This project was supported by the National Natural Science Foundation of China (32201235 to Zhifei Fu), the Natural Science Foundation of Fujian Province, China (2022J01287 to Zhifei Fu), the Research Foundation for Advanced Talents at Fujian Medical University, China (XRCZX2021013 to Zhifei Fu), the Finance Special Science Foundation of Fujian Province, China (22SCZZX002 to Zhifei Fu), Foundation of NHC Key Laboratory of Technical Evaluation of Fertility Regulation for Non-human Primate, and Fujian Maternity and Child Health Hospital (2022-NHP-04 to Zhifei Fu). We thank Linying Zhou, Minxia Wu, Xi Lin, and Yan Hu at the Public Technology Service Center, Fujian Medical University for support with EM sample preparation and EM imaging.

Animal husbandry and experiments were approved by the Institutional Animal Care and Use Committee of Fujian Medical University Medical Center. The step-by-step workflow of the current protocol is shown in Figure 1.
1. Sample preparation
<ol>
	<li>Mouse brain
	<ol>
		<li>Purchase transgenic mice (see Table of Materials) and oligonucleotide primers (see Table of Materials) to genotype these mice.</li>
		<li>Perfuse and remove the intact brain from the cranial vault following previously published protocol12,13.</li>
		<li>Fix the mouse brain using 10 mL of fixative solution (see Table of Materials) at 4 &#176;C overnight.</li>
		<li>Rinse off the fixative solution for 3 x 10 min with 0.1 M phosphate buffer (PB).</li>
		<li>Slice the mouse brain into sections with 500 &#181;m thickness using an oscillating microtome (see Table of Materials).</li>
		<li>Cut the fluorescent regions into small blocks with a scalpel using a stereomicroscope (see Table of Materials). 
		NOTE: The volume of the small blocks must not be larger than 1 mm3.</li>
	</ol>
	</li>
	<li>Cultured cells
	<ol>
		<li>Seed HeLa cells into 6 cm cell culture dishes and maintain them in growth medium (Dulbecco&#39;s modified Eagle medium [DMEM] low glucose, supplemented with 10% fetal bovine serum [FBS]).</li>
		<li>On the following day, transfect the plasmids containing mScarlet into cells using DNA transfection reagent (see Table of Materials) following the instruction book of the transfection kit.</li>
		<li>Forty-eight hours after transfection, trypsinize the transfected cells and centrifuge them to obtain cell pellets at 1,000 &#215; g. The cell pellets are called sample blocks.</li>
	</ol>
	</li>
</ol>
2. EM sample preparation
<ol>
	<li>Fixation
	<ol>
		<li>Fix the sample blocks using a fixative solution (see Table of Materials) at 4 &#176;C overnight.</li>
		<li>Remove the fixative solution and rinse off the fixative solution for 3 x 10 min with 0.1 M PB from the sample blocks.</li>
	</ol>
	</li>
	<li>Osmium tetroxide (OsO4) staining
	<ol>
		<li>Fix the sample blocks with OsO4 solution (see Table of Materials) at 4 &#176;C for 1 h.</li>
		<li>Remove the OsO4 solution and rinse off the OsO4 solution 3 x 10 min with ddH2O from the sample blocks.</li>
	</ol>
	</li>
	<li>Uranyl acetate (UA) staining
	<ol>
		<li>Stain the sample blocks using 2% UA solution (see Table of Materials) at 4 &#176;C for 1 h.</li>
		<li>Remove the UA solution and rinse the sample blocks with ddH2O for 3 x 10 min.</li>
	</ol>
	</li>
	<li>Gradient dehydration
	<ol>
		<li>Dehydrate the sample blocks with gradient ethanol as follows: 50% for 10 min, 70% for 10 min, 80% for 10 min, 90% for 10 min, and 2 x 10 min in 100% ethanol.</li>
		<li>Dehydrate the sample blocks with anhydrous acetone for 3 x 10 min.</li>
	</ol>
	</li>
	<li>Resin infiltration
	<ol>
		<li>Infiltrate the sample blocks with gradient resin (see Table of Materials): acetone to resin 3:1 for 1 h, acetone to resin 1:1 for 2 h, acetone to resin 1:3 for 3 h.</li>
		<li>Replace with the pure resin for 3 x 12 h.</li>
	</ol>
	</li>
	<li>Resin embedding
	<ol>
		<li>Transfer sample blocks into capsules (see Table of Materials) using a toothpick.</li>
		<li>Add pure resin to the capsule containing the sample block and polymerize the resin in the oven at 60 &#176;C for 14-16 h.</li>
	</ol>
	</li>
</ol>
3. Coating of the coverglass with gold nanoparticles
<ol>
	<li>Coverglass cleaning
	<ol>
		<li>Wash the coverglasses with cleaning buffer (see Table of Materials) for 2 h at 142 &#176;C.</li>
		<li>Rinse off the cleaning buffer 3 x 10 min with ddH2O.</li>
		<li>Transfer the coverglasses carefully into a beaker containing anhydrous ethyl alcohol and incubate overnight.</li>
		<li>Air dry the coverglasses on a clean bench for several minutes.</li>
	</ol>
	</li>
	<li>Coat the coverglasses with gold nanoparticles.
	<ol>
		<li>Fix a glass slide in the center of the rotation of a desktop centrifuge (see Table of Materials) using glass cement.</li>
		<li>Mount a coverglass in the center of the glass slide using sticky notes.</li>
		<li>Add 75 &#181;L of 1% pioloform (see Table of Materials) onto the coverglass. 
		NOTE: We also tested Formvar (see Table of Materials) and it works well.</li>
		<li>Spin for 3 min at 1,360 &#215; g (Figure 2A) to produce a thin layer of pioloform on the surface of the coverglass.</li>
		<li>Incubate the coverglass surface with 250 &#181;L of 0.1% poly-L-lysine (see Table of Materials) for 1 h at room temperature (Figure 2B).</li>
		<li>Rinse with ddH2O and air dry the coverglass for several minutes.</li>
		<li>Dilute 80 nm gold nanoparticles (see Table of Materials) with ddH2O to 25% (v/v, OD600 = 0.07) (see Table of Materials) and sonicate for 15 min.</li>
		<li>Incubate the coverglass surface with the diluted gold nanoparticles for 1 h at room temperature (Figure 2C).</li>
		<li>Rinse with ddH2O and air dry the coverglass for several minutes. 
		NOTE: It works well 2 weeks after being coated with pioloform and gold nanoparticles. But we recommend using it immediately after being coated.</li>
	</ol>
	</li>
</ol>
4. Ultrathin sectioning
<ol>
	<li>Trim the surface of the sample block into a right-angled trapezoid. Cut sections at a thickness of 100 nm using a diamond knife (see Table of Materials) with an ultramicrotome (see Table of Materials). Separate a single section from the section band and float the single section in the water bath.</li>
	<li>Add a drop of ddH2O onto the center of the gold nanoparticle-coated coverglass. Pick up a section using a sample loop and invert the sample loop onto the surface of the water drop. Remove the sample loop, leaving the section on the surface of the water drop.</li>
	<li>Air dry the coverglass for several minutes. Draw an annulus around the section on the opposite side of the coverglass using a marker pen.</li>
</ol>
5. Light microscopy imaging
<ol>
	<li>Fluorescence recovery 
	NOTE: The workflow is shown in Figure 3A.
	<ol>
		<li>Add 10 &#181;L of mounting buffer (see Table of Materials) onto the ultrathin section on the coverglass. Place a new clean coverglass onto the mounting buffer. 
		NOTE: The key component of the mounting buffer is DABCO, which is used to recover the fluorescence of fluorescent proteins. This is very important for fluorescence recovery.</li>
		<li>Put these two coverglasses together with the ultrathin section into an imaging chamber (see Table of Materials). Make sure the coverglass with the drawn annulus is on the top.</li>
	</ol>
	</li>
	<li>Collect the navigation map.
	<ol>
		<li>Find the section using the drawn annulus as a marker in brightfield imaging mode of an inverted fluorescence microscope (see Table of Materials). Move to one corner of the section. Turn on the white light and take the brightfield image.</li>
		<li>Turn off the white light. Turn on the laser (561 nm) and take fluorescent images of the same field of view (FOV).</li>
		<li>Turn off the laser. Move to the adjacent FOV, making sure these two FOVs have a 10% overlap. Take the brightfield image and fluorescent image of the second FOV.</li>
		<li>Repeat this operation until the whole section is covered. Record the imaging path that can be used to stitch the FOV. 
		NOTE: For higher quality of the image, we recommend using the confocal microscope.</li>
	</ol>
	</li>
	<li>Image cells of interest.
	<ol>
		<li>Use the navigation map to easily target cells of interest. Turn on the laser (561 nm) and take 300 frames of fluorescent images of the cell of interest. Turn off the laser.</li>
		<li>Turn on the white light and take sequential brightfield images (~100 frames).</li>
		<li>Move to another cell of interest.</li>
	</ol>
	</li>
</ol>
6. Preparation for EM imaging
NOTE: The workflow is shown in Figure 3B.
<ol>
	<li>Transfer the ultrathin section to the slot grid.
	<ol>
		<li>Fill a glass jar with ddH2O.</li>
		<li>Remove the coverglasses from the chamber and separate the two coverglasses with tweezers. Clamp the coverglass on which the section is located, wash off the mounting buffer, and air dry.</li>
		<li>Score a # around the ultrathin section using a single-sided blade and drop 10 &#181;L of 12% hydrofluoric acid (see Table of Materials) at each corner of the #. Put the coverglass slowly into the water. 
		NOTE: Hydrofluoric acid reacts with glass, making it easier to remove the pioloform film from the cover glass. Hydrofluoric acid is toxic. Use it in a chemical hood with gloves. Contact with skin requires immediate medical attention.</li>
		<li>Float the pioloform film and ultrathin section on the surface of the water together. Put an uncoated slot grid on the section to capture the section in the center of the grid.</li>
		<li>Cover a glass slide with parafilm (see Table of Materials) and pick up the grid with the pioloform film. Air dry the grid at room temperature.</li>
	</ol>
	</li>
	<li>Section staining
	<ol>
		<li>Stain the section with 2% UA and Sato&#39;s triple lead. For more detail, refer to the previously published protocol2.</li>
	</ol>
	</li>
</ol>
7. Image analysis
<ol>
	<li>Stitch the navigation map.
	<ol>
		<li>Find the location of the raw data. Open the software ImageJ (see Table of Materials) to stitch the navigation map.</li>
		<li>Click on Plugins | Stitching | Grid/Collection stitching | (Type) Grid: snake by column | (Order) Up &#38; Left (according to shooting sequence) | Set slice size | Select data path | Set file name | Check Display fusion. Observe the result, which is a navigation map made up of several brightfield images of different FOVs.</li>
		<li>Use the same method to stitch a fluorescence navigation map.</li>
	</ol>
	</li>
	<li>Merge the brightfield images with the fluorescence images.
	<ol>
		<li>In the software ImageJ, click on File | Import | Image Sequence to import the sequential brightfield images of the cell of interest.</li>
		<li>Click on Image | Stacks | Z Projection | Sum Slices to get the sum intensity projection (SIP) image of the sequential brightfield images.</li>
		<li>Click on Edit | Invert to invert the SIP image of the brightfield so that the signals of the gold nanoparticles become bright white dots.</li>
		<li>In ImageJ, click on File | Import | Image Sequence to import the sequential FM images.</li>
		<li>Click on Image | Stacks | Z Projection | Sum Slices to get the SIP image of the sequential FM images.</li>
		<li>Click on Image | Color | Merge Channels to merge the SIP brightfield image with the SIP FM image as a composite image.</li>
		<li>The gold nanoparticles are green, and the fluorescent protein is red. Click on Image | Type | RGB Color to convert the format of the composite image into RGB.</li>
	</ol>
	</li>
</ol>
8. EM imaging
<ol>
	<li>Put the grid onto the sample hold, keeping the section side of the grid upward.</li>
	<li>Use the navigation map to roughly identify the position of corresponding cells under an electron microscope through four relative distances to the four different corners of the right trapezoid of the ultrathin section.</li>
	<li>Confirm the cells using the gold nanoparticles.</li>
	<li>Take EM images at different magnifications (4,200x, 6,000x, or 8,200x) with a transmission electron microscope (TEM) (see Table of Materials).</li>
</ol>
9. Registration of the FM image with the EM image
<ol>
	<li>Open the registration software (see Table of Materials). Type easyCLEMv014 in the search window. Click on easyCLEMv0 to open easyCLEMv0. Click on Image/Sequence | Open to import the EM image and the composite image into the panel of the software.</li>
	<li>In the EasyCLEMv0 window, click on 2D (x,y,[T]) to choose non rigid (2D or 3D) as the alignment mode.</li>
	<li>In the EasyCLEMv0 window, click on the dropdown box to the right of Select image that will be transformed and resized (likely FM) to choose Composite (RGB)color.tif. Then, click on the dropdown box to the right of Select image that will not be modified (likely EM) to choose EMimage. tif.</li>
	<li>Click on Start to begin the registration.</li>
	<li>In the EM image window named EMimage. tif, click on one gold nanoparticle to put Point 1 onto the gold nanoparticle. In the FM image window named Composite (RGB)color.tif, click on the corresponding gold nanoparticle to put Point 1 onto the gold nanoparticle.</li>
	<li>Click on Update Transformation to confirm the LM signal with the EM signal of the gold nanoparticles.</li>
	<li>Repeat the above operation in the EM image window named EMimage. tif and match the LM signal with the EM signal of the same gold nanoparticle one by one.</li>
	<li>Click on Stop to finish the registration.</li>
	<li>After image alignment, click on Overlayed image and click on Image/Sequence | Save as to export an image stack containing four channel images (red, green, blue, gray).</li>
	<li>Open ImageJ and click on File | Open to import the Overlayed image. Click on Image | Stacks | Stack to Images to separate the Overlayed image into four channel images.</li>
	<li>Click on Image | Color | Merge Channels to merge images from three channels (red, green, and gray) into a composite image.</li>
	<li>Click on Image | Type | RGB Color to convert the composite image to a CLEM image.</li>
</ol>

Novel Protocol for Simultaneous Fluorescence and Ultrastructure Preservation

<ol>
	<li>de Boer, P., Hoogenboom, J. P., Giepmans, B. N. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Correlated+light+and+electron+microscopy:+ultrastructure+lights+up.">Correlated light and electron microscopy: ultrastructure lights up.</a> Nat Methods. 12 (6), 503-513 (2015).</li><li>Kopek, B. G., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Diverse+protocols+for+correlative+super-resolution+fluorescence+imaging+and+electron+microscopy+of+chemically+fixed+samples.">Diverse protocols for correlative super-resolution fluorescence imaging and electron microscopy of chemically fixed samples.</a> Nat Protoc. 12 (5), 916-946 (2017).</li><li>Watanabe, S., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Protein+localization+in+electron+micrographs+using+fluorescence+nanoscopy.">Protein localization in electron micrographs using fluorescence nanoscopy.</a> Nat Methods. 8 (1), 80-84 (2011).</li><li>Johnson, E., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Correlative+in-resin+super-resolution+and+electron+microscopy+using+standard+fluorescent+proteins.">Correlative in-resin super-resolution and electron microscopy using standard fluorescent proteins.</a> Sci Rep. 5 (1), 9583 (2015).</li><li>Paez-Segala, M. G., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Fixation-resistant+photoactivatable+fluorescent+proteins+for+CLEM.">Fixation-resistant photoactivatable fluorescent proteins for CLEM.</a> Nat Methods. 12 (3), 215-218 (2015).</li><li>Fu, Z., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=mEosEM+withstands+osmium+staining+and+Epon+embedding+for+super-resolution+CLEM.">mEosEM withstands osmium staining and Epon embedding for super-resolution CLEM.</a> Nat Methods. 17 (1), 55-58 (2020).</li><li>Kukulski, W., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Correlated+fluorescence+and+3D+electron+microscopy+with+high+sensitivity+and+spatial+precision.">Correlated fluorescence and 3D electron microscopy with high sensitivity and spatial precision.</a> J Cell Biol. 192 (1), 111-119 (2011).</li><li>Peng, D., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Improved+fluorescent+proteins+for+dual-colour+post-embedding+CLEM.">Improved fluorescent proteins for dual-colour post-embedding CLEM.</a> Cells. 11 (7), 1077 (2022).</li><li>Campbell, B. C., Paez-Segala, M. G., Looger, L. L., Petsko, G. A., Liu, C. F. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Chemically+stable+fluorescent+proteins+for+advanced+microscopy.">Chemically stable fluorescent proteins for advanced microscopy.</a> Nat Methods. 19 (12), 1612-1621 (2022).</li><li>Tanida, I., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Two-color+in-resin+CLEM+of+Epon-embedded+cells+using+osmium+resistant+green+and+red+fluorescent+proteins.">Two-color in-resin CLEM of Epon-embedded cells using osmium resistant green and red fluorescent proteins.</a> Sci Rep. 10 (1), 21871 (2020).</li><li>Tanida, I., Kakuta, S., Oliva Trejo, J. A., Uchiyama, Y. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Visualization+of+cytoplasmic+organelles+via+in-resin+CLEM+using+an+osmium-resistant+far-red+protein.">Visualization of cytoplasmic organelles via in-resin CLEM using an osmium-resistant far-red protein.</a> Sci Rep. 10 (1), 11314 (2020).</li><li>MacManus, D. B. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Excision+of+whole+intact+mouse+brain.">Excision of whole intact mouse brain.</a> MethodsX. 10, 102246 (2023).</li><li>Lu, X., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Preserving+extracellular+space+for+high-quality+optical+and+ultrastructural+studies+of+whole+mammalian+brains.">Preserving extracellular space for high-quality optical and ultrastructural studies of whole mammalian brains.</a> Cell Rep Methods. 3 (7), 24 (2023).</li><li>Paul-Gilloteaux, P., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=eC-CLEM:+flexible+multidimensional+registration+software+for+correlative+microscopies.">eC-CLEM: flexible multidimensional registration software for correlative microscopies.</a> Nat Methods. 14 (2), 102-103 (2017).</li><li>Fenno, L. E., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Comprehensive+dual-+and+triple-feature+intersectional+single-vector+delivery+of+diverse+functional+payloads+to+cells+of+behaving+mammals.">Comprehensive dual- and triple-feature intersectional single-vector delivery of diverse functional payloads to cells of behaving mammals.</a> Neuron. 107 (5), 836-853 (2020).</li><li>Shcherbo, D., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Far-red+fluorescent+tags+for+protein+imaging+in+living+tissues.">Far-red fluorescent tags for protein imaging in living tissues.</a> Biochem J. 418 (3), 567-574 (2009).</li><li>Shen, Y., Chen, Y., Wu, J., Shaner, N. C., Campbell, R. E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Engineering+of+mCherry+variants+with+long+Stokes+shift,+red-shifted+fluorescence,+and+low+cytotoxicity.">Engineering of mCherry variants with long Stokes shift, red-shifted fluorescence, and low cytotoxicity.</a> PLoS One. 12 (2), e0171257 (2017).</li><li>Ai, H. W., Olenych, S. G., Wong, P., Davidson, M. W., Campbell, R. E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Hue-shifted+monomeric+variants+of+Clavularia+cyan+fluorescent+protein:+identification+of+the+molecular+determinants+of+color+and+applications+in+fluorescence+imaging.">Hue-shifted monomeric variants of Clavularia cyan fluorescent protein: identification of the molecular determinants of color and applications in fluorescence imaging.</a> BMC Biol. 6 (13), 1741 (2008).</li><li>Ogoh, K., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Dual-color-emitting+green+fluorescent+protein+from+the+sea+cactus+Cavernularia+obesa+and+its+use+as+a+pH+indicator+for+fluorescence+microscopy.">Dual-color-emitting green fluorescent protein from the sea cactus Cavernularia obesa and its use as a pH indicator for fluorescence microscopy.</a> Luminescence. 28 (4), 582-591 (2013).</li><li>Bindels, D. S., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=mScarlet:+a+bright+monomeric+red+fluorescent+protein+for+cellular+imaging.">mScarlet: a bright monomeric red fluorescent protein for cellular imaging.</a> Nat Methods. 14 (1), 53-56 (2017).</li><li>Xu, P., Xu, T., Zhang, M., Fu, Z., He, W. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+protocol+for+Epon-embedding-based+correlative+super-resolution+light+and+electron+microscopy.">A protocol for Epon-embedding-based correlative super-resolution light and electron microscopy.</a> Research Square. , (2019).</li><li>Johnson, E., Kaufmann, R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Preserving+the+photoswitching+ability+of+standard+fluorescent+proteins+for+correlative+in-resin+super-resolution+and+electron+microscopy.">Preserving the photoswitching ability of standard fluorescent proteins for correlative in-resin super-resolution and electron microscopy.</a> Methods Cell Biol. 140, 49-67 (2017).</li><li>Zhou, S., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Liquid-liquid+phase+separation+mediates+the+formation+of+herpesvirus+assembly+compartments.">Liquid-liquid phase separation mediates the formation of herpesvirus assembly compartments.</a> J Cell Biol. 222 (1), 17 (2023).</li><li>Tao, C. L., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Differentiation+and+characterization+of+excitatory+and+inhibitory+synapses+by+cryo-electron+tomography+and+correlative+microscopy.">Differentiation and characterization of excitatory and inhibitory synapses by cryo-electron tomography and correlative microscopy.</a> J Neurosci. 38 (6), 1493-1510 (2018).</li></ol>

The authors have no conflicts of interest to declare.

The protocol presented here is a versatile imaging method, which can combine the localization information of the target protein from light microscopy (LM) and the context surrounding the target protein from electron microscopy (EM)6. With the limitations of current fluorescent proteins, the widely used method is pre embedding correlative light and electron microscopy (CLEM), which means the LM imaging is done before the EM sample preparation. Almost all existing fluorescent proteins can be examine...

Fluorescence microscopy (FM) can be used to obtain the localization and distribution of the target protein. However, the context that surrounds the target protein is lost, which is crucial for investigating the target protein thoroughly. Electron microscopy (EM) has the highest imaging resolution, providing several subcellular details. Nevertheless, EM lacks target labeling. By accurately merging the fluorescence image taken by FM with the gray image acquired by EM, correlative light and electron microscopy (CLEM) can combine the information obtained by these two imaging modes1,2,3,4.
CLEM is a trade-off between fluorescence and the ultrastructure1. Because of the limitations of current fluorescent proteins and the traditional EM sample preparation procedures, especially the use of osmic acid (OsO4) and hydrophobic resins such as Epon, the ultrastructure always compromises fluorescence5. OsO4 is an indispensable reagent in EM sample preparation, which is used to improve the contrast of EM images. Compared with other embedding resins, Epon is superior in ultrastructure preservation and sectioning properties5. However, no fluorescent proteins can retain the fluorescence signal after the treatment of OsO4 and Epon embedding6. To overcome the limitations of fluorescent proteins, pre embedding CLEM was developed, in which FM imaging is done before EM sample preparation6. However, the drawback of pre embedding CLEM is the imprecise registration between the FM and the EM images5.
On the contrary, post embedding CLEM method performs the FM imaging after the EM sample preparation, the registration accuracy of which can reach 6-7 nm5,6. To retain the fluorescence of fluorescent proteins, very low concentrations of OsO4 (0.001%)3 or the high-pressure frozen (HPF) and freeze substitution (FS) EM preparation methods4,7 have been used at the expense of compromised ultrastructure or the contrast of the EM image. The development of mEos4b greatly promotes the progress of post embedding CLEM, although glycidyl methacrylate is used as the embedding resin5. With the development of mEosEM, which can survive the OsO4 staining and Epon embedding, Epon post embedding super-resolution CLEM was achieved for the first time, maintaining the fluorescence and ultrastructure simultaneously6. After mEosEM, several fluorescent proteins that can survive the OsO4 staining and the Epon embedding were developed8,9,10,11. This greatly promotes the development of CLEM.
There are three key aspects to Epon post-embedding CLEM. The first is the fluorescent protein, which should maintain the fluorescent signal after EM sample preparation. According to our experience, mScarlet is superior to other reported fluorescent proteins. The second is how to find the same cell imaged by FM imaging in EM imaging. To solve this problem, we improve the procedure for this step so that one can readily find the targeted cell. The last is the method to align the FM image with the EM image. Here, we detail the registration between the FM and the EM images. In this protocol, we express mScarlet in VGLUT2 neurons and demonstrate that mScarlet can target secondary lysosomes using Epon post-embedding CLEM. We provide step-by-step details for Epon post-embedding CLEM, without compromising the fluorescence and the ultrastructure.

<table border="1" fo:keep-together.within-page="1" fo:keep-with-next.within-page="always">
	<tbody>
		<tr>
			<td>0.2 M Phosphate Buffer (PB)</td>
			<td></td>
			<td></td>
			<td>NaH2PO4 &#183; 2H2O+Na2HPO4 &#183; 12H2O</td>
		</tr>
		<tr>
			<td>0.2 M Tris-Cl (pH 8.5)</td>
			<td>Shanghai yuanye Bio-Technology</td>
			<td>R26284</td>
			<td></td>
		</tr>
		<tr>
			<td>25% Glutaraldehyde (GA)</td>
			<td>Alfa Aesar</td>
			<td>A17876</td>
			<td>Hazardous chemical</td>
		</tr>
		<tr>
			<td>Abbelight 3D</td>
			<td>Nanolnsights</td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>Acetone</td>
			<td>SCR</td>
			<td>10000418</td>
			<td></td>
		</tr>
		<tr>
			<td>Ammonium hydroxide</td>
			<td>J&#38;K Scientific</td>
			<td>335213</td>
			<td></td>
		</tr>
		<tr>
			<td>BioPhotometer D30</td>
			<td>eppendorf</td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>Cleaning buffer of cover glasses</td>
			<td></td>
			<td></td>
			<td>50 mL Ammonium hydroxide, 50 mL Hydrogen peroxide, 250 mL H2O</td>
		</tr>
		<tr>
			<td>Coverglass</td>
			<td>Warner</td>
			<td>64-0715</td>
			<td></td>
		</tr>
		<tr>
			<td>DABCO&#160;</td>
			<td>Sigma</td>
			<td>290734</td>
			<td>Hazardous chemical</td>
		</tr>
		<tr>
			<td>DDSA</td>
			<td>SPI company</td>
			<td>GS02827</td>
			<td>Hazardous chemical</td>
		</tr>
		<tr>
			<td>Desktop centrifuge</td>
			<td>WIGGENS</td>
			<td>MINICEN 10E</td>
			<td></td>
		</tr>
		<tr>
			<td>Diamond knife</td>
			<td>DiATOME</td>
			<td>MX6353</td>
			<td></td>
		</tr>
		<tr>
			<td>DMP-30</td>
			<td>SPI company</td>
			<td>GS02823</td>
			<td>Hazardous chemical</td>
		</tr>
		<tr>
			<td>DNA transfection reagent</td>
			<td>Thermo Fisher&#160;</td>
			<td>2696953</td>
			<td>Lipofectamine 3000 Transfection Kit</td>
		</tr>
		<tr>
			<td>Epon 812&#160;</td>
			<td>SPI company</td>
			<td>GS02659</td>
			<td>Hazardous chemical</td>
		</tr>
		<tr>
			<td>Ethanol</td>
			<td>SCR</td>
			<td>10009218</td>
			<td></td>
		</tr>
		<tr>
			<td>Fiji image J</td>
			<td>National Institutes of Health</td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>Fixative solution&#160;</td>
			<td></td>
			<td></td>
			<td>4% PFA+0.25% GA+0.02 M PB</td>
		</tr>
		<tr>
			<td>Formvar</td>
			<td>Sigma</td>
			<td>9823</td>
			<td></td>
		</tr>
		<tr>
			<td>Glycerol</td>
			<td>SCR</td>
			<td>10010618</td>
			<td></td>
		</tr>
		<tr>
			<td>Gold nanoparticles</td>
			<td>Corpuscular</td>
			<td>790120-010</td>
			<td></td>
		</tr>
		<tr>
			<td>Gradient resin</td>
			<td></td>
			<td></td>
			<td>Acetone to resin 3:1, 1:1, 1:3</td>
		</tr>
		<tr>
			<td>Hydrofluoric acid</td>
			<td>SCR</td>
			<td>10011118</td>
			<td></td>
		</tr>
		<tr>
			<td>Hydrogen peroxide</td>
			<td>SCR</td>
			<td>10011218</td>
			<td></td>
		</tr>
		<tr>
			<td>ICY (https://icy.bioimageanalysis.org/about/)</td>
			<td></td>
			<td></td>
			<td>Easy CLEMv0 Plugin</td>
		</tr>
		<tr>
			<td>Imaging chamber</td>
			<td>Thermo Fisher&#160;</td>
			<td>A7816</td>
			<td></td>
		</tr>
		<tr>
			<td>Large gelatin capsules</td>
			<td>Electron Microscopy Sciences</td>
			<td>70117</td>
			<td></td>
		</tr>
		<tr>
			<td>Mounting buffer</td>
			<td></td>
			<td></td>
			<td>Mowiol 4-88, Glycerol, 0.2 M Tris-Cl (pH 8.5), DABCO</td>
		</tr>
		<tr>
			<td>Mowiol 4-88</td>
			<td>Sigma</td>
			<td>9002-89-5</td>
			<td></td>
		</tr>
		<tr>
			<td>Na2HPO4&#160;&#382;12H2O</td>
			<td>SCR</td>
			<td>10020318</td>
			<td></td>
		</tr>
		<tr>
			<td>NaH2PO4&#160;&#382;2H2O</td>
			<td>SCR</td>
			<td>20040718</td>
			<td></td>
		</tr>
		<tr>
			<td>NMA</td>
			<td>SPI company</td>
			<td>GS02828</td>
			<td>Hazardous chemical</td>
		</tr>
		<tr>
			<td>Oligonucleotide primers</td>
			<td>Takara Biomedical Technology (Beijing)</td>
			<td></td>
			<td>Three oligonucleotides primers were used to detect Vglut2-ires-Cre and wild-type simultaneously. The primers 5,-ATCGACCGGTAATGCAGGCAA-3, and 5,-CGGTACCACCAAATCTTACGG-3, aimed to detect Vglut2-ires-Cre. The primers&#160; 5,-CGGTACCACCAAATCTTACGG-3, and 5,-CATGGTCTGTTTTGAATTCAG-3, aimed to detect wild-type.</td>
		</tr>
		<tr>
			<td>Oscillating microtome</td>
			<td>Leica</td>
			<td>VT1000S</td>
			<td></td>
		</tr>
		<tr>
			<td>Osmium tetroxide</td>
			<td>SCR</td>
			<td>L01210302</td>
			<td>Hazardous chemical</td>
		</tr>
		<tr>
			<td>OsO4 solution</td>
			<td></td>
			<td></td>
			<td>1% Osmium tetroxide+1.5% K4Fe (CN)6&#183;3H2O</td>
		</tr>
		<tr>
			<td>Parafilm</td>
			<td>Amcor</td>
			<td>PM-996</td>
			<td></td>
		</tr>
		<tr>
			<td>Paraformaldehyde (PFA)</td>
			<td>SCR</td>
			<td>80096618</td>
			<td>Hazardous chemical</td>
		</tr>
		<tr>
			<td>Perfusion buffer</td>
			<td></td>
			<td></td>
			<td>4% PFA+0.1 M PB</td>
		</tr>
		<tr>
			<td>Pioloform</td>
			<td>Sigma</td>
			<td>63148-65-2</td>
			<td>Hazardous chemical</td>
		</tr>
		<tr>
			<td>Poly-L-lysine&#160;</td>
			<td>Sigma</td>
			<td>25986-63-0</td>
			<td></td>
		</tr>
		<tr>
			<td>Potassium ferrocyanide (K4Fe (CN)6&#183;3H2O)&#160;</td>
			<td>SCR</td>
			<td>10016818</td>
			<td></td>
		</tr>
		<tr>
			<td>Scalpel blades</td>
			<td>Merck</td>
			<td>S2771</td>
			<td></td>
		</tr>
		<tr>
			<td>Scalpel handles</td>
			<td>Merck</td>
			<td>S2896-1EA</td>
			<td></td>
		</tr>
		<tr>
			<td>Stereomicroscope</td>
			<td>OLYMPUS</td>
			<td>MVX10</td>
			<td></td>
		</tr>
		<tr>
			<td>Transgenic mice</td>
			<td>The Jackson Laboratory</td>
			<td></td>
			<td>Vglut2-ires-Cre mice (strain: 129S6/SvEvTac) were housed in standard conditions (25 &#176;C, a 12 h light/dark cycle, with water and food given ad libitum. Male and Female mice were used at 2&#8211;3 months old, weight range 20-30 g.&#160;&#160;</td>
		</tr>
		<tr>
			<td>Transmission electron microscope (TEM)</td>
			<td>FEI</td>
			<td></td>
			<td>TECNAL G2</td>
		</tr>
		<tr>
			<td>UA solution (2% UA)</td>
			<td></td>
			<td></td>
			<td>Aqueous solution</td>
		</tr>
		<tr>
			<td>Ultramicrotome</td>
			<td>Leica</td>
			<td>LEICA EM UC6</td>
			<td></td>
		</tr>
		<tr>
			<td>Uranyl acetate (UA)</td>
			<td>TED PELLA</td>
			<td>19481</td>
			<td>Hazardous chemical</td>
		</tr>
	</tbody>
</table>

epon post embedding correlative light and electron microscopy

Correlative light and electron microscopy (CLEM) is a comprehensive microscopy that combines the localization information provided by fluorescence microscopy (FM) and the context of cellular ultrastructure acquired by electron microscopy (EM). CLEM is a trade-off between fluorescence and ultrastructure, and usually, ultrastructure compromises fluorescence. Compared with other hydrophilic embedding resins, such as glycidyl methacrylate, HM20, or K4M, Epon is superior in ultrastructure preservation and sectioning properties. Previously, we had demonstrated that mEosEM can survive osmium tetroxide fixation and Epon embedding. Using mEosEM, we achieved, for the first time, Epon post embedding CLEM, which maintains the fluorescence and the ultrastructure simultaneously. Here, we provide step-by-step details about the EM sample preparation, the FM imaging, the EM imaging, and the image alignment. We also improve the procedures for identifying the same cell imaged by FM imaging during the EM imaging and detail the registration between the FM and EM images. We believe one can easily achieve Epon post embedding correlative light and electron microscopy following this new protocol in traditional EM facilities.

Author Spotlight: Advancements in Correlative Light and Electron Microscopy with Fluorescent Protein Preservation

Epon Post Embedding Correlative Light and Electron Microscopy

Previous reports demonstrated that mScarlet can target the lysosome15. In this protocol, AAV expressing mScarlet (rAAV-hSyn-DIO-mScarlet-WPRE-pA) was injected into the M1 (ML: &#177;1.2 AP: +1.3 DV: -1.5) of Vglut2-ires-cre mouse brain using stereotaxic instruments. Following the protocol described above, the final correlated image is shown in Figure 4A. The FM image can be accurately aligned with the EM image using gold nanoparticles (the green dots)...

Watch this Scientific Journal Video about Epon Post Embedding Correlative Light and Electron Microscopy at JoVE.com

We present a detailed protocol for Epon post-embedding correlative light and electron microscopy using a fluorescent protein called mScarlet. This method can maintain the fluorescence and the ultrastructure simultaneously. This technique is amenable to a wide variety of biological applications.

Correlative light and electron microscopy (CLEM) is a comprehensive microscopy that combines the localization information provided by fluorescence ...

epon-post-embedding-correlative-light-and-electron-microscopy

Research

JoVE Journal

Biology

876 Views.  Fujian Medical University. We present a detailed protocol for Epon post-embedding correlative light and electron microscopy using a fluorescent protein called mScarlet. This method can maintain the fluorescence and the ultrastructure simultaneously. This technique is amenable to a wide variety of biological applications.