Establishment of an Ex Vivo Lung Perfusion Rat Model for Translational Insights in Lung Transplantation

Summary

Here, we describe the necessary steps for establishing a rat EVLP model and show the inflammatory profile associated with the perfused lungs. The aim is to propagate knowledge and experiences about the rat EVLP model, enabling the integral understanding of the biological responses associated with that revolutionary technique.

Abstract

Since the establishment of lung transplantation as a therapeutic strategy for advanced lung diseases, the scientific community is faced with the problem of a low number of lungs considered viable for the donation process. In recent decades, however, this scenario has been positively changed, given the development of ex vivo lung perfusion (EVLP) as a strategy for evaluating and reconditioning marginal lungs. The establishment of EVLP in large transplant centers has favored an increase in the number of lung transplants, both by increasing the diagnostic accuracy of lung function and by constituting an effective platform for the reconditioning of lung grafts. In this context, faced with ethical and logistical issues, as well as in the study of immunological factors associated with lung transplantation, the development of rodent EVLP models has become important, given their reliability, the possibility of genetic manipulation, and lower costs. This paper describes a protocol for establishing a rat EVLP model and shows the inflammatory profile associated with the perfused lungs. This will help propagate knowledge about the rat EVLP model, promoting our understanding of the biological responses associated with that revolutionary technique.

Introduction

Lung transplantation has been recognized as a therapeutic strategy for end-stage diseases with improvements in surgical methods and immunosuppression during the last decades. Despite the high demand, the number of acceptable deceased lung donors is lower than for other solid organs, converging to the lower number of lung transplants performed^1,2,3. To address the donor pool shortage, the medical community has expanded the criteria for lung donation, turning organs previously considered nonviable into potential organs for transplantation. However, the extended criteria require different efforts for a better understanding and intervention in view of the possible systemic consequences originating from the donated organ. Ex vivo lung perfusion (EVLP) emerged as a technique that provides normothermic lung preservation, assessment of lung functions, and reconditioning of lungs previously considered unfeasible for the donation process^4,5,6.

Given the growing number of lung transplants since the establishment of EVLP in large transplant centers, lung preservation and repair strategies have been increasingly investigated. In this sense, faced with ethical and logistical issues, as well as in the study of immunological factors associated with lung transplantation, the development of rodent EVLP models has become important, given their reliability, the possibility of genetic manipulation, and lower costs^7,8,9. Here, we describe the necessary steps to establish a rat EVLP model and show the inflammatory profile associated with the perfused lungs.

Protocol

Animal experiments were performed in compliance with the Animal Use Protocol approved by the Animal Care Committee at the University Health Network. Male Lewis rats (255-330 g) were given ad libitum access to food and water. Then, they were maintained in a controlled environment (18-22 °C) with a 12 h day-night cycle. See the Table of Materials for details related to all materials, solutions, and instruments used in this protocol.

1. Initialization of the  ex vivo lung perfusion system

1. Ensure that all transducers are connected to the isolated perfusion organ equipment and the data acquisition system (Figure 1). Then, open the data acquisition software.
2. Before perfusion, fill the EVLP circuit with 150 mL of Steen solution supplemented with 1,000 USP units of sodium heparin, 50 mg of cefazolin, and 50 mg of methylprednisolone.
3. Set the warm water bath to 20 °C. Start circulating warm water to warm up the entire EVLP system.

2. Donor lung procurement procedure

1. Anesthetize the rat with an intraperitoneal injection of ketamine (50 mg/kg) and xylazine (5 mg/kg) or according to local practice. Confirm proper depth of anesthesia by checking the toe pinch reflex.
2. Perform orotracheal intubation (14 G intravenous catheter). After intubation, connect the tracheal tube to the small-animal ventilation system. Ventilate the rat with a tidal volume of 10 mL/kg, rate of 60 breaths/min, inspired oxygen fraction (FiO₂) of 0.5, and positive end expiratory pressure (PEEP) of 2 cmH₂O.
3. Place the rat in the supine position.
4. With the help of appropriate scissors and forceps, enter the peritoneal cavity and carry the incision cranially, performing a median laparotomy and injecting sodium heparin (400 USP units) into the portal vein.
5. Subsequently, enter the thoracic cavity through the xyphoid process. Carry out the sternotomy with the cranial resection of the sternum and cautious radial opening of the diaphragm, so as not to damage the lung.
6. To retrieve the heart and lung block, make an incision in the inferior vena cava (IVC) and along the apex of the left heart.
7. Using micro scissors, perform an anterior incision in the right ventricular outflow tract. Then, insert an 18 G intravenous catheter into the pulmonary trunk and flush the lungs with 20 mL of low potassium dextran (LPD) solution containing 10 µg/mL of prostaglandin E1.
8. Immediately after flushing, clamp the lower third of the trachea at the end of inspiration to preserve the lungs in an inflated state.
9. Harvest the heart and lung block and place it in LPD solution for storage.
   ​NOTE: The lung graft can be stored at temperatures and different intervals of time according to the research purpose. Here, we show representative results of lungs that underwent varying lengths of cold ischemic time (CIT) on ice.

3. Ex vivo lung perfusion procedure

1. Place a 0 silk ligature beneath the main pulmonary artery (PA) and around the ventricles, and pretied to facilitate cannulation.
2. Connect the PA cannula in the inflow line of the EVLP system and start the peristaltic pump with 10% of maintenance flow, allowing the removal of any air in the PA cannula.
3. Place and secure the inflow cannula into the main PA (OD: 2.0 mm/Head Diameter: 2.5 mm), followed by the drainage cannula from the apex of the heart into the left atrium (LA-Head Diameter: 4.0 mm) through the mitral valve for subsequent perfusion. Use forceps to dilate the mitral valve, facilitating the cannulation.
4. Make a small hole in the trachea and insert the tracheal cannula (OD: 2.0 mm/L: 14 mm). Then, connect it to the ventilation line of the system.
5. Connect the LA cannula to the outflow line of the system.
6. NOTE: We set 10% of maintenance flow as the initiation of perfusion. To avoid the insertion of air bubbles in the lungs, ensure the bubble trap is filled.
7. Gradually increase the flow rate perfusion to reach 20% of the cardiac output (CO).
   NOTE: To perfuse both lungs, we used an estimated CO of 75 mL/min for 250 g rats^10,11. The flow rate of perfusion was gradually increased to 1 h to reach the target flow rate according to our clinical EVLP protocol¹². The perfusion parameters are summarized in Table 1¹³.
8. Remove the tracheal clamp 20 min after the initiation of perfusion and start lung ventilation followed by starting the flow of EVLP gas (8% CO₂, 6% O₂, 86% N₂) to maintain inflow perfusate PCO₂ of between 35 and 45 mmHg.
   ​NOTE: The ventilation parameters are summarized in Table 1¹³.

4. Parameters and sample management

1. Every hour during EVLP, record in real time the dynamic lung compliance and pulmonary vascular resistance (PVR).
   NOTE: At 5 min before the physiological assessments, the lungs should be expanded to an inflation pressure.
2. Take perfusate samples from the sample port every hour and flash freeze in liquid nitrogen for further analyses.
   NOTE: In addition, we perform a recruitment maneuver (up to 20 cmH₂O) 5 min before assessment, after which we take perfusates for blood gas analyses to measure pH, PCO₂, PO₂, electrolytes, glucose, and lactate.
3. Stop perfusion and clamp the trachea to maintain the lungs in an inflated state. Subsequently, isolate lung samples and flash freeze them in liquid nitrogen or place them in fixing solutions for further studies.
   NOTE: Here, the lungs were perfused for 4 h.

Results

All lungs with CIT ranging from 20 min to 18 h could be perfused for 4 h (Figure 2)¹³. Compliance was stable in most groups with the exception of 18 h CIT, which gradually decreased over the 4 h perfusion period (Figure 2A). Despite this, no significant differences in vascular resistance, lung graft oxygenation, and glucose levels were observed for the groups (Figure 2B-D). L...

Discussion

This study described the necessary steps for establishing a rat EVLP protocol. Here, we show that donor lungs can be perfused for 4 h after cold static preservation of up to 18 h at 4 °C. This was demonstrated by assessing lung compliance, pulmonary vascular resistance, perfusate glucose/lactate concentration, and P/F ratio.

The rise of the EVLP platform as an important tool in the evaluation of lung function and for graft reconditioning has motivated several groups to develop a rat EVLP ...

Materials

Name	Company	Catalog Number	Comments
14 G intravenous catheter	BD	381167	Orotracheal intubation
16 G intravenous catheter	BD	381157	Catheter to flush the lung
2-0 Suture Sofsilk	Covidien	S-305	Tracheal tube fixation
3-0 Suture Sofsilk	Covidien	S303	Fixation of arterial and atrial cannulas
IPL-2 Core Isolated Perfused Lung System for Rat	Harvard Apparatus	734276	Ex Vivo Lung Perfusion (EVLP) system
Ketamine (Narketan)	Vetoquinol	440894	Sedation/anesthesia
Large Pulmonary Artery Cannula	Harvard Apparatus	73-0711
Left Atrial Cannula	Harvard Apparatus	73-0712
Low potassium dextran glucose solution (Perfadex)	XVIVO	19811	Preservation solution
Methylprednisolone sodium succinate (SOLU-MEDROL)	Pfizer	14705	Anti-inflammatory
Prostaglandin E1 (Prostin VR)	Pfizer	RX297945
Small Animal Ventilator (Model 683)	Harvard Apparatus	55-0000
Sodium heparin	Leo Pharma	453811
Steen Solution	XVIVO	19004	Buffered extracellular solution to perfuse lungs during EVLP
Sugita Aneur clip curv	Mizuho	07-940-86	Tracheal clamp
Tracheal Cannula	Harvard Apparatus	73-3384
Xylazine (Rompun)	Bayer Healthcare	2169592	Sedation/anesthesia