VJ e HS riconoscono il supporto da NIH R01 GM094246 a VJ. HS riconosce fondi di start-up dal Clemson University Creative Inquiry Program e dal Centro per le Tecnologie di Scienza e Tecnologia dei Materiali Ottici presso l&#39;Università Clemson. Questo progetto è stato inoltre sostenuto da una borsa di studio del Centro Keck per l&#39;addestramento di bioscienza interdisciplinare dei Consorzi della Costa del Golfo (NIGMS Grant No. 1 T32GM089657-05) e dello Schissler Foundation Fellowship for Translational Studies di comuni malattie umane a DD. Il contenuto è esclusivamente responsabile degli autori e non rappresenta necessariamente le opinioni ufficiali degli Istituti Nazionali di Salute.

Tutti gli autori dichiarano di non avere interessi finanziari concorrenti con i contenuti di questo articolo.

In questo lavoro viene presentato il protocollo per allineare, calibrare e misurare le distanze interdite con alta precisione usando esperimenti FRET di una molecola PIE-MFD. Calibrando attentamente tutti i parametri strumentali, è possibile aumentare l&#39;accuratezza delle distanze misurate e raggiungere l&#39;accuratezza di Angstrom. A tal fine vengono utilizzati diversi istogrammi multidimensionali per analizzare e identificare le popolazioni per ulteriori caratterizzazioni. Utilizzando il tempo medio di macro per ...

Un obiettivo fondamentale degli studi di biologia strutturale è quello di svelare il rapporto tra la struttura e la funzione delle macchine biomolecolari. La prima impressione visiva delle biomolecole ( es. Proteine ​​e acidi nucleici) si è verificata negli anni &#39;50 attraverso la cristallografia a raggi X a sviluppo. La cristallografia a raggi X fornisce informazioni strutturali statiche ad alta risoluzione, vincolate dall&#39;imballaggio in cristallo. Pertanto, l&#39;immobilità intrinseca dei modelli strutturali a raggi X evita la natura dinamica delle biomolecole, un fattore che influenza la maggior parte delle funzioni biologiche 3 , 4 , 5 . La risonanza magnetica nucleare (NMR) 6 , 7 , 8 ha fornito una soluzione alternativa al problema risolvendo i modelli strutturali in soluzioni acquose. Un grande vantaggioDi NMR è la sua capacità di recuperare la natura dinamica intrinseca delle biomolecole e degli ensemble conformazionali, che aiuta a chiarire le relazioni intrinseche tra struttura, dinamica e funzione 3 , 4 , 5 . Tuttavia, NMR, limitato per dimensione del campione e grandi quantità di campioni, richiede strategie complesse di etichettatura per i sistemi più grandi. Pertanto, c&#39;è una necessità urgente di sviluppare metodi alternativi nella biologia strutturale. Storicamente, il trasferimento di energia di risonanza di Förster (FRET) 9 non ha assunto un ruolo importante nella biologia strutturale a causa del malinteso che FRET fornisce misure di distanza a bassa precisione. Lo scopo di questo protocollo è quello di rivedere la capacità di FRET di determinare le distanze sulla scala nanometrica, in modo tale che queste distanze possano essere utilizzate per la costruzione di modelli strutturali di biomolecole. La prima verifica sperimentaleLa dipendenza della R - 6 dall&#39;efficienza FRET è stata fatta da Stryer nel 1967 10 misurando poliproline di varie lunghezze come &quot;righello spettroscopico&quot;. Un esperimento simile è stato raggiunto a livello monomolecolare nel 2005 11 . Le molecole di poliproline risultarono non ideali e quindi le molecole a DNA a doppio filamento sono state successivamente utilizzate 12 . Questo ha aperto la finestra per la misurazione precisa delle distanze e l&#39;idea di utilizzare FRET per identificare le proprietà strutturali delle biomolecole. FRET è ottimale quando la distanza di interdye è da ~ 0.6-1.3 R 0 , dove R 0 è la distanza di Förster. Per i fluorofori tipici utilizzati nei singoli esperimenti di FRET, R 0 è ~ 50 Å. Tipicamente, FRET offre molti vantaggi rispetto ad altri metodi nella sua capacità di risolvere e differenziare le strutture e le dinamicheI sistemi eterogenei: (i) A causa della massima sensibilità della fluorescenza, gli esperimenti FRET a singola molecola 13 , 14 , 15 , 16 possono risolvere complessi eterogene contando direttamente e caratterizzando simultaneamente le strutture dei singoli membri. (Ii) I percorsi complessi di reazione possono essere decifrati direttamente negli studi di FRET mono-molecolari perché non è necessaria alcuna sincronizzazione di un ensemble. (Iii) FRET può accedere a un&#39;ampia gamma di domini temporali che durano più di 10 decenni nel tempo, coprendo un&#39;ampia gamma di dinamica biologicamente rilevanti. Iv) Gli esperimenti FRET possono essere eseguiti in tutte le condizioni di soluzione, sia in vitro sia in vivo . La combinazione di FRET con microscopia a fluorescenza consente lo studio delle strutture molecolari e delle interazioni direttamente nelle cellule viventi 15 , 16 , </<html> Sup&gt; 17 , 18 , 19 , anche con alta precisione 20 . (V) FRET può essere applicato a sistemi di quasi tutte le dimensioni ( ad es. Oligomeri poliprolina 21 , 22 , 23 , 24 , Hsp90 25 , reversi transcriptasi HIV 26 e ribosomi 27 ). Vi) Infine, una rete di distanze che contenga tutta la dimensionalità delle biomolecole potrebbe essere utilizzata per derivare modelli strutturali di molecole statiche o dinamiche 18 , 28 , 29 , 30 , 31 , 32 , 33 , 34 ,Ref &quot;&gt; 35 , 36 , 37 . Pertanto, la spettroscopia FRET a singola molecola può essere utilizzata per ottenere distanze sufficientemente precise da utilizzare per la modellazione strutturale a distanza 26 . Ciò è possibile sfruttando il rilevamento di fluorescenza multiparametri (MFD) 28 , 38 , 39 , 40 , 41 , 42 , che utilizza otto dimensioni di informazioni di fluorescenza ( es. Spettro di eccitazione, spettro di fluorescenza, anisotropia, durata della fluorescenza, Tempo macroscopico, intensità della fluorescenza e distanza tra i fluorofori) per fornire precisi e precisi ritratti di distanza. Inoltre, l&#39;eccitazione interpolata pulsata (PIE) è combinata con MFD(PIE-MFD) 42 per monitorare la fluorescenza dell&#39;accettore di eccitazione diretta e per selezionare eventi a singola molecola derivanti da campioni contenenti uno stoichiometria donatore da accettazione a 1: 1. Una tipica configurazione PIE-MFD utilizza laser a eccitazione interpolati a due pulsanti collegati ad un corpo microscopio confocale, dove il rilevamento fotonico è suddiviso in quattro canali diversi in diverse finestre spettrali e nelle caratteristiche di polarizzazione. Ulteriori dettagli possono essere trovati nella Figura 1 . È importante notare che la FRET deve essere combinata con metodi computazionali per ottenere modelli strutturali simili a quelli atomici che sono coerenti con i risultati FRET 26 , 30 . Non è l&#39;obiettivo del presente protocollo di superare la metodologia associata per costruire modelli strutturali con distanze derivate da FRET. Tuttavia, questi approcci sono stati applicati in combinazione con altre tecniche ( ad esempio, dispersione a raggi X a piccole angolazioni)O risonanza paramagnetica dell&#39;elettrone), dando vita al campo della biologia strutturale integrativa 43 , 44 , 45 , 46 . L&#39;obiettivo attuale è quello di aprire la strada a FRET come strumento quantitativo nella biologia strutturale. Ad esempio, questa metodologia è stata usata per identificare tre stati conformazionali nel dominio legante-legame (LBD) del recettore N-methyl-D-aspartato (NMDA). Il fine ultimo è quello di superare le limitazioni di cui sopra e di portare FRET tra i metodi integrativi utilizzati per la determinazione strutturale delle biomolecole fornendo distanze misurate con alta precisione.

<table border="0" cellpadding="0" cellspacing="0" width="672">
	<tbody>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">charcoal</td>
			<td style="width:183px;">Merck KGaA</td>
			<td style="width:119px;">K42964486 320</td>
			<td style="width:167px;"></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">syringe filter</td>
			<td style="width:183px;">Fisherbrand</td>
			<td style="width:119px;">09-719C</td>
			<td>size: 0.20um</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">chambered coverglass</td>
			<td style="width:183px;">Fisher Scientific</td>
			<td align="right" style="width:119px;">155409</td>
			<td>1.5 borosilicate glass, 8 wells</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">microscope cover glass</td>
			<td style="width:183px;">Fisher Scientific</td>
			<td style="width:119px;">063014-9</td>
			<td>size: 24X60-1.5</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">Nuclease free water</td>
			<td style="width:183px;">Fisher Scientific</td>
			<td style="width:119px;">148859</td>
			<td>nuclease free</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">tween-20</td>
			<td style="width:183px;">Thermo Scientific</td>
			<td style="width:119px;">28320</td>
			<td>10% solution of Polysorbate 20</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:204px;">acceptor DNA strand (High FRET)</td>
			<td style="width:183px;">Integrated DNA Technologies</td>
			<td style="width:119px;">178124895</td>
			<td>5&#180;-d(CGG CCT ATT TCG GAG TTG TAA ACA GAG AT(Cy5)C GCC TTA AAC GTT CGC CTA GAC TAG TCC AAG TAT TGC)</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:204px;">acceptor DNA strand (Low FRET)</td>
			<td style="width:183px;">Integrated DNA Technologies</td>
			<td style="width:119px;">177956424</td>
			<td>5&#180;-d(CGG CCT ATT TCG GAG TTG TAA ACA GAG ATC GCC TT(Cy5)A AAC GTT CGC CTA GAC TAG TCC AAG TAT TGC)</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:204px;">donor DNA strand</td>
			<td style="width:183px;">Integrated DNA Technologies</td>
			<td style="width:119px;">177951437</td>
			<td>5&#180; -d(GCA ATA CTT GGA CTA GTC TAG GCG AAC GTT TAA GGC GAT CTC TGT TT(Alexa488)A CAA CTC CGA AAT AGG CCG)</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:204px;">DNA strand (No FRET)</td>
			<td style="width:183px;">Integrated DNA Technologies</td>
			<td style="width:119px;"></td>
			<td>5&#180; -d(CGG CCT ATT TCG GAG TTG TAA ACA GAG ATC GCC TTA AAC GTT CGC CTA GAC TAG TCC AAG TAT TGC)</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">thermal cycler</td>
			<td style="width:183px;">Eppendorf</td>
			<td style="width:119px;">E6331000025</td>
			<td>nexus gradient</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:204px;">Alexa Fluor 488 C5&#160;Maleimide</td>
			<td style="width:183px;">Thermo Scientific</td>
			<td style="width:119px;">A10254</td>
			<td>termed cyan-green fluorophore in the manuscript</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:204px;">Alexa Fluor 647 C2&#160;Maleimide</td>
			<td style="width:183px;">Thermo Scientific</td>
			<td style="width:119px;">A20347</td>
			<td>termed far-red fluorophore in the manuscript</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">Rhodamine 110</td>
			<td style="width:183px;">Sigma-Aldrich</td>
			<td style="width:119px;">83695-250MG</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">Rhodamine 101</td>
			<td style="width:183px;">Sigma-Aldrich</td>
			<td style="width:119px;">83694-500MG</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">LB Broth, Miller</td>
			<td style="width:183px;">Fisher Scientific</td>
			<td style="width:119px;">BP1426</td>
			<td>For culture of E. coli</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">Ampicillin</td>
			<td style="width:183px;">Sigma-Aldrich</td>
			<td style="width:119px;">A0166</td>
			<td>Used at 100 ug/ml final concentration in selective LB medium to maintain plasmid selection</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">Tetracyline&#160;</td>
			<td style="width:183px;">Calbiochem</td>
			<td style="width:119px;">58346</td>
			<td>Used at 12.5 ug/ml final concentration in selective LB medium to maintain gor (flutathione reductase) mutation in Origami B(DE3) strains to facilitate disulfide bond oxidation</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">Kanamycin</td>
			<td style="width:183px;">Fisher Scientific</td>
			<td style="width:119px;">BP906-5</td>
			<td>Used at 15 ug/ml final concentration in selective LB medium to maintain trxB (rhioredoxin reductase) mutation in B(DE3) stains to facilitate disulfide bond oxidation</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:204px;">Origami B(DE3) Competent Cells</td>
			<td style="width:183px;">Millipore</td>
			<td style="width:119px;">70837-3</td>
			<td>Competent E. coli cells for expression of protein with disulfide bridges</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:204px;">Isopropyl-&#946;-D-thiogalactopyranoside (IPTG)</td>
			<td style="width:183px;">Fisher Scientific</td>
			<td style="width:119px;">BP1755</td>
			<td>For induction of E. coli protein expression</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">HiTrap Chelating HP</td>
			<td style="width:183px;">GE Life Sciences</td>
			<td style="width:119px;">17-0409-01</td>
			<td>For Large-scale FPLC Purification of His-tagged protein</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">Imidazole</td>
			<td style="width:183px;">Sigma-Aldrich</td>
			<td align="right" style="width:119px;">56749</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">Ni-NTA Agarose&#160;</td>
			<td style="width:183px;">Qiagen</td>
			<td align="right" style="width:119px;">30210</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">PD-10 Desalting Column</td>
			<td style="width:183px;">GE Life Sciences</td>
			<td style="width:119px;">17-0851-01</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">AktaPurifier</td>
			<td style="width:183px;">GE Life Sciences</td>
			<td align="right" style="width:119px;">28406264</td>
			<td>FPLC Instrument</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">Dialysis tubing</td>
			<td style="width:183px;">Spectrum labs</td>
			<td style="width:119px;">132562</td>
			<td>15 kD MWCO 24 mm Flath width, 10 meters/roll</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:204px;">Dichroics</td>
			<td style="width:183px;">Semrock</td>
			<td style="width:119px;">FF500/646-Di01-25x36</td>
			<td>500/646 BrightLight</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">50/50 Beam splitter polarizer</td>
			<td style="width:183px;">Qioptiq Linos&#160;</td>
			<td style="width:119px;">G33 5743 000</td>
			<td>10x10 film polarizer</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:204px;">Green pass filer</td>
			<td style="width:183px;">Chroma</td>
			<td style="width:119px;">ET525/50m</td>
			<td style="width:167px;">ET525/50m 25 mm diameter mount</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">Red pass filter</td>
			<td style="width:183px;">Chroma</td>
			<td>ET720/150m</td>
			<td>ET720/150m 25 mm diameter mount</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">Power Meter</td>
			<td style="width:183px;">ThorLabd</td>
			<td style="width:119px;">PM200</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">UV-Vis spectrophotometer</td>
			<td style="width:183px;">Varian</td>
			<td style="width:119px;">Cary300Bio</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">Fluorolog 3 fluorometer</td>
			<td style="width:183px;">Horiba</td>
			<td style="width:119px;">FL3-22-R3</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">Fluorohub TCSPC controller</td>
			<td style="width:183px;">Horiba</td>
			<td style="width:119px;">Fluorohub-B</td>
			<td>TCSPC electronics for ensemble measurements</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">NanoLed 485L</td>
			<td style="width:183px;">Horiba</td>
			<td style="width:119px;">485L</td>
			<td>Blue diode laser</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">NanoLed 635L</td>
			<td style="width:183px;">Horiba</td>
			<td style="width:119px;">635L</td>
			<td>Red diode laser</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">Olympus IX73 Microscope</td>
			<td style="width:183px;">Olympus</td>
			<td style="width:119px;">IX73P2F</td>
			<td>Microscope frame</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">PMA 40 Hybrid Detector</td>
			<td style="width:183px;">PicoQuant GmbH</td>
			<td style="width:119px;">932200, PMA 40</td>
			<td>Optimized for green detection</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">PMA 50 Hybrid Detector</td>
			<td style="width:183px;">PicoQuant GmbH</td>
			<td style="width:119px;">932201, PMA 50</td>
			<td>Optimized for ed shifter sensitivity</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">485nm laser</td>
			<td style="width:183px;">PicoQuant GmbH</td>
			<td style="width:119px;">LDH-D-C-485</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">640nm laser</td>
			<td style="width:183px;">PicoQuant GmbH</td>
			<td style="width:119px;">LDH-D-C-640</td>
			<td></td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:204px;">Hydraharp 400 and TTTR acqusition software</td>
			<td style="width:183px;">PicoQuant</td>
			<td align="right" style="width:119px;">930021</td>
			<td>Picosecond event timer and Time Correlated Single Photon Coutning Unit, includes TTTR acqusition software</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:204px;">SEPIA II SLM 828 and SEPIA software</td>
			<td style="width:183px;">PicoQuant</td>
			<td align="right" style="width:119px;">910028</td>
			<td>Laser driver for picosecond pulses , includes SEPIA software controller.</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">computer</td>
			<td style="width:183px;">Dell</td>
			<td style="width:119px;">optiplex 7010</td>
			<td>cpu: i7-3770 ram:16GB</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:204px;">FRET Positioning and Screening (FPS) software</td>
			<td style="width:183px;">Heinrich Heine Unviersity</td>
			<td style="width:119px;"></td>
			<td>It include the Accesibel Volume clacualtor available at http://www.mpc.hhu.de/software/fps.html</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">MFD suite</td>
			<td style="width:183px;">Heinrich Heine Unviersity</td>
			<td style="width:119px;"></td>
			<td>It includes the BIFL software package Paris; Margarita for visualization of the multiparameter hisotrams, and Probability Distribution Analysis software availabel at http://www.mpc.hhu.de/software/software-package.html</td>
		</tr>
	</tbody>
</table>

high precision fret at single-molecule level for biomolecule structure determination

Qui viene illustrato un protocollo su come effettuare misure di distanza interdette ad alta precisione utilizzando il trasferimento di energia di risonanza di Förster (FRET) a livello di singola molecola nel modo di rilevamento a fluorescenza multiparametrica (MFD). MFD massimizza l&#39;utilizzo di tutte le &quot;dimensioni&quot; della fluorescenza per ridurre gli artefatti fotofisicali e sperimentali e permette di misurare la distanza interdetta con una precisione fino a ~ 1 Å in biomolecole rigide. Questo metodo è stato utilizzato per identificare tre stati conformazionali del dominio ligando-legame del recettore N-methyl-D-aspartato (NMDA) per spiegare l&#39;attivazione del recettore dopo legame legame. Quando si confrontano le strutture cristallografiche note con misure sperimentali, si sono accordati entro meno di 3 Å per biomolecole più dinamiche. Raccogliere un insieme di limitazioni di distanza che copre l&#39;intera dimensionalità delle biomolecole permetterebbe di fornire un modello strutturale di biomoleculo dinamicoes.

Negli esperimenti tipici smFRET che utilizzano una configurazione MFD (linee laser: 485 nm a 60 μW e 640 nm a 23 μW, sezione 5.1), il campione di fluorescenza viene diluito a una concentrazione picomolare bassa ( 10-12 M = 1 pM) In un microscopio confocale, dove un impulso laser sub-nanosecondo eccita molecole etichette che diffondono liberamente attraverso un volume di eccitazione. Un volume confocale tipico è &lt;4 femtolitri (fL). A tali basse concentrazioni, solo una si...

Watch this Scientific Journal Video about High Precision FRET at Single-molecule Level for Biomolecule Structure Determination at JoVE.com

High Precision FRET at Single-molecule Level for Biomolecule Structure Determination

Qui viene presentato un protocollo per esperimenti FRET ad alta precisione a livello di singola molecola. Inoltre, questa metodologia può essere usata per identificare tre stati conformazionali nel dominio legante del legame del recettore N-metil-D-aspartato (NMDA). Determinare le distanze precise è il primo passo verso la costruzione di modelli strutturali basati su esperimenti FRET.

FRET di alta precisione a singolo livello molecolare per la determinazione della struttura biomolecola

A protocol on how to perform high-precision interdye distance measurements using F&#246;rster resonance energy transfer (FRET) at the single-molecule ...

The overall goal of this protocol is to perform high precision inter-dye distance measurements using multi-parameter fluorescence detection of F

high-precision-fret-at-single-molecule-level-for-biomolecule

Research

JoVE Journal

Biochemistry

10.6K Views.  Clemson University. The overall goal of this protocol is to perform high precision inter-dye distance measurements using multi-parameter fluorescence detection of F

Video: High Precision FRET at Single-molecule Level for Biomolecule Structure Determination

Structural Information from Single-molecule FRET Experiments Using the Fast Nano-positioning System

Single-molecule F&#246;rster Resonance Energy Transfer (smFRET) can be used to obtain structural information on biomolecular complexes in real-time. Thereby, multiple smFRET measurements are used to localize an unknown dye position inside a protein complex by means of trilateration. In order to obtain quantitative information, the Nano-Positioning System (NPS) uses probabilistic data analysis to combine structural information from X-ray crystallography with single-molecule fluorescence data to calculate not only the most probable position but the complete three-dimensional probability distribution, termed posterior, which indicates the experimental uncertainty. The concept was generalized for the analysis of smFRET networks containing numerous dye molecules. The latest version of NPS, Fast-NPS, features a new algorithm using Bayesian parameter estimation based on Markov Chain Monte Carlo sampling and parallel tempering that allows for the analysis of large smFRET networks in a comparably short time. Moreover, Fast-NPS allows the calculation of the posterior by choosing one of five different models for each dye, that account for the different spatial and orientational behavior exhibited by the dye molecules due to their local environment.
Here we present a detailed protocol for obtaining smFRET data and applying the Fast-NPS. We provide detailed instructions for the acquisition of the three input parameters of Fast-NPS: the smFRET values, as well as the quantum yield and anisotropy of the dye molecules. Recently, the NPS has been used to elucidate the architecture of an archaeal open promotor complex. This data is used to demonstrate the influence of the five different dye models on the posterior distribution.

We present the setup and experimental procedure to obtain smFRET data from large donor-acceptor networks with a TIRF microscope. The step-by-step analysis of these measurements with the Bayesian inference software Fast-NPS yields high-resolved structural information via the application of adapted dye models.

Informazioni strutturale da singola molecola di FRET esperimenti usando il Nano-Positioning System Veloce

Single-molecule F&#246;rster Resonance Energy Transfer (smFRET) can be used to obtain structural information on biomolecular complexes in real-time. ...

Ricerca

Biochimica

Single-molecule Manipulation of G-quadruplexes by Magnetic Tweezers

Non-canonical nucleic acid secondary structure G-quadruplexes (G4) are involved in diverse cellular processes, such as DNA replication, transcription, RNA processing, and telomere elongation. During these processes, various proteins bind and resolve G4 structures to perform their function. As the function of G4 often depends on the stability of its folded structure, it is important to investigate how G4 binding proteins regulate the stability of G4. This work presents a method to manipulate single G4 molecules using magnetic tweezers, which enables studies of the regulation of G4 binding proteins on a single G4 molecule in real time. In general, this method is suitable for a wide scope of applications in studies for proteins/ligands interactions and regulations on various DNA or RNA secondary structures.

A single-molecule magnetic tweezers platform to manipulate G-quadruplexes is reported, which allows for the study of G4 stability and regulation by various proteins.

Manipolazione di singola molecola di G-quadruplex di pinzette magnetiche

Non-canonical nucleic acid secondary structure G-quadruplexes (G4) are involved in diverse cellular processes, such as DNA replication, transcription, RNA ...

High Throughput, Absolute Determination of the Content of a Selected Protein at Tissue Levels Using Quantitative Dot Blot Analysis (QDB)

Lacking a convenient, quantitative, high throughput immunoblot method for absolute determination of the content of a specific protein at cellular and tissue level significantly hampers the progress in proteomic research. Results derived from currently available immunoblot techniques are also relative, preventing any efforts to combine independent studies with a large-scale analysis of protein samples. In this study, we demonstrate the process of quantitative dot blot analysis (QDB) to achieve absolute quantification in a high throughput format. Using a commercially available protein standard, we are able to determine the absolute content of capping actin protein, gelsolin-like (CAPG) in protein samples prepared from three different mouse tissues (kidney, spleen, and prostate) together with a detailed explanation of the experimental details. We propose the QDB analysis as a convenient, quantitative, high throughput immunoblot method of absolute quantification of individual proteins at the cellular and tissue level. This method will substantially aid biomarker validation and pathway verification in various areas of biological and biomedical research.

High Throughput, Absolute Determination of the Content of a Selected Protein at Tissue Levels Using Quantitative Dot Blot Analysis QDB

Here we demonstrate a detailed process of quantitative dot blot analysis (QDB) by determining the absolute content of a targeted protein, capping actin protein, gelsolin-like (CAPG), in three different mouse tissues. We demonstrate a high throughput, convenient, quantitative immunoblot technique for biomarker validation at the cellular and tissue level.

High Throughput, assoluta determinazione del contenuto di una proteina selezionato presso i livelli del tessuto utilizzando quantitativi Dot Blot analisi (QDB)

Lacking a convenient, quantitative, high throughput immunoblot method for absolute determination of the content of a specific protein at cellular and ...

Using Three-color Single-molecule FRET to Study the Correlation of Protein Interactions

Single-molecule F&#246;rster resonance energy transfer (smFRET) has become a widely used biophysical technique to study the dynamics of biomolecules. For many molecular machines in a cell proteins have to act together&#160;with interaction partners in a functional cycle to fulfill their task. The extension of two-color to multi-color smFRET makes it possible to simultaneously probe more than one interaction or conformational change. This not only adds a new dimension to smFRET experiments but it also offers the unique possibility to directly study the sequence of events and to detect correlated interactions when using an immobilized sample and a total internal reflection fluorescence microscope (TIRFM). Therefore, multi-color smFRET is a versatile tool for studying biomolecular complexes in a quantitative manner and in a previously unachievable detail.
Here, we demonstrate how to overcome the special challenges of multi-color smFRET experiments on proteins. We present detailed protocols for obtaining the data and for extracting kinetic information. This includes trace selection criteria, state separation, and the recovery of state trajectories from the noisy data using a 3D ensemble Hidden Markov Model (HMM). Compared to other methods, the kinetic information is not recovered from dwell time histograms but directly from the HMM. The maximum likelihood framework allows us to critically evaluate the kinetic model and to provide meaningful uncertainties for the rates.
By applying our method to the heat shock protein 90 (Hsp90), we are able to disentangle the nucleotide binding and the global conformational changes of the protein. This allows us to directly observe the cooperativity between the two nucleotide binding pockets of the Hsp90 dimer.

Here, we present a protocol to obtain three-color smFRET data and its analysis with a 3D ensemble Hidden Markov Model. With this approach, scientists can extract kinetic information from complex protein systems, including cooperativity or correlated interactions.

Usando tre colori singola molecola FRET per studiare la correlazione delle interazioni della proteina

Single-molecule F&#246;rster resonance energy transfer (smFRET) has become a widely used biophysical technique to study the dynamics of biomolecules. For ...

Proteome-wide Quantification of Labeling Homogeneity at the Single Molecule Level

Cell proteomes are often characterized using electrophoresis assays, where all species of proteins in the cells are non-specifically labeled with a fluorescent dye and are spotted by a photodetector following their separation. Single molecule fluorescence imaging can provide ultrasensitive protein detection with its ability for visualizing individual fluorescent molecules. However, the application of this powerful imaging method to electrophoresis assays is hampered by the lack of ways to characterize the homogeneity of fluorescent labeling of each protein species across the proteome. Here, we developed a method to evaluate the labeling homogeneity across the proteome based on a single molecule fluorescence imaging assay. In our measurement using a HeLa cell sample, the proportion of proteins labeled with at least one dye, which we termed &#8216;labeling occupancy&#8217; (LO), was determined to range from 50% to 90%, supporting the high potential of the application of single molecule imaging to sensitive and precise proteome analysis.

Here, we present a protocol to assess the labeling homogeneity for each protein species in a complex protein sample at the single molecule level.

Quantificazione di tutto il proteoma di etichettatura omogeneità a livello di singola molecola

Cell proteomes are often characterized using electrophoresis assays, where all species of proteins in the cells are non-specifically labeled with a ...

Single-Molecule Dwell-Time Analysis of Restriction Endonuclease-Mediated DNA Cleavage

This novel total internal reflection fluorescence microscopy-based assay facilitates the simultaneous measurement of the length of the catalytic cycle for hundreds of individual restriction endonuclease (REase) molecules in one experiment. This assay does not require protein labeling and can be carried out with a single imaging channel. In addition, the results of multiple individual experiments can be pooled to generate well-populated dwell-time distributions. Analysis of the resulting dwell-time distributions can help elucidate the DNA cleavage mechanism by revealing the presence of kinetic steps that cannot be directly observed. Example data collected using this assay with the well-studied REase, EcoRV - a dimeric Type IIP restriction endonuclease that cleaves the palindromic sequence GAT&#8595;ATC (where &#8595; is the cut site) - are in agreement with prior studies. These results suggest that there are at least three steps in the pathway to DNA cleavage that is initiated by introducing magnesium after EcoRV binds DNA in its absence, with an average rate of 0.17 s-1 for each step.

Using quantum-dot-labeled DNA and total internal reflection fluorescence microscopy, we can investigate the reaction mechanism of restriction endonucleases while using unlabeled protein. This single-molecule technique allows for massively multiplexed observation of individual protein-DNA interactions, and data can be pooled to generate well-populated dwell-time distributions.

Analisi del tempo di permanenza di una singola molecola della scissione del DNA mediata da endonucleasi di restrizione

This novel total internal reflection fluorescence microscopy-based assay facilitates the simultaneous measurement of the length of the catalytic cycle for ...

Making Precise and Accurate Single-Molecule FRET Measurements using the Open-Source smfBox

The smfBox is a recently developed cost-effective, open-source instrument for single-molecule F&#246;rster Resonance Energy Transfer (smFRET), which makes measurements on freely diffusing biomolecules more accessible. This overview includes a step-by-step protocol for using this instrument to make measurements of precise FRET efficiencies in duplex DNA samples, including details of the sample preparation, instrument setup and alignment, data acquisition, and complete analysis routines. The presented approach, which includes how to determine all the correction factors required for accurate FRET-derived distance measurements, builds on a large body of recent collaborative work across the FRET Community, which aims to establish standard protocols and analysis approaches. This protocol, which is easily adaptable to a range of biomolecular systems, adds to the growing efforts in democratising smFRET for the wider scientific community.

This article provides step-by-step instructions for making fully-corrected accurate FRET measurements on individual, freely diffusing biomolecules using the open-source, inexpensive smfBox, from switch on, through alignment and focusing, to data collection and analysis.

Effettuare misurazioni FRET a singola molecola precise e accurate utilizzando l'smfBox open source

The smfBox is a recently developed cost-effective, open-source instrument for single-molecule F&#246;rster Resonance Energy Transfer (smFRET), which makes ...

Single-Molecule Imaging of EWS-FLI1 Condensates Assembling on DNA

The fusion genes resulting from chromosomal translocation have been found in many solid tumors or leukemia. EWS-FLI1, which belongs to the FUS/EWS/TAF15 (FET) family of fusion oncoproteins, is one of the most frequently involved fusion genes in Ewing sarcoma. These FET family fusion proteins typically harbor a low-complexity domain (LCD) of FET protein at their N-terminus and a DNA-binding domain (DBD) at their C-terminus. EWS-FLI1 has been confirmed to form biomolecular condensates at its target binding loci due to LCD-LCD and LCD-DBD interactions, and these condensates can recruit RNA polymerase II to enhance gene transcription. However, how these condensates are assembled at their binding sites remains unclear. Recently, a single-molecule biophysics method-DNA Curtains-was applied to visualize these assembling processes of EWS-FLI1 condensates. Here, the detailed experimental protocol and data analysis approaches are discussed for the application of DNA Curtains in studying the biomolecular condensates assembling on target DNA.

Here, we describe the use of the single-molecule imaging method, DNA Curtains, to study the biophysical mechanism of EWS-FLI1 condensates assembling on DNA.

Imaging a singola molecola dell'assemblaggio di condensati EWS-FLI1 sul DNA

The fusion genes resulting from chromosomal translocation have been found in many solid tumors or leukemia. EWS-FLI1, which belongs to the FUS/EWS/TAF15 ...

The Extraction of Liver Glycogen Molecules for Glycogen Structure Determination

Liver glycogen is a hyperbranched glucose polymer that is involved in the maintenance of blood sugar levels in animals. The properties of glycogen are influenced by its structure. Hence, a suitable extraction method that isolates representative samples of glycogen is crucial to the study of this macromolecule. Compared to other extraction methods, a method that employs a sucrose density gradient centrifugation step can minimize molecular damage. Based on this method, a recent publication describes how the density of the sucrose solution used during centrifugation was varied (30%, 50%, 72.5%) to find the most suitable concentration to extract glycogen particles of a wide variety of sizes, limiting the loss of smaller particles. A 10 min boiling step was introduced to test its ability to denature glycogen degrading enzymes, thus preserving glycogen. The lowest sucrose concentration (30%) and the addition of the boiling step were shown to extract the most representative samples of glycogen.

An optimal sucrose concentration was determined for the extraction of liver glycogen using sucrose density gradient centrifugation. The addition of a 10 min boiling step to inhibit glycogen-degrading enzymes proved beneficial.

L'estrazione di molecole di glicogeno epatico per la determinazione della struttura del glicogeno

Liver glycogen is a hyperbranched glucose polymer that is involved in the maintenance of blood sugar levels in animals. The properties of glycogen are ...

Visualizing the Conformational Dynamics of Membrane Receptors Using Single-Molecule FRET

The ability of cells to respond to external signals is essential for cellular development, growth, and survival. To respond to a signal from the environment, a cell must be able to recognize and process it. This task mainly relies on the function of membrane receptors, whose role is to convert signals into the biochemical language of the cell. G protein-coupled receptors (GPCRs) constitute the largest family of membrane receptor proteins in humans. Among GPCRs, metabotropic glutamate receptors (mGluRs) are a unique subclass that function as obligate dimers and possess a large extracellular domain that contains the ligand-binding site. Recent advances in structural studies of mGluRs have improved the understanding of their activation process. However, the propagation of large-scale conformational changes through mGluRs during activation and modulation is poorly understood. Single-molecule fluorescence resonance energy transfer (smFRET) is a powerful technique to visualize and quantify the structural dynamics of biomolecules at the single-protein level. To visualize the dynamic process of mGluR2 activation, fluorescent conformational sensors based on unnatural amino acid (UAA) incorporation were developed that allowed site-specific protein labeling without perturbation of the native structure of receptors. The protocol described here explains how to perform these experiments, including the novel UAA labeling approach, sample preparation, and smFRET data acquisition and analysis. These strategies are generalizable and can be extended to investigate the conformational dynamics of a variety of membrane proteins.

This study presents a detailed procedure to perform single-molecule fluorescence resonance energy transfer (smFRET) experiments on G protein-coupled receptors (GPCRs) using site-specific labeling via unnatural amino acid (UAA) incorporation. The protocol provides a step-by-step guide for smFRET sample preparation, experiments, and data analysis.