VJとHSは、NIH R01 GM094246からVJへのサポートを承認します。 HSは、クレムソン大学創造的調査プログラムとクレムソン大学の光学材料科学技術技術センターからスタートアップ資金を受け取ります。このプロジェクトは、ガルフコーストコンソーシアムの学際的なバイオサイエンストレーニングのためのケックセンター（NIGMS助成金番号1 T32GM089657-05）と一般ヒト疾患の翻訳研究のためのシスラー基金研究奨学金によっても支援されました。内容は著者の責任であり、必ずしも国立衛生研究所の公式見解を表すものではありません。

すべての著者は、この記事の内容と競合する金銭的利益がないと宣言しています。

この研究では、PIE-MFD単分子FRET実験を使用して、高精度で粒子間距離を整列させ、較正し、測定するプロトコルが提示されている。すべての機器パラメータを慎重に較正することにより、測定距離の精度を高め、オングストロームの精度に達することができます。これを行うために、様々な多次元ヒストグラムを用いて、さらなる特徴付けのために集団を分析および同定する。測定されたサ?...

構造生物学研究の基本的な目的は、生体分子機械の構造と機能との関係を解明することである。生体分子（ 例えば、タンパク質や核酸）の最初の視覚的印象は、1950年代にX線結晶構造解析1,2によって生じました。 X線結晶解析は、結晶充填によって制約される高分解能、静的構造情報を提供する。したがって、X線構造モデルの固有の不動性は、ほとんどの生物学的機能に影響を及ぼす因子である生体分子の動的性質を排除する3,4,5。核磁気共鳴（NMR） 6,7,8 は、水溶液中の構造モデルを分解することによって、この問題に対する代替の解決法を提供した。大きな利点NMRは、構造、力学、および機能3,4,5の間の内在的な関係を明確にするのに役立つ、生体分子および立体構造アンサンブルの固有の動的性質を回復する能力である。それにもかかわらず、NMRは、試料の大きさおよび試料の大量によって制限され、より大きなシステムのための複雑な標識方法を必要とする。したがって、構造生物学における代替法を開発することが急務である。 歴史的に、フォルスター共鳴エネルギー移動（FRET） 9は、FRETが低精度の距離測定を提供するという誤解のために、構造生物学において重要な役割を果たしていない。このプロトコールの目的は、FRETがナノメートルスケールでの距離を決定する能力を再考することであり、そのような距離は、生体分子の構造モデルを構築するために使用することができる。最初の実験的検証FRET効率に対するR - 6依存の変化は、様々な長さのポリプロリンを「分光学的定規（spectroscopic ruler）」として測定することにより、1967年にStryerによって行われた。同様の実験が2005年の単一分子レベルで達成された11 。ポリプロリン分子は理想的ではないことが判明したので、後で二本鎖DNA分子を使用した。これにより、正確な距離測定のためのウィンドウが開き、FRETを使用して生体分子の構造特性を同定するというアイデアが開かれました。 眼間距離範囲が〜0.6〜1.3 R 0である場合、FRETは最適である。ここで、R 0はフォルスター距離である。単一分子FRET実験に用いられる典型的なフルオロフォアについては、 R 0は約50Åである。典型的には、FRETは、他の方法よりも多くの利点を提供し、その構造および動態を（i）蛍光の究極の感度のために、単分子FRET実験13,14,15,16は、個々のメンバーの構造を直接的に計数し同時に特徴付けることにより、異種アンサンブルを分解することができる。 （ii）複雑な反応経路は、アンサンブルの同期化が必要ないため、単一分子FRET研究で直接解読することができる。 （iii）FRETは、10年以上にわたる幅広い時間的領域にアクセスし、生物学的に関連する様々なダイナミクスをカバーすることができる。 （iv）FRET実験は、 インビトロおよびインビボの任意の溶液条件で行うことができる。 FRETと蛍光顕微鏡との組み合わせは、生きた細胞の分子構造および相互作用の直接的な研究を可能にする15,16 、 </<html>高精度20であっても17 ° 、 18 ° 、 19 °である。 （v）FRETは、ほぼ任意のサイズの系（ 例えば、ポリプロリンオリゴマー21,22,23,24、Hsp90 25 、HIV逆転写酵素26 、およびリボソーム27 ）に適用することができる。 （vi）最後に、生体分子のすべての次元性を含む距離のネットワークを用いて、静的分子または動的分子18,28,29,30,31,32,33,34,36の構造モデルを導出することができる。ref &quot;&gt; 35,36,37。 したがって、単一分子FRET分光法を使用して、距離制限構造モデル26に使用するのに十分正確な距離を導出することができます。これは、8つの次元の蛍光情報（ すなわち、励起スペクトル、蛍光スペクトル、異方性、蛍光寿命、蛍光量子収率など）を利用するマルチパラメータ蛍光検出（MFD）28,38,39,40,41,42を利用することによって可能である。巨視的時間、蛍光強度、および蛍光体間の距離）を正確かつ正確に提供して、距離制限を提供する。さらに、パルスインターリーブド励起（PIE）は、MFD（PIE-MFD） 42を用いて、直接励起アクセプター蛍光をモニターし、1：1ドナー - アクセプター化学量論を含むサンプルから生じる単一分子事象を選択する。典型的なPIE-MFDセットアップは、共焦点顕微鏡本体に接続された2パルスインターリーブ励起レーザーを使用し、光子検出は、異なるスペクトル窓および偏光特性の4つの異なるチャネルに分割される。詳細は図1を参照してください。 FRETは、FRET結果26,30と一致する原子的様構造モデルを達成するために、計算方法とFRETを組み合わせなければならないことに注意することが重要です。現在の議定書の目標は、関連する方法論を踏襲して、FRETに由来する距離を有する構造モデルを構築することではない。しかしながら、これらのアプローチは、他の技術（ 例えば、小角X線散乱または電子常磁性共鳴）、統合的な構造生物学の分野を生み出す43,44,45,46。現在の目標は、構造生物学の定量的ツールとしてFRETの道を開くことです。一例として、この方法を用いて、N-メチル-D-アスパラギン酸（NMDA）受容体のリガンド結合ドメイン（LBD）における3つの構造状態を同定した。最終的な目的は、前述の限界を克服し、測定距離を高精度で提供することによって生体分子の構造決定に使用される統合的方法の中でFRETをもたらすことである。

<table border="0" cellpadding="0" cellspacing="0" width="672">
	<tbody>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">charcoal</td>
			<td style="width:183px;">Merck KGaA</td>
			<td style="width:119px;">K42964486 320</td>
			<td style="width:167px;"></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">syringe filter</td>
			<td style="width:183px;">Fisherbrand</td>
			<td style="width:119px;">09-719C</td>
			<td>size: 0.20um</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">chambered coverglass</td>
			<td style="width:183px;">Fisher Scientific</td>
			<td align="right" style="width:119px;">155409</td>
			<td>1.5 borosilicate glass, 8 wells</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">microscope cover glass</td>
			<td style="width:183px;">Fisher Scientific</td>
			<td style="width:119px;">063014-9</td>
			<td>size: 24X60-1.5</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">Nuclease free water</td>
			<td style="width:183px;">Fisher Scientific</td>
			<td style="width:119px;">148859</td>
			<td>nuclease free</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">tween-20</td>
			<td style="width:183px;">Thermo Scientific</td>
			<td style="width:119px;">28320</td>
			<td>10% solution of Polysorbate 20</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:204px;">acceptor DNA strand (High FRET)</td>
			<td style="width:183px;">Integrated DNA Technologies</td>
			<td style="width:119px;">178124895</td>
			<td>5&#180;-d(CGG CCT ATT TCG GAG TTG TAA ACA GAG AT(Cy5)C GCC TTA AAC GTT CGC CTA GAC TAG TCC AAG TAT TGC)</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:204px;">acceptor DNA strand (Low FRET)</td>
			<td style="width:183px;">Integrated DNA Technologies</td>
			<td style="width:119px;">177956424</td>
			<td>5&#180;-d(CGG CCT ATT TCG GAG TTG TAA ACA GAG ATC GCC TT(Cy5)A AAC GTT CGC CTA GAC TAG TCC AAG TAT TGC)</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:204px;">donor DNA strand</td>
			<td style="width:183px;">Integrated DNA Technologies</td>
			<td style="width:119px;">177951437</td>
			<td>5&#180; -d(GCA ATA CTT GGA CTA GTC TAG GCG AAC GTT TAA GGC GAT CTC TGT TT(Alexa488)A CAA CTC CGA AAT AGG CCG)</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:204px;">DNA strand (No FRET)</td>
			<td style="width:183px;">Integrated DNA Technologies</td>
			<td style="width:119px;"></td>
			<td>5&#180; -d(CGG CCT ATT TCG GAG TTG TAA ACA GAG ATC GCC TTA AAC GTT CGC CTA GAC TAG TCC AAG TAT TGC)</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">thermal cycler</td>
			<td style="width:183px;">Eppendorf</td>
			<td style="width:119px;">E6331000025</td>
			<td>nexus gradient</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:204px;">Alexa Fluor 488 C5&#160;Maleimide</td>
			<td style="width:183px;">Thermo Scientific</td>
			<td style="width:119px;">A10254</td>
			<td>termed cyan-green fluorophore in the manuscript</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:204px;">Alexa Fluor 647 C2&#160;Maleimide</td>
			<td style="width:183px;">Thermo Scientific</td>
			<td style="width:119px;">A20347</td>
			<td>termed far-red fluorophore in the manuscript</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">Rhodamine 110</td>
			<td style="width:183px;">Sigma-Aldrich</td>
			<td style="width:119px;">83695-250MG</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">Rhodamine 101</td>
			<td style="width:183px;">Sigma-Aldrich</td>
			<td style="width:119px;">83694-500MG</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">LB Broth, Miller</td>
			<td style="width:183px;">Fisher Scientific</td>
			<td style="width:119px;">BP1426</td>
			<td>For culture of E. coli</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">Ampicillin</td>
			<td style="width:183px;">Sigma-Aldrich</td>
			<td style="width:119px;">A0166</td>
			<td>Used at 100 ug/ml final concentration in selective LB medium to maintain plasmid selection</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">Tetracyline&#160;</td>
			<td style="width:183px;">Calbiochem</td>
			<td style="width:119px;">58346</td>
			<td>Used at 12.5 ug/ml final concentration in selective LB medium to maintain gor (flutathione reductase) mutation in Origami B(DE3) strains to facilitate disulfide bond oxidation</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">Kanamycin</td>
			<td style="width:183px;">Fisher Scientific</td>
			<td style="width:119px;">BP906-5</td>
			<td>Used at 15 ug/ml final concentration in selective LB medium to maintain trxB (rhioredoxin reductase) mutation in B(DE3) stains to facilitate disulfide bond oxidation</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:204px;">Origami B(DE3) Competent Cells</td>
			<td style="width:183px;">Millipore</td>
			<td style="width:119px;">70837-3</td>
			<td>Competent E. coli cells for expression of protein with disulfide bridges</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:204px;">Isopropyl-&#946;-D-thiogalactopyranoside (IPTG)</td>
			<td style="width:183px;">Fisher Scientific</td>
			<td style="width:119px;">BP1755</td>
			<td>For induction of E. coli protein expression</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">HiTrap Chelating HP</td>
			<td style="width:183px;">GE Life Sciences</td>
			<td style="width:119px;">17-0409-01</td>
			<td>For Large-scale FPLC Purification of His-tagged protein</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">Imidazole</td>
			<td style="width:183px;">Sigma-Aldrich</td>
			<td align="right" style="width:119px;">56749</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">Ni-NTA Agarose&#160;</td>
			<td style="width:183px;">Qiagen</td>
			<td align="right" style="width:119px;">30210</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">PD-10 Desalting Column</td>
			<td style="width:183px;">GE Life Sciences</td>
			<td style="width:119px;">17-0851-01</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">AktaPurifier</td>
			<td style="width:183px;">GE Life Sciences</td>
			<td align="right" style="width:119px;">28406264</td>
			<td>FPLC Instrument</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">Dialysis tubing</td>
			<td style="width:183px;">Spectrum labs</td>
			<td style="width:119px;">132562</td>
			<td>15 kD MWCO 24 mm Flath width, 10 meters/roll</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:204px;">Dichroics</td>
			<td style="width:183px;">Semrock</td>
			<td style="width:119px;">FF500/646-Di01-25x36</td>
			<td>500/646 BrightLight</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">50/50 Beam splitter polarizer</td>
			<td style="width:183px;">Qioptiq Linos&#160;</td>
			<td style="width:119px;">G33 5743 000</td>
			<td>10x10 film polarizer</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:204px;">Green pass filer</td>
			<td style="width:183px;">Chroma</td>
			<td style="width:119px;">ET525/50m</td>
			<td style="width:167px;">ET525/50m 25 mm diameter mount</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">Red pass filter</td>
			<td style="width:183px;">Chroma</td>
			<td>ET720/150m</td>
			<td>ET720/150m 25 mm diameter mount</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">Power Meter</td>
			<td style="width:183px;">ThorLabd</td>
			<td style="width:119px;">PM200</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">UV-Vis spectrophotometer</td>
			<td style="width:183px;">Varian</td>
			<td style="width:119px;">Cary300Bio</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">Fluorolog 3 fluorometer</td>
			<td style="width:183px;">Horiba</td>
			<td style="width:119px;">FL3-22-R3</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">Fluorohub TCSPC controller</td>
			<td style="width:183px;">Horiba</td>
			<td style="width:119px;">Fluorohub-B</td>
			<td>TCSPC electronics for ensemble measurements</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">NanoLed 485L</td>
			<td style="width:183px;">Horiba</td>
			<td style="width:119px;">485L</td>
			<td>Blue diode laser</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">NanoLed 635L</td>
			<td style="width:183px;">Horiba</td>
			<td style="width:119px;">635L</td>
			<td>Red diode laser</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">Olympus IX73 Microscope</td>
			<td style="width:183px;">Olympus</td>
			<td style="width:119px;">IX73P2F</td>
			<td>Microscope frame</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">PMA 40 Hybrid Detector</td>
			<td style="width:183px;">PicoQuant GmbH</td>
			<td style="width:119px;">932200, PMA 40</td>
			<td>Optimized for green detection</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">PMA 50 Hybrid Detector</td>
			<td style="width:183px;">PicoQuant GmbH</td>
			<td style="width:119px;">932201, PMA 50</td>
			<td>Optimized for ed shifter sensitivity</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">485nm laser</td>
			<td style="width:183px;">PicoQuant GmbH</td>
			<td style="width:119px;">LDH-D-C-485</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">640nm laser</td>
			<td style="width:183px;">PicoQuant GmbH</td>
			<td style="width:119px;">LDH-D-C-640</td>
			<td></td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:204px;">Hydraharp 400 and TTTR acqusition software</td>
			<td style="width:183px;">PicoQuant</td>
			<td align="right" style="width:119px;">930021</td>
			<td>Picosecond event timer and Time Correlated Single Photon Coutning Unit, includes TTTR acqusition software</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:204px;">SEPIA II SLM 828 and SEPIA software</td>
			<td style="width:183px;">PicoQuant</td>
			<td align="right" style="width:119px;">910028</td>
			<td>Laser driver for picosecond pulses , includes SEPIA software controller.</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">computer</td>
			<td style="width:183px;">Dell</td>
			<td style="width:119px;">optiplex 7010</td>
			<td>cpu: i7-3770 ram:16GB</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:204px;">FRET Positioning and Screening (FPS) software</td>
			<td style="width:183px;">Heinrich Heine Unviersity</td>
			<td style="width:119px;"></td>
			<td>It include the Accesibel Volume clacualtor available at http://www.mpc.hhu.de/software/fps.html</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:204px;">MFD suite</td>
			<td style="width:183px;">Heinrich Heine Unviersity</td>
			<td style="width:119px;"></td>
			<td>It includes the BIFL software package Paris; Margarita for visualization of the multiparameter hisotrams, and Probability Distribution Analysis software availabel at http://www.mpc.hhu.de/software/software-package.html</td>
		</tr>
	</tbody>
</table>

high precision fret at single-molecule level for biomolecule structure determination

マルチパラメータ蛍光検出（MFD）モードにおいて、単分子レベルでのフォルスター共鳴エネルギー移動（FRET）を用いて高精度の眼間距離測定を行う方法に関するプロトコールをここに示す。 MFDは、光物理学的および実験的アーチファクトを減少させるために蛍光のすべての「次元」の使用を最大にし、剛性生体分子において〜1Åまでの精度での粒子間距離の測定を可能にする。この方法を用いて、N-メチル-D-アスパラギン酸（NMDA）受容体のリガンド結合ドメインの3つの構造状態を同定し、リガンド結合時の受容体の活性化を説明した。既知の結晶学的構造を実験測定と比較すると、より動的な生体分子については3Å未満で合意した。生体分子の全次元をカバーする一組の距離制限を集めることにより、動的生体分子の構造モデルを提供することが可能になるes。

MFDセットアップ（レーザーライン：60μWで485nm、23μWで640nm、セクション5.1）を用いた典型的なsmFRET実験では、蛍光サンプルを低ピコモル濃度（10 -12 M = 1pM）に希釈し、サブナノ秒のレーザーパルスが励起分子を介して自由に拡散する標識分子を励起する共焦点顕微鏡で行う。典型的な共焦点体積は&lt;4フェムトリットル（fL）である。このような低濃度では、?...

Watch this Scientific Journal Video about High Precision FRET at Single-molecule Level for Biomolecule Structure Determination at JoVE.com

High Precision FRET at Single-molecule Level for Biomolecule Structure Determination

単一分子レベルでの高精度FRET実験のプロトコールをここに示します。さらに、この方法論は、N-メチル-D-アスパラギン酸（NMDA）受容体のリガンド結合ドメインにおける3つの構造状態を同定するために使用することができる。正確な距離を決定することは、FRET実験に基づく構造モデルを構築するための第一歩です。

生体分子構造決定のための単分子レベルでの高精度FRET

A protocol on how to perform high-precision interdye distance measurements using F&#246;rster resonance energy transfer (FRET) at the single-molecule ...

The overall goal of this protocol is to perform high precision inter-dye distance measurements using multi-parameter fluorescence detection of F

high-precision-fret-at-single-molecule-level-for-biomolecule

Research

JoVE Journal

Biochemistry

10.6K ビュー.  Clemson University. The overall goal of this protocol is to perform high precision inter-dye distance measurements using multi-parameter fluorescence detection of F

ビデオ: High Precision FRET at Single-molecule Level for Biomolecule Structure Determination

Structural Information from Single-molecule FRET Experiments Using the Fast Nano-positioning System

Single-molecule F&#246;rster Resonance Energy Transfer (smFRET) can be used to obtain structural information on biomolecular complexes in real-time. Thereby, multiple smFRET measurements are used to localize an unknown dye position inside a protein complex by means of trilateration. In order to obtain quantitative information, the Nano-Positioning System (NPS) uses probabilistic data analysis to combine structural information from X-ray crystallography with single-molecule fluorescence data to calculate not only the most probable position but the complete three-dimensional probability distribution, termed posterior, which indicates the experimental uncertainty. The concept was generalized for the analysis of smFRET networks containing numerous dye molecules. The latest version of NPS, Fast-NPS, features a new algorithm using Bayesian parameter estimation based on Markov Chain Monte Carlo sampling and parallel tempering that allows for the analysis of large smFRET networks in a comparably short time. Moreover, Fast-NPS allows the calculation of the posterior by choosing one of five different models for each dye, that account for the different spatial and orientational behavior exhibited by the dye molecules due to their local environment.
Here we present a detailed protocol for obtaining smFRET data and applying the Fast-NPS. We provide detailed instructions for the acquisition of the three input parameters of Fast-NPS: the smFRET values, as well as the quantum yield and anisotropy of the dye molecules. Recently, the NPS has been used to elucidate the architecture of an archaeal open promotor complex. This data is used to demonstrate the influence of the five different dye models on the posterior distribution.

We present the setup and experimental procedure to obtain smFRET data from large donor-acceptor networks with a TIRF microscope. The step-by-step analysis of these measurements with the Bayesian inference software Fast-NPS yields high-resolved structural information via the application of adapted dye models.

ファストナノ位置決めシステムを用いた単一分子FRET実験から構造情報

Single-molecule F&#246;rster Resonance Energy Transfer (smFRET) can be used to obtain structural information on biomolecular complexes in real-time. ...

生化学

Single-molecule Manipulation of G-quadruplexes by Magnetic Tweezers

Non-canonical nucleic acid secondary structure G-quadruplexes (G4) are involved in diverse cellular processes, such as DNA replication, transcription, RNA processing, and telomere elongation. During these processes, various proteins bind and resolve G4 structures to perform their function. As the function of G4 often depends on the stability of its folded structure, it is important to investigate how G4 binding proteins regulate the stability of G4. This work presents a method to manipulate single G4 molecules using magnetic tweezers, which enables studies of the regulation of G4 binding proteins on a single G4 molecule in real time. In general, this method is suitable for a wide scope of applications in studies for proteins/ligands interactions and regulations on various DNA or RNA secondary structures.

A single-molecule magnetic tweezers platform to manipulate G-quadruplexes is reported, which allows for the study of G4 stability and regulation by various proteins.

磁気ピンセットで G quadruplexes の単一分子マニピュレーション

Non-canonical nucleic acid secondary structure G-quadruplexes (G4) are involved in diverse cellular processes, such as DNA replication, transcription, RNA ...

High Throughput, Absolute Determination of the Content of a Selected Protein at Tissue Levels Using Quantitative Dot Blot Analysis (QDB)

Lacking a convenient, quantitative, high throughput immunoblot method for absolute determination of the content of a specific protein at cellular and tissue level significantly hampers the progress in proteomic research. Results derived from currently available immunoblot techniques are also relative, preventing any efforts to combine independent studies with a large-scale analysis of protein samples. In this study, we demonstrate the process of quantitative dot blot analysis (QDB) to achieve absolute quantification in a high throughput format. Using a commercially available protein standard, we are able to determine the absolute content of capping actin protein, gelsolin-like (CAPG) in protein samples prepared from three different mouse tissues (kidney, spleen, and prostate) together with a detailed explanation of the experimental details. We propose the QDB analysis as a convenient, quantitative, high throughput immunoblot method of absolute quantification of individual proteins at the cellular and tissue level. This method will substantially aid biomarker validation and pathway verification in various areas of biological and biomedical research.

High Throughput, Absolute Determination of the Content of a Selected Protein at Tissue Levels Using Quantitative Dot Blot Analysis QDB

Here we demonstrate a detailed process of quantitative dot blot analysis (QDB) by determining the absolute content of a targeted protein, capping actin protein, gelsolin-like (CAPG), in three different mouse tissues. We demonstrate a high throughput, convenient, quantitative immunoblot technique for biomarker validation at the cellular and tissue level.

高スループット、定量的なドットを使用して組織レベルで選択されたタンパク質の含有量の絶対測定のしみの分析 (おっ)

Lacking a convenient, quantitative, high throughput immunoblot method for absolute determination of the content of a specific protein at cellular and ...

Using Three-color Single-molecule FRET to Study the Correlation of Protein Interactions

Single-molecule F&#246;rster resonance energy transfer (smFRET) has become a widely used biophysical technique to study the dynamics of biomolecules. For many molecular machines in a cell proteins have to act together&#160;with interaction partners in a functional cycle to fulfill their task. The extension of two-color to multi-color smFRET makes it possible to simultaneously probe more than one interaction or conformational change. This not only adds a new dimension to smFRET experiments but it also offers the unique possibility to directly study the sequence of events and to detect correlated interactions when using an immobilized sample and a total internal reflection fluorescence microscope (TIRFM). Therefore, multi-color smFRET is a versatile tool for studying biomolecular complexes in a quantitative manner and in a previously unachievable detail.
Here, we demonstrate how to overcome the special challenges of multi-color smFRET experiments on proteins. We present detailed protocols for obtaining the data and for extracting kinetic information. This includes trace selection criteria, state separation, and the recovery of state trajectories from the noisy data using a 3D ensemble Hidden Markov Model (HMM). Compared to other methods, the kinetic information is not recovered from dwell time histograms but directly from the HMM. The maximum likelihood framework allows us to critically evaluate the kinetic model and to provide meaningful uncertainties for the rates.
By applying our method to the heat shock protein 90 (Hsp90), we are able to disentangle the nucleotide binding and the global conformational changes of the protein. This allows us to directly observe the cooperativity between the two nucleotide binding pockets of the Hsp90 dimer.

Here, we present a protocol to obtain three-color smFRET data and its analysis with a 3D ensemble Hidden Markov Model. With this approach, scientists can extract kinetic information from complex protein systems, including cooperativity or correlated interactions.

3色 1 分子 FRET を使用して蛋白質の相互作用の相関関係を研究するには

Single-molecule F&#246;rster resonance energy transfer (smFRET) has become a widely used biophysical technique to study the dynamics of biomolecules. For ...

Proteome-wide Quantification of Labeling Homogeneity at the Single Molecule Level

Cell proteomes are often characterized using electrophoresis assays, where all species of proteins in the cells are non-specifically labeled with a fluorescent dye and are spotted by a photodetector following their separation. Single molecule fluorescence imaging can provide ultrasensitive protein detection with its ability for visualizing individual fluorescent molecules. However, the application of this powerful imaging method to electrophoresis assays is hampered by the lack of ways to characterize the homogeneity of fluorescent labeling of each protein species across the proteome. Here, we developed a method to evaluate the labeling homogeneity across the proteome based on a single molecule fluorescence imaging assay. In our measurement using a HeLa cell sample, the proportion of proteins labeled with at least one dye, which we termed &#8216;labeling occupancy&#8217; (LO), was determined to range from 50% to 90%, supporting the high potential of the application of single molecule imaging to sensitive and precise proteome analysis.

Here, we present a protocol to assess the labeling homogeneity for each protein species in a complex protein sample at the single molecule level.

プロテオーム的分類の単一分子レベルでの均一性の定量化

Cell proteomes are often characterized using electrophoresis assays, where all species of proteins in the cells are non-specifically labeled with a ...

Single-Molecule Dwell-Time Analysis of Restriction Endonuclease-Mediated DNA Cleavage

This novel total internal reflection fluorescence microscopy-based assay facilitates the simultaneous measurement of the length of the catalytic cycle for hundreds of individual restriction endonuclease (REase) molecules in one experiment. This assay does not require protein labeling and can be carried out with a single imaging channel. In addition, the results of multiple individual experiments can be pooled to generate well-populated dwell-time distributions. Analysis of the resulting dwell-time distributions can help elucidate the DNA cleavage mechanism by revealing the presence of kinetic steps that cannot be directly observed. Example data collected using this assay with the well-studied REase, EcoRV - a dimeric Type IIP restriction endonuclease that cleaves the palindromic sequence GAT&#8595;ATC (where &#8595; is the cut site) - are in agreement with prior studies. These results suggest that there are at least three steps in the pathway to DNA cleavage that is initiated by introducing magnesium after EcoRV binds DNA in its absence, with an average rate of 0.17 s-1 for each step.

Using quantum-dot-labeled DNA and total internal reflection fluorescence microscopy, we can investigate the reaction mechanism of restriction endonucleases while using unlabeled protein. This single-molecule technique allows for massively multiplexed observation of individual protein-DNA interactions, and data can be pooled to generate well-populated dwell-time distributions.

制限エンドヌクレアーゼ媒介性DNA切断の1分子滞留時間解析

This novel total internal reflection fluorescence microscopy-based assay facilitates the simultaneous measurement of the length of the catalytic cycle for ...

Making Precise and Accurate Single-Molecule FRET Measurements using the Open-Source smfBox

The smfBox is a recently developed cost-effective, open-source instrument for single-molecule F&#246;rster Resonance Energy Transfer (smFRET), which makes measurements on freely diffusing biomolecules more accessible. This overview includes a step-by-step protocol for using this instrument to make measurements of precise FRET efficiencies in duplex DNA samples, including details of the sample preparation, instrument setup and alignment, data acquisition, and complete analysis routines. The presented approach, which includes how to determine all the correction factors required for accurate FRET-derived distance measurements, builds on a large body of recent collaborative work across the FRET Community, which aims to establish standard protocols and analysis approaches. This protocol, which is easily adaptable to a range of biomolecular systems, adds to the growing efforts in democratising smFRET for the wider scientific community.

This article provides step-by-step instructions for making fully-corrected accurate FRET measurements on individual, freely diffusing biomolecules using the open-source, inexpensive smfBox, from switch on, through alignment and focusing, to data collection and analysis.

オープンソースsmfBoxを使用して、正確で正確な単一分子フレット測定を行う

The smfBox is a recently developed cost-effective, open-source instrument for single-molecule F&#246;rster Resonance Energy Transfer (smFRET), which makes ...

Single-Molecule Imaging of EWS-FLI1 Condensates Assembling on DNA

The fusion genes resulting from chromosomal translocation have been found in many solid tumors or leukemia. EWS-FLI1, which belongs to the FUS/EWS/TAF15 (FET) family of fusion oncoproteins, is one of the most frequently involved fusion genes in Ewing sarcoma. These FET family fusion proteins typically harbor a low-complexity domain (LCD) of FET protein at their N-terminus and a DNA-binding domain (DBD) at their C-terminus. EWS-FLI1 has been confirmed to form biomolecular condensates at its target binding loci due to LCD-LCD and LCD-DBD interactions, and these condensates can recruit RNA polymerase II to enhance gene transcription. However, how these condensates are assembled at their binding sites remains unclear. Recently, a single-molecule biophysics method-DNA Curtains-was applied to visualize these assembling processes of EWS-FLI1 condensates. Here, the detailed experimental protocol and data analysis approaches are discussed for the application of DNA Curtains in studying the biomolecular condensates assembling on target DNA.

Here, we describe the use of the single-molecule imaging method, DNA Curtains, to study the biophysical mechanism of EWS-FLI1 condensates assembling on DNA.

DNA上に集合したEWS-FLI1凝縮体の1分子イメージング

The fusion genes resulting from chromosomal translocation have been found in many solid tumors or leukemia. EWS-FLI1, which belongs to the FUS/EWS/TAF15 ...

The Extraction of Liver Glycogen Molecules for Glycogen Structure Determination

Liver glycogen is a hyperbranched glucose polymer that is involved in the maintenance of blood sugar levels in animals. The properties of glycogen are influenced by its structure. Hence, a suitable extraction method that isolates representative samples of glycogen is crucial to the study of this macromolecule. Compared to other extraction methods, a method that employs a sucrose density gradient centrifugation step can minimize molecular damage. Based on this method, a recent publication describes how the density of the sucrose solution used during centrifugation was varied (30%, 50%, 72.5%) to find the most suitable concentration to extract glycogen particles of a wide variety of sizes, limiting the loss of smaller particles. A 10 min boiling step was introduced to test its ability to denature glycogen degrading enzymes, thus preserving glycogen. The lowest sucrose concentration (30%) and the addition of the boiling step were shown to extract the most representative samples of glycogen.

An optimal sucrose concentration was determined for the extraction of liver glycogen using sucrose density gradient centrifugation. The addition of a 10 min boiling step to inhibit glycogen-degrading enzymes proved beneficial.

グリコーゲン構造決定のための肝臓グリコーゲン分子の抽出

Liver glycogen is a hyperbranched glucose polymer that is involved in the maintenance of blood sugar levels in animals. The properties of glycogen are ...

Visualizing the Conformational Dynamics of Membrane Receptors Using Single-Molecule FRET

The ability of cells to respond to external signals is essential for cellular development, growth, and survival. To respond to a signal from the environment, a cell must be able to recognize and process it. This task mainly relies on the function of membrane receptors, whose role is to convert signals into the biochemical language of the cell. G protein-coupled receptors (GPCRs) constitute the largest family of membrane receptor proteins in humans. Among GPCRs, metabotropic glutamate receptors (mGluRs) are a unique subclass that function as obligate dimers and possess a large extracellular domain that contains the ligand-binding site. Recent advances in structural studies of mGluRs have improved the understanding of their activation process. However, the propagation of large-scale conformational changes through mGluRs during activation and modulation is poorly understood. Single-molecule fluorescence resonance energy transfer (smFRET) is a powerful technique to visualize and quantify the structural dynamics of biomolecules at the single-protein level. To visualize the dynamic process of mGluR2 activation, fluorescent conformational sensors based on unnatural amino acid (UAA) incorporation were developed that allowed site-specific protein labeling without perturbation of the native structure of receptors. The protocol described here explains how to perform these experiments, including the novel UAA labeling approach, sample preparation, and smFRET data acquisition and analysis. These strategies are generalizable and can be extended to investigate the conformational dynamics of a variety of membrane proteins.

This study presents a detailed procedure to perform single-molecule fluorescence resonance energy transfer (smFRET) experiments on G protein-coupled receptors (GPCRs) using site-specific labeling via unnatural amino acid (UAA) incorporation. The protocol provides a step-by-step guide for smFRET sample preparation, experiments, and data analysis.