Decellularization of the Murine Cardiopulmonary Complex

Podsumowanie

This protocol aims to decellularize the heart and lungs of mice. The resulting extracellular matrix (ECM) scaffolds can be immunostained and imaged to map the location and topology of their components.

Streszczenie

We present here a decellularization protocol for mouse heart and lungs. It produces structural ECM scaffolds that can be used to analyze ECM topology and composition. It is based on a microsurgical procedure designed to catheterize the trachea and aorta of a euthanized mouse to perfuse the heart and lungs with decellularizing agents. The decellularized cardiopulmonary complex can subsequently be immunostained to reveal the location of structural ECM proteins. The whole procedure can be completed in 4 days.

The ECM scaffolds resulting from this protocol are free of dimensional distortions. The absence of cells enables structural examination of ECM structures down to submicron resolution in 3D. This protocol can be applied to healthy and diseased tissue from mice as young as 4-weeks old, including mouse models of fibrosis and cancer, opening the way to determine ECM remodeling associated with cardiopulmonary disease.

Wprowadzenie

The ECM is a three-dimensional network made of proteins and glycans that accommodates all cells in a multicellular organism, giving organs their shape and regulating cell behavior throughout life¹. From egg fertilization onwards, cells build and remodel the ECM, and are in turn strictly controlled by it. The purpose of this protocol is to open a way to analyze and map mouse ECM, as mice are the most used model organism in mammalian pathophysiology.

The development of this method was driven by the need to characterize and isolate metastasis-associated native ECM². As tumors lack proper anatomical vascularization and mice are relatively small organisms, microsurgical procedures were designed to retrogradely catheterize the aorta, while isolating the circulation of the major vessel leading to a tumor (e.g., the pulmonary veins), thus focusing reagent flow and allowing tumor decellularization. This method produces ECM scaffolds with a conserved structure² that can be immunostained and imaged, allowing ECM structure mapping in submicron detail. To carry out this protocol, it is necessary to acquire surgical and microsurgical skills (dissection, microsuturing and catheterization) that may represent a potential limitation to its use. To our knowledge, this method represents the state-of-the-art for native ECM structure imaging analysis^2,3.

Protokół

All procedures included here have been reviewed and approved by the ethical committee regulating experimental medicine in the University of Copenhagen and agree with Danish and European legislation. To demonstrate this protocol, we have used female BALB/cJ mice of 8-12 weeks of age and an MMTV-PyMT female mouse of 11 weeks of age.

NOTE: Avoiding bacterial contamination of the decellularized ECM scaffold gives the best imaging outcome and allows long-term sample storage. It is therefore important to keep all the steps sterile. As such, all instruments and surgical material, including suture, micro-suture, solutions, tubing, Luer connectors and catheters, must be sterile. Surfaces, including a polystyrene tray, must be disinfected with 70% ethanol, and the perfusion should preferably be carried out under a laminar flow hood. All procedures take place at room temperature unless otherwise indicated.

1. Post-mortem microsurgery

1. Euthanize the mouse using a CO₂ chamber.
   1. Place mouse into a 4 L chamber, and begin to fill with 100% CO₂, starting at 0.2 L/min for 2 min, increasing until reaching a flow of 0.8 L/min after 3 min. The mouse should fall unconscious during the first 2 min, and then respiration should cease (usually around 5 min, but flow can be maintained as necessary). Confirm death prior to proceeding to the next step.
2. Shave the thorax, abdomen and back of the mouse with the hair clipper and disinfect with 70% ethanol. Shaving greatly reduces the number of artifacts due to the presence of hair either on samples for imaging or biochemical analysis.
3. Pin the mouse to a polystyrene tray, extending its fore- and hindlimbs, as well as its head and tail. Place it under the microsurgery microscope.
4. Using a Mayo straight pattern scissors establish surgical access with a cutaneous incision running from the submandibular region to the lower abdomen and dissect subcutaneously to expose the thoracic wall and peritoneum.
5. Using microsurgical scissors, cut the pectoralis major and pectoralis minor muscles along the sixth intercostal space on both sides of the thoracic wall.
6. Using straight-pattern scissors, cut the sternum along the previous incisions, and then complete a sternotomy by cutting the sternum along its long axis, then elevate and pin both sides of the thoracic wall to expose the cardiopulmonary complex.
7. Using round-tipped micro-forceps (or Dumont micro-forceps), excise the thymus and surrounding adipose tissue by delicately pulling them off their attachments. This will reveal the major vessels.
8. Using the cautery, cauterize the descending cava vein and, using straight pattern scissors, cut the esophagus.
9. Using sharp micro-forceps, separate the brachiocephalic veins and the brachiocephalic, left common carotid and left subclavian arteries from the underlying tissue to facilitate ligation and cauterization.
10. Using micro-needle holder, sharp micro-forceps and 9-0 suture place stitches above the emergence of the brachiocephalic, left common carotid and left subclavian arteries.
11. Cauterize the brachiocephalic veins.
12. Separate the submandibular salivary glands along the midline to expose the neck muscles and the trachea. Separate the muscles to expose the cricothyroid ligament. Using micro-scissors, open an entrance by sectioning the ligament.
13. Introduce a 27 G catheter in the trachea and delicately push until the trachea branches into the bronchi (i.e., until resistance to the catheter is met, then retreat 3 mm). Be careful not to disrupt the bronchi. Using a 6-0 suture, place 3 stitches around the trachea to secure the catheter.
14. Section the mouse at the height of the 12th thoracic vertebra. The descending aorta runs anteriorly to the spine and should be sectioned here along with the spine. Set the lower half apart.
15. Retrogradely catheterize the aorta and push the catheter until it reaches the aortic arc. Using 9-0 suture, place 4 stitches around the aorta, beginning 5 mm below the catheter tip.

2. Decellularization

1. Connect the mouse to a pump system using silicone tubing and Luer connectors. Perfuse with deionized water at 200 µL/min for 15 min. Maintain this flow rate during decellularization.
2. Change the perfusion agent to 0.5% sodium deoxycholate (DOC) diluted in deionized water and perfuse overnight.
3. Change the perfusion agent to 0.1% sodium dodecyl sulphate (SDS) diluted in deionized water and perfuse for 8 hours.
4. Perfuse with deionized water overnight to wash away SDS and DOC for 24 h.
5. Resect the decellularized heart and lungs by sectioning its attachments to the thorax using a curved scissors and store in a sterile cryo-tube with deionized water with 1% (v/v) penicillin-streptomycin and 0.3 µM sodium azide at 4 °C. ECM scaffolds can be stored for at least for 12 weeks¹. If the scaffold will be used for biochemical analysis (e.g., mass spectrometry), snap freeze in liquid nitrogen.

3. Immunostaining

1. Plan the imaging: determine primary antibody (or antibodies) and the combination of fluorescently conjugated secondary antibodies to match each other and to fit the laser lines of the fluorescence microscope.
2. Block the sample by immersing it in a cryotube containing 6% (v/v) donkey serum - 3% (w/v) bovine serum albumin (BSA) overnight.
3. Incubate with primary antibody (or antibodies) in 3% donkey serum in PBS for 24 h.
4. Wash 5 times for 1 h each time in 0.05% tween 20 in PBS (PBST).
5. Incubate the sample with fluorescently conjugated secondary antibody (or antibodies) in 3% donkey serum in PBS for 24 h.
6. Wash 5 times for 1 hour in 0.05% (PBST). Wait 1 h between each wash.
7. Add deionized water and store at 4 °C away from direct light. At this point, the scaffold is ready to image.

4. Imaging

1. Place the sample in a glass-bottomed dish and humidify it with two droplets of storing solution (PBS or deionized water).
2. Prepare the objective. We recommend using a water immersion objective.
3. Inspect the sample using fluorescence light.
4. Switch to computer control. Turn on lasers and adjust laser intensity, pinhole aperture, detectors wavelengths, gain, resolution and zoom. Set the number and step size for z-stack and begin acquisition. We recommend using multiphoton laser excitation to increase tissue penetration and to minimize scattering of light, bleaching and tissue damage.

5. Hematoxylin-eosin staining

1. Excise 1 lung lobe from a euthanized mouse.
2. Place in a 10 mm x 10 mm x 5 mm cryomold and cover it with approximately 500 µL of OCT compound.
3. Freeze on dry ice (-70 °C) and maintain the sample at that temperature.
4. Excise one decellularized lung lobe from a processed mouse according to step 2.5.
5. Place in a cryomold with the largest surface area down and cover it with OCT compound as specified in step 5.2.
6. Freeze on dry ice (-70°C) and maintain the sample at that temperature until otherwise required. The sample can be stored for at least 12 weeks.
7. Section frozen tissue blocks at -20 °C in a cryostat with 5 µm thickness and place sections on adhesive glass slides and store at -80 °C.
8. Take slides to room temperature until air dried (approximately 20 min).
9. Shortly immerse in PBS and fix by immersing the slides in 4% paraformaldehyde in PBS for 15 min. Wash once in PBS for 5 min, then twice in distilled water for 5 min.
10. Immerse in Mayer's hematoxylin solution for 10 min. This time can be optimized according to tissue source and stain preparation.
11. Wash in a Coplin jar under running distilled water for 10 min.
12. Immerse in eosin solution for 7 min. This time can be optimized according to tissue source and stain preparation.
13. Dip in 50% ethanol to remove excess Eosin and dehydrate by shortly dipping in 70% ethanol, and in 96% and 100% ethanol for 30 seconds. Dip in xylene several times.
14. Apply few drops of DPX mounting medium and place a glass coverslip.
15. Leave slides to dry overnight under a chemical hood.
16. Scan slides in a slide scanner.

Wyniki

Cardiopulmonary decellularization
After successfully completing the protocol, the heart and lungs, as well as annex tissue such as the aortic arc, will be free of cells. Decellularization can be validated by hematoxylin-eosin staining (Figure 1) of the ECM scaffolds showing removal of the nuclei comparing to the native tissue. These scaffolds retain the dimensions of fresh organs and its insoluble ECM structure is intact

Dyskusje

Decellularization techniques based on tissue agitation alter ECM structure, making them unsuitable for ECM structure analysis⁴. Perfusion decellularization, using an anatomical route such as the aorta of the trachea, allows to reach the capillary bed, or terminal alveoli, and facilitates the delivery of decellularizing agents throughout the organ. The use of zwitterionic, anionic and non-ionic detergents to decellularize tissue is reported^4,5

Materiały

Name	Company	Catalog Number	Comments
MICROSURGERY
6-0 suture, triangular section needle (Vicryl)	Ethicon	6301124
9-0 micro-suture (Safil)	B Braun	G1048611
Adson forceps	Fine Science Tools	11006-12
Adson forceps with teeth	Fine Science Tools	11027-12
Castroviejo microneedle holder	Fine Science Tools	no. 12061-01
CO2 ventilation chamber for mouse euthanasia
Deionized water (Milli-Q IQ 7000, Ultrapure lab water system)	Merck	ZIQ7000T0
Disposable polystyrene tray (~30 × 50 cm)
Dissection microscope (Greenough, with two-armed gooseneck)	Leica	S6 D
Double-ended microspatula	Fine Science Tools	10091-12
Dumont microforceps (two)	Fine Science Tools	11252-20
Dumont microforceps with 45° tips (two)	Fine Science Tools	11251-35
Hair clippers	Oster	76998-320-051
Halsey needle holder (with tungsten carbide jaws)	Fine Science Tools	12500-12
Intravenous 24-gauge catheter (Insyte)	BD	381512
Intravenous 26-gauge catheter (Terumo)	Surflo-W	SR+DM2619WX
Mayo scissors (tough cut, straight)	Fine Science Tools	14110-15
Microforceps with ringed tips (two)	Aesculap	FM571R
Micro-spring scissors (Vannas, curved)	Fine Science Tools	15001-08
Minicutter	KLS Martin	80-008-03-04
Molt Periostotome	Aesculap	D0543R
Needles (27 gauge; Microlance)	BD	21018
Paper towel (sterile) or surgical napkin
Serrated scissors (CeramaCut, straight)	Fine Science Tools	14958-09
Spatula (Freer-Yasargil)	Aesculap	OL166R
Syringes (1 mL; Plastipak)	BD	3021001
Syringes (10 mL; Plastipak)	BD	3021110
Tendon scissors (Walton)	Fine Science Tools	14077-09
IMMUNOSTAINING
Alexa Fluor 488 donkey anti-guinea pig IgG	Thermo Fisher Scientific	A-11055
Alexa Fluor 594 donkey anti-rabbit IgG	Life Technologies	A11037
BSA(albumin bovine fraction V, standard grade, lyophilized)	Serva	11930.03
Collagen IV polyclonal antibody (RRID: AB_2276457)	Millipore	AB756P	Host: rabbit
PBS (pH 7.4, 10×, Gibco)	Thermo Fisher Scientific	70011044	Host: goat
Periostin polyclonal antibody (a kind gift from Manuel Koch. RRID:AB2801621)			Host: guinea pig
Scalpel disposable with blade no.11 (pcs. 10)	VWR	233-5364)
Serum (normal donkey serum)	Jackson ImmunoResearch	017-000-121
Tween 20	Sigma-Aldrich	P9416-50ML
IMAGING
Detectors (hybrid detector (Leica, HyD S model) and photomultiplier tubes (PMTs; )	Leica
Fluorescence light source	Leica	EL6000
Microscope (inverted multiphoton microscope)	Leica	SP5-X MP
Objective (lambda blue, 20×, 0.70 numerical aperture (NA) IMM UV)	Leica	HCX PL APO
Two-photon Ti–sapphire laser (Spectra-physics, Mai Tai DeepSee model)
White-light laser (WLL)	Leica
DECELLULARIZATION
70% Ethanol (absolute alcohol 99.9%); absolute alcohol must be adjusted to 70% (vol/vol) using deionized water	Plum	1680766
Deionized water (Milli-Q IQ 7000, Ultrapure lab water system)	Merck	ZIQ7000T0
Luer-to-tubing male fittings (1/8 inch)	World Precision Instruments	13158-100
PBS (pH 7.4, 10×, Gibco)	Thermo Fisher Scientific	70011044
Penicillin-streptomycin	Gibco	15140122
Peristaltic pump (with 12 channels)	Ole Dich	110AC(R)20G75
Silicone tubing (with 2-mm i.d. and 4 mm o.d.)	Ole Dich	31399
Sodium Azide	Sigma-Aldrich	08591-1ML-F
Sodium deoxycholate (DOC)	Sigma-Aldrich	D6750-100G
Sodium Dodecyl Sulphate	Sigma-Aldrich	L3771-500G
H&E STAINING
4% PFA	Fisher Scientific	15434389
96% Ethanol	Plum	201446-5L
Absolute ethanol	Plum	201152-1L
Coverslips (24x50mm; 1000 pcs)	Hounisen	422.245
Cryomolds Intermediate (15 x 15 x 5 mm; 100 pcs)	Tissue-Tek	4566
Cryostat	Leica	CM3050S
DPX mounting medium	Hounisen	1001.0025
Eosin Y solution alcoholic 0.5%	Sigma	1024390500
Feather microtome blade stainless steel,C35 (50 pcs)	Pfm medical	207500003
Fisherbrand Superfrost Plus slides (25 x 75 mm; 144 pcs)	Thermofisher	6319483
Mayers hematoxylin	Sigma	MHS32-1L
OCT compound	VWR	361603E
Slide scanner (Nanozoomer)	Hamamatsu Photonics
Xylene	Sigma	534056-4L