Accedi

Chapter 13

Introduction to Signals and Systems

Segnale e sistema
Segnale e sistema
Signals are sets of data or information. One-dimensional signals include single-variable functions, such as the variations in air pressure over time in ...
Classificazione dei segnali
Classificazione dei segnali
Signals are categorized as Continuous-time or discrete-time, Periodic or aperiodic, Analog or digital, and Causal or noncausal. A continuous-time signal ...
Energia e segnali di potenza
Energia e segnali di potenza
Consider an electric system with a resistor. Here, the voltage and current signals enable power and energy measurement across the resistor. For a ...
Segnali pari e dispari
Segnali pari e dispari
An even signal, either in continuous-time or discrete-time, is defined as a signal that matches its own time-reversed version. Even signals are ...
Segnali di base a tempo continuo
Segnali di base a tempo continuo
Basic continuous-time signals include the unit step function, unit impulse function, and unit ramp function. These are collectively referred to as ...
Funzione a impulsi rettangolari e triangolari
Funzione a impulsi rettangolari e triangolari
The unit rectangular pulse function is mathematically represented by the rectangular function centered at the origin with a height of one unit. Two ...
Segnali esponenziali e sinusoidali
Segnali esponenziali e sinusoidali
The exponential function serves as an essential tool for characterizing waveforms that rise and decay rapidly. This function is defined using the ...
Segnali a tempo discreto di base
Segnali a tempo discreto di base
The unit step sequence is expressed as 1 for zero and positive values of integer 'n'. This can be graphically displayed using a set of eight ...
Operazioni di base sui segnali
Operazioni di base sui segnali
Basic signal operations are time reversal, scaling, shifting, and amplitude transformations. Time reversal mirrors a continuous-time signal about the ...
Classificazione dei sistemi-I
Classificazione dei sistemi-I
Linearity is a system property with a direct input-output relationship, combining homogeneity and additivity. Homogeneity dictates that if an input is ...
Classificazione dei sistemi-II
Classificazione dei sistemi-II
Continuous-time systems have continuous input and output signals, with time measured continuously, and are generally defined by differential or algebraic ...
JoVE Logo

Riservatezza

Condizioni di utilizzo

Politiche

Ricerca

Didattica

CHI SIAMO

Copyright © 2025 MyJoVE Corporation. Tutti i diritti riservati