The Chick Chorioallantoic Membrane (CAM) Model as a Tool to Study Ovarian Tissue Transplantation

Podsumowanie

Here, we describe a protocol for developing a chick chorioallantoic membrane (CAM) xenografting model for human ovarian tissue and demonstrate the effectiveness of the technique, the graft revascularization time frame, and the tissue viability across a 6 day grafting period.

Streszczenie

Ovarian tissue cryopreservation and transplantation is an effective strategy for preserving fertility but has one major drawback, namely massive follicle loss occurring shortly after reimplantation due to abnormal follicle activation and death. Rodents are benchmark models for investigating follicle activation, but the cost, time, and ethical considerations are becoming increasingly prohibitive, thus driving the development of alternatives. The chick chorioallantoic membrane (CAM) model is particularly attractive, being inexpensive and maintaining natural immunodeficiency up to day 17 postfertilization, making it ideal to study short-term xenografting of human ovarian tissue. The CAM is also highly vascularized and has been widely used as a model to explore angiogenesis. This gives it a remarkable advantage over in vitro models and allows the investigation of mechanisms affecting the early post-grafting follicle loss process. The protocol outlined herein aims to describe the development of a CAM xenografting model for human ovarian tissue, with specific insights into the effectiveness of the technique, the graft revascularization time frame, and the tissue viability across a 6 day grafting period.

Wprowadzenie

The demand for fertility preservation for oncological and benign indications, as well as social reasons, has dramatically increased over recent decades. However, various treatments used to cure malignant and non-malignant diseases are highly toxic to the gonads and can result in iatrogenic premature ovarian insufficiency, ultimately leading to infertility¹. Established techniques for fertility preservation include embryo cryopreservation, immature or mature oocyte vitrification, and ovarian tissue cryopreservation^2,3,4. Ovarian tissue freezing is the only available option for preserving fertility in prepubertal girls or women who require immediate cancer therapy. The restoration of endocrine function following ovarian tissue transplantation occurs in over 95% of subjects, with live birth rates ranging from 18% to 42%^5,6,7,8,9.

Although the transplantation of frozen-thawed ovarian tissue has proven successful, there is still room for improvement. Indeed, as ovarian cortical fragments are transplanted without vascular anastomosis, they experience a period of hypoxia during which graft revascularization takes place^10,11,12. The vast majority of studies investigating human ovarian tissue transplantation have used a xenografting model, in which ovarian tissue is transplanted to immunodeficient mice. The complete revascularization of the xenografts takes around 10 days, with both the host and graft vessels contributing to the formation of functional vessels^12,13,14. Around 50%-90% of the follicle reserve is lost during this hypoxic window before the completion of graft revascularization^10,15,16. It has been strongly suggested that this massive follicle loss occurs through both direct follicle death, as demonstrated by a decrease in the absolute follicle numbers left after grafting, and the activation of primordial follicle growth, as indicated by changes in follicle proportions towards increased rates of growing follicles^17,18.

Interestingly, previous research works using various animal ovarian tissues grafted to chick chorioallantoic membrane (CAM), which has a constitution mimicking the typical grafting site of the peritoneum, have reported the inhibition of spontaneous follicle activation, with the primordial follicle reserve staying intact for up to 10 days^19,20,21,22. Our team previously demonstrated that the grafting of frozen-thawed human ovarian tissue to CAM constituted a reliable approach for investigating human ovarian tissue transplantation in its first ischemic stages²³ and recently showed that this grafting method was able to counteract follicle activation²⁴.

The CAM model is especially appealing not only because eggs are much cheaper than mice but also because of the highly vascularized nature of CAM, allowing scrutiny of the association between follicle activation and ovarian graft revascularization. The avian system is, indeed, one of the most common and versatile ways of studying angiogenesis²⁵. Chick embryo development (ED) takes 21 days until hatching, and the CAM is formed within the first 4-5 days through the fusion of the allantois and chorion²⁶. Notably, the chick embryo is a naturally immunodeficient host until day 17 of ED, so xenografting experiments can be performed without any risk of graft rejection^27,28. Moreover, the CAM model approach does not raise any ethical or legal concerns in terms of European law²⁹, making it an attractive alternative to other animal models. With regard to breeding conditions, chick embryos only need an incubator set at 37 °C with a relative air humidity of 40%-60%. These limited experimentation requirements significantly reduce the research costs compared to use of immunodeficient mice.

The protocol presented herein aims to describe the development of a CAM xenografting model for human ovarian tissue and provide specific insights into the effectiveness of the technique, the time frame of graft revascularization, and the tissue viability over a 6 day grafting period. This protocol could be of great interest for investigating the mechanisms behind early post-grafting follicle loss and studying the impact of several agents (growth factors, hormones, etc.) on this phenomenon.

Protokół

The use of human tissue was approved by the Institutional Review Board of the Catholic University of Louvain. The patients gave their written informed consent for the use of their ovarian tissue for research purposes.

1. Ordering day 0 eggs that are highly likely to be embryonated

1. Find a certified laboratory-grade Lohman-selected white Leghorn egg supplier that reports high rates of embryonated eggs, which is primarily dependent on the age of the chicks.

2. Preparing the eggs for incubation

1. Prior to the arrival of the eggs, assemble and equilibrate the egg incubator to 37 °C in 40%-60% relative air humidity. Monitor the temperature and air humidity by inserting a thermometer and hygrometer into the incubator. Ensure the lid of the incubator is equipped with a glass window to allow for checking the internal parameters of the incubator without having to open it (Figure 1).
2. Having received the day 0 eggs from Lohman-selected white Leghorn chicks from a certified laboratory-grade egg supplier, clean the surface of the shells with humidified paper, and dry them immediately.
   NOTE: Since the eggshell membrane is porous, autoclaved water may be used to clean egg surfaces and control humidity within the incubator in order to minimize contamination risks.
3. Label the eggs using a marker (e.g., date and egg number).
4. Incubate the eggs with the pointed end facing down, and rotate them to allow the CAM to develop. Manually rotate the eggs by 180° two to three times per day or use an automatic rotator.
   NOTE: In order to ensure the eggs are indeed being rotated, the eggshell may be marked with an "X" and "O" on the two opposing lateral sides using a pencil or marker. The glass window in the lid of the incubator allows one to check the rotation of the eggs without opening the device.

3. Opening the eggshell on day 3 of ED

NOTE: A rectangular window is made in the eggshell on day 3 of ED.

1. Prepare the laminar flow hood in order to work in sterile conditions. Place the following instruments under the hood, and disinfect them in 70% ethanol (if not already sterilized):
   -Egg rack
   -Egg candler or focal cold light source
   -Marker
   -Sterile straight pin
   -Sterile 19 G needle
   -5 mL sterile syringe
   -Scroll saw blade
   -Sterile forceps
   -Adhesive tape
2. Transfer one egg from the incubator to the egg rack placed under the hood, and turn off the egg rotator.
3. In the dark, identify the air pocket of the egg by placing the egg candler (or focal cold light source) against the eggshell. The air pocket is localized at the blunt end of the egg. Use a marker to pinpoint the center of the air pocket on the eggshell.
4. Turn on the lights. Make a small hole in the eggshell where it is marked by gently rotating a sterile straight pin. A tiny opening of around 1 mm in diameter is usually sufficient.
   NOTE: Be careful not to push the pin all the way through the egg. If this happens, discard the egg.
5. Connect a sterile 19 G needle to a sterile 5 mL syringe.
6. In the dark, locate the yolk sac using the egg candler (or focal cold light source), and puncture the egg through the hole made in step 3.4 with the sterile 19 G needle angled at 45° toward the bottom of the egg; take great care not to disrupt the yolk sac. Aspirate between 1.5-2 mL of albumen to detach the CAM from the shell, and then close the hole with a piece of adhesive tape.
   NOTE: If the yolk sac is disrupted during aspiration, the aspirated liquid in the syringe will be yellow-colored rather than transparent (albumen). If this happens, replace the needle and syringe. If a relatively large amount of egg yolk is sucked up, it may jeopardize the viability of the embryo.
7. Turn on the lights. Place the egg horizontally, and draw a rectangular window measuring 1 cm x 1.5 cm with a marker. Do not make the window larger than the usual width of standard adhesive tape.
8. Hold the egg in one hand, and gently saw the previously drawn window into the eggshell using a scroll saw blade. Ensure that the shell does not crack and do not cut all the way down to the depressed CAM. Blow regularly to remove shell dust and debris.
9. Slide sterile forceps under the rectangular piece of sawed shell, and grasp deftly to remove it cleanly without damaging the CAM. Additionally, discard the white outer shell membrane to be able to see the embryo and its CAM.
   NOTE: If some eggshell dust or debris falls onto the CAM, it may be removed using sterile forceps, being very careful not to tear the CAM.
10. Identify viable embryonated eggs. They are discernible by their clear albumen and the vascular ring around the embryo, where a beating heart may sometimes be detected even at this stage (day 3 of ED). Discard non-fertilized or dead embryos.
11. Place adhesive tape over the newly created window to avoid dehydration. Be sure to fold one end over itself for ease of removal.
12. Put the egg back in the incubator with the opened window facing up and the tape not touching the CAM. Use a folded piece of paper or part of the egg rack to stop the egg from rolling. Make sure the rotating tray is off.
13. Repeat steps 3.2-3.12 to open the remaining eggs.

4. Grafting frozen-thawed human ovarian tissue to the CAM

NOTE: Transplantation to the CAM should ideally be initiated between days 7-10 of ED.

1. Thaw cryopreserved ovarian cortical strips under the laminar flow hood following the protocol described elsewhere³⁰.
2. Cut the cortical strips into three fragments of 4 mm x 2 mm x 1 mm. Use one piece as a non-grafted control and the other two for xenografting for 1 day or 6 days.
   NOTE: If enough tissue is available, work in duplicate.
3. Transfer one egg from the incubator to the egg rack positioned under the hood, with the window facing up.
4. Peel the tape off the window, and ensure that the embryo is viable. At this stage, viable embryos feature extensive vasculature, a clear albumen, a visible heartbeat, and some embryo movement.
5. Prepare the grafting site by gently traumatizing a small area of the CAM by laying a 1 cm² strip of sterile ether-extracted lens paper onto the epithelial surface and removing it immediately.
   NOTE: The CAM is an impenetrable barrier unless the membrane has been traumatized by the removal of the upper peridermal part of the double epithelial layer, leaving the basal layer intact. This technique also enhances the revascularization process by activating wound healing. If the sterile ether-extracted lens paper stays on the CAM too long, the membrane may adhere to the lens paper and tear. If this happens, discard the egg. 
6. Grasp one frozen-thawed ovarian cortical strip (4 mm x 2 mm x 1 mm) with microsurgical forceps, and place it onto the traumatized CAM with the medullary side against the CAM. Graft one tissue piece per egg.
7. Cover the window with adhesive tape, and carefully return the egg to the incubator. Ensure that the eggshell opening sits upright and the egg is secure.
8. Repeat steps 4.1-4.7 for the grafting of all the remaining tissues.
   NOTE: The implants should be checked on each grafting day to assess the embryo viability and monitor changes in the vasculature.

5. Harvesting the grafts

NOTE: Xenografts should be harvested at the latest by day 17 of ED, since the immune system of the embryo becomes mature and competent from day 18.

1. Place the egg on a rack, and enlarge the window in the eggshell to allow for better graft visualization and easier manipulation.
2. Evaluate the graft macroscopically, and pay particular attention to the vascular reaction of the CAM towards the graft. Take digital photographs or videos for the record.
3. Grasp the tissue or the surrounding CAM with forceps, and use scissors or a scalpel to excise the graft from the CAM carefully.
   NOTE: The grafts become covered with a second layer of CAM at around day 3 of grafting and eventually become encapsulated. They may also have moved inside the egg by day 6, making it difficult to retrieve them in some cases.
4. Analyze the excised tissues by any method appropriate for the given experiment. In the present study, tissue pieces were fixed in paraformaldehyde, paraffin-embedded and stained with hematoxylin and eosin following the steps outlined below:
   1. Fix the fragments in 4% paraformaldehyde for 24 h, and embed them in paraffin using an automatic embedding device with the steps mentioned in Table 1.
   2. Leave the paraffin-embedded blocks overnight at 4°C before cutting them into 5 µm thick sections with a microtome.
   3. Spread the tissue sections on a glass slide placed on a hot plate (30 °C), and leave them to dry for 2 h, followed by 24 h in an oven at 37 °C.
   4. Afterwards, stain the slides with hematoxylin and eosin following a protocol described elsewhere³¹. Subsequently, digitize the samples using a slide scanner, and analyze them using an image analysis software.

Wyniki

Chick embryo survival rates
The embryo survival rate from windowing (day 3 of ED) to ovarian tissue grafting (day 7 of ED) was 79% (33/42). Since the percentage of embryonated day 0 eggs is unknown, supernumerary day 0 eggs from Lohman-selected white Leghorn chickens were ordered to ensure sufficient embryonated eggs would be available for grafting. A total of 23 viable day 7 eggs were used for grafting, one of which perished during the first 24 h, resulting in an overall embryo survival rate ...

Dyskusje

The most challenging part of the protocol described here is making the small hole required to aspirate the albumen in order to detach the CAM from the eggshell prior to creating a window. Applying too much pressure can result in overpenetration or may even crack and destroy the egg, causing irrevocable damage to the CAM and its vasculature. To keep mistakes to a minimum during initial attempts to separate the CAM, it is strongly advised to practice making small holes in the eggshell of non-fertilized, grocery-bought eggs...

Materiały

Name	Company	Catalog Number	Comments
Agani hypodermic needle, 19 G	Terumo Europe	AN*1950R1	19 G needle to aspirate albumen
Terumo syringe, 5 mL concentric Luer lock	Terumo Europe	SS*05LE1	5-mL sterile syringe
Caseviewer v2.2	3DHISTECH		Image analysis software
Diethyl ether	Merck Chemicals	603-022-00-4	Sterile ether to traumatize the CAM
Eosin Y aqueous solution 0.5%	Merck	1098441000	Staining solution
Formaldehyde 4% aqueous solution buffered (Formalin 10%)	VWR	97139010	Formaldehyde used for tissue fixation
Fridge	Liebherr	7081260	Fridge at 4 °C used for paraffin-embedding
Heating plate	Schott	SLK2	Hot plate used to dry the slides
Incubator	Thermo Forma Scientific 3111	10365156	Oven used for slide incubation
Leica CLS 150 XE microscope cold light source	Leica	CLS 150 XE	Focal cold light source to candle the eggs
Lens cleaning tissue, grade 541	VWR	111-5003	Tissue to soak in sterile ether to traumatize the CAM
Mayer's hematoxylin	MERCK	1092491000	Staining solution
Methanol	VWR	20847307	Methanol
Microtome	ThermoScientific-MICROM	HM325-2	Microtome
Pannoramic P250 Flash III	3DHISTECH	/	Slide scanner at 20x magnification
Paraformaldehyde	Merck	1,04,00,51,000	Paraffin-embedding solution
Paraplast Plus R	Sigma	P3683-1KG	Paraffin
Petri dish, 60x15 mm, sterile	Greiner	628161	Sterile petri dish
Pin holder	Fine Science Tools	26016-12	Pin holder
Polyhatch	Brinsea	CP01F	Egg incubator with automatic rotator
Scroll saw blade, 132 mm	Sencys	/	Saw blade to create a window in the eggshell
Stainless steel insert pins	Fine Science Tools	26007-02	Straight pin to make a hole in the eggshell
Steril-Helios	Angelantoni Industrie	ST-00275400000	Laminar flow hood
Superfrost Plus bords rodés 90°	VWR	631-9483	Glass slides
Tissue-Tek VIP 6Al	Sakura	60320417-0711 VID6E3-1	Automatic embedding device
Titanium forceps	Fine Science Tools	11602-16	Forceps for eggshell removal and ovarian tissue manipulation
Toluene, pa	VWR	28701364	Paraffin-embedding solution