput immunoblot method for absolute determination of the content of a specific protein at cellular and tissue level significantly hampers the progress in proteomic research. Results derived from currently available immunoblot techniques are also relative, preventing any efforts to combine independent studies with a large-scale analysis of protein samples. In this study, we demonstrate the process of quantitative dot blot analysis (QDB) to achieve absolute quantification in a high throughput format. Using a commercially available protein standard, we are able to determine the absolute content of capping actin protein, gelsolin-like (CAPG) in protein samples prepared from three different mouse tissues (kidney, spleen, and prostate) together with a detailed explanation of the experimental details. We propose the QDB analysis as a convenient, quantitative, high throughput immunoblot method of absolute quantification of individual proteins at the cellular and tissue level. This method will substantially aid biomarker validation and pathway verification in various areas of biological and biomedical research.

High Throughput, Absolute Determination of the Content of a Selected Protein at Tissue Levels Using Quantitative Dot Blot Analysis QDB

Here we demonstrate a detailed process of quantitative dot blot analysis (QDB) by determining the absolute content of a targeted protein, capping actin protein, gelsolin-like (CAPG), in three different mouse tissues. We demonstrate a high throughput, convenient, quantitative immunoblot technique for biomarker validation at the cellular and tissue level.

Haut débit, l’absolue détermination de la teneur d’une protéine sélectionnée aux niveaux de tissus en utilisant Quantitative Dot Blot Analysis (QDB)

Lacking a convenient, quantitative, high throughput immunoblot method for absolute determination of the content of a specific protein at cellular and ...

Using Three-color Single-molecule FRET to Study the Correlation of Protein Interactions

Single-molecule F&#246;rster resonance energy transfer (smFRET) has become a widely used biophysical technique to study the dynamics of biomolecules. For many molecular machines in a cell proteins have to act together&#160;with interaction partners in a functional cycle to fulfill their task. The extension of two-color to multi-color smFRET makes it possible to simultaneously probe more than one interaction or conformational change. This not only adds a new dimension to smFRET experiments but it also offers the unique possibility to directly study the sequence of events and to detect correlated interactions when using an immobilized sample and a total internal reflection fluorescence microscope (TIRFM). Therefore, multi-color smFRET is a versatile tool for studying biomolecular complexes in a quantitative manner and in a previously unachievable detail.
Here, we demonstrate how to overcome the special challenges of multi-color smFRET experiments on proteins. We present detailed protocols for obtaining the data and for extracting kinetic information. This includes trace selection criteria, state separation, and the recovery of state trajectories from the noisy data using a 3D ensemble Hidden Markov Model (HMM). Compared to other methods, the kinetic information is not recovered from dwell time histograms but directly from the HMM. The maximum likelihood framework allows us to critically evaluate the kinetic model and to provide meaningful uncertainties for the rates.
By applying our method to the heat shock protein 90 (Hsp90), we are able to disentangle the nucleotide binding and the global conformational changes of the protein. This allows us to directly observe the cooperativity between the two nucleotide binding pockets of the Hsp90 dimer.

Here, we present a protocol to obtain three-color smFRET data and its analysis with a 3D ensemble Hidden Markov Model. With this approach, scientists can extract kinetic information from complex protein systems, including cooperativity or correlated interactions.

À l’aide de trois couleurs frette de molécules simples pour étudier la corrélation des Interactions de protéine

Single-molecule F&#246;rster resonance energy transfer (smFRET) has become a widely used biophysical technique to study the dynamics of biomolecules. For ...

Proteome-wide Quantification of Labeling Homogeneity at the Single Molecule Level

Cell proteomes are often characterized using electrophoresis assays, where all species of proteins in the cells are non-specifically labeled with a fluorescent dye and are spotted by a photodetector following their separation. Single molecule fluorescence imaging can provide ultrasensitive protein detection with its ability for visualizing individual fluorescent molecules. However, the application of this powerful imaging method to electrophoresis assays is hampered by the lack of ways to characterize the homogeneity of fluorescent labeling of each protein species across the proteome. Here, we developed a method to evaluate the labeling homogeneity across the proteome based on a single molecule fluorescence imaging assay. In our measurement using a HeLa cell sample, the proportion of proteins labeled with at least one dye, which we termed &#8216;labeling occupancy&#8217; (LO), was determined to range from 50% to 90%, supporting the high potential of the application of single molecule imaging to sensitive and precise proteome analysis.

Here, we present a protocol to assess the labeling homogeneity for each protein species in a complex protein sample at the single molecule level.

Échelle du protéome Quantification d’homogénéité à l’échelle de la molécule unique d’étiquetage

Cell proteomes are often characterized using electrophoresis assays, where all species of proteins in the cells are non-specifically labeled with a ...

Single-Molecule Dwell-Time Analysis of Restriction Endonuclease-Mediated DNA Cleavage

This novel total internal reflection fluorescence microscopy-based assay facilitates the simultaneous measurement of the length of the catalytic cycle for hundreds of individual restriction endonuclease (REase) molecules in one experiment. This assay does not require protein labeling and can be carried out with a single imaging channel. In addition, the results of multiple individual experiments can be pooled to generate well-populated dwell-time distributions. Analysis of the resulting dwell-time distributions can help elucidate the DNA cleavage mechanism by revealing the presence of kinetic steps that cannot be directly observed. Example data collected using this assay with the well-studied REase, EcoRV - a dimeric Type IIP restriction endonuclease that cleaves the palindromic sequence GAT&#8595;ATC (where &#8595; is the cut site) - are in agreement with prior studies. These results suggest that there are at least three steps in the pathway to DNA cleavage that is initiated by introducing magnesium after EcoRV binds DNA in its absence, with an average rate of 0.17 s-1 for each step.

Using quantum-dot-labeled DNA and total internal reflection fluorescence microscopy, we can investigate the reaction mechanism of restriction endonucleases while using unlabeled protein. This single-molecule technique allows for massively multiplexed observation of individual protein-DNA interactions, and data can be pooled to generate well-populated dwell-time distributions.

Analyse du temps de séjour d’une molécule unique du clivage de l’ADN médié par l’endonucléase de restriction

This novel total internal reflection fluorescence microscopy-based assay facilitates the simultaneous measurement of the length of the catalytic cycle for ...

Making Precise and Accurate Single-Molecule FRET Measurements using the Open-Source smfBox

The smfBox is a recently developed cost-effective, open-source instrument for single-molecule F&#246;rster Resonance Energy Transfer (smFRET), which makes measurements on freely diffusing biomolecules more accessible. This overview includes a step-by-step protocol for using this instrument to make measurements of precise FRET efficiencies in duplex DNA samples, including details of the sample preparation, instrument setup and alignment, data acquisition, and complete analysis routines. The presented approach, which includes how to determine all the correction factors required for accurate FRET-derived distance measurements, builds on a large body of recent collaborative work across the FRET Community, which aims to establish standard protocols and analysis approaches. This protocol, which is easily adaptable to a range of biomolecular systems, adds to the growing efforts in democratising smFRET for the wider scientific community.

This article provides step-by-step instructions for making fully-corrected accurate FRET measurements on individual, freely diffusing biomolecules using the open-source, inexpensive smfBox, from switch on, through alignment and focusing, to data collection and analysis.

Effectuer des mesures FRET à molécule unique précises et précises à l’aide de la smfBox open source

The smfBox is a recently developed cost-effective, open-source instrument for single-molecule F&#246;rster Resonance Energy Transfer (smFRET), which makes ...

Single-Molecule Imaging of EWS-FLI1 Condensates Assembling on DNA

The fusion genes resulting from chromosomal translocation have been found in many solid tumors or leukemia. EWS-FLI1, which belongs to the FUS/EWS/TAF15 (FET) family of fusion oncoproteins, is one of the most frequently involved fusion genes in Ewing sarcoma. These FET family fusion proteins typically harbor a low-complexity domain (LCD) of FET protein at their N-terminus and a DNA-binding domain (DBD) at their C-terminus. EWS-FLI1 has been confirmed to form biomolecular condensates at its target binding loci due to LCD-LCD and LCD-DBD interactions, and these condensates can recruit RNA polymerase II to enhance gene transcription. However, how these condensates are assembled at their binding sites remains unclear. Recently, a single-molecule biophysics method-DNA Curtains-was applied to visualize these assembling processes of EWS-FLI1 condensates. Here, the detailed experimental protocol and data analysis approaches are discussed for the application of DNA Curtains in studying the biomolecular condensates assembling on target DNA.

Here, we describe the use of the single-molecule imaging method, DNA Curtains, to study the biophysical mechanism of EWS-FLI1 condensates assembling on DNA.

Imagerie à molécule unique de condensats EWS-FLI1 assemblés sur de l’ADN

The fusion genes resulting from chromosomal translocation have been found in many solid tumors or leukemia. EWS-FLI1, which belongs to the FUS/EWS/TAF15 ...

The Extraction of Liver Glycogen Molecules for Glycogen Structure Determination

Liver glycogen is a hyperbranched glucose polymer that is involved in the maintenance of blood sugar levels in animals. The properties of glycogen are influenced by its structure. Hence, a suitable extraction method that isolates representative samples of glycogen is crucial to the study of this macromolecule. Compared to other extraction methods, a method that employs a sucrose density gradient centrifugation step can minimize molecular damage. Based on this method, a recent publication describes how the density of the sucrose solution used during centrifugation was varied (30%, 50%, 72.5%) to find the most suitable concentration to extract glycogen particles of a wide variety of sizes, limiting the loss of smaller particles. A 10 min boiling step was introduced to test its ability to denature glycogen degrading enzymes, thus preserving glycogen. The lowest sucrose concentration (30%) and the addition of the boiling step were shown to extract the most representative samples of glycogen.

An optimal sucrose concentration was determined for the extraction of liver glycogen using sucrose density gradient centrifugation. The addition of a 10 min boiling step to inhibit glycogen-degrading enzymes proved beneficial.

L’extraction des molécules de glycogène hépatique pour la détermination de la structure du glycogène

Liver glycogen is a hyperbranched glucose polymer that is involved in the maintenance of blood sugar levels in animals. The properties of glycogen are ...

Visualizing the Conformational Dynamics of Membrane Receptors Using Single-Molecule FRET

The ability of cells to respond to external signals is essential for cellular development, growth, and survival. To respond to a signal from the environment, a cell must be able to recognize and process it. This task mainly relies on the function of membrane receptors, whose role is to convert signals into the biochemical language of the cell. G protein-coupled receptors (GPCRs) constitute the largest family of membrane receptor proteins in humans. Among GPCRs, metabotropic glutamate receptors (mGluRs) are a unique subclass that function as obligate dimers and possess a large extracellular domain that contains the ligand-binding site. Recent advances in structural studies of mGluRs have improved the understanding of their activation process. However, the propagation of large-scale conformational changes through mGluRs during activation and modulation is poorly understood. Single-molecule fluorescence resonance energy transfer (smFRET) is a powerful technique to visualize and quantify the structural dynamics of biomolecules at the single-protein level. To visualize the dynamic process of mGluR2 activation, fluorescent conformational sensors based on unnatural amino acid (UAA) incorporation were developed that allowed site-specific protein labeling without perturbation of the native structure of receptors. The protocol described here explains how to perform these experiments, including the novel UAA labeling approach, sample preparation, and smFRET data acquisition and analysis. These strategies are generalizable and can be extended to investigate the conformational dynamics of a variety of membrane proteins.

This study presents a detailed procedure to perform single-molecule fluorescence resonance energy transfer (smFRET) experiments on G protein-coupled receptors (GPCRs) using site-specific labeling via unnatural amino acid (UAA) incorporation. The protocol provides a step-by-step guide for smFRET sample preparation, experiments, and data analysis.