This work was supported by a Wellcome Project Grant (078043/Z/05/Z) to R.O.J.W.

PART A: High-throughput growth of bacterial cultures.
1. Grow Bacteria Overnight in 2 ml of Autoinduction Medium Using 24-well Plates
<ol>
 <li>Sterilise the 24-well plates by microwaving.</li>
 <li>Inoculate 1.5 ml of autoinduction medium (Overnight Express Medium) with freshly grown bacterial colonies or frozen glycerol stocks. We normally inoculate three wells per mutant with three individual cloned colonies. Reserve six wells for positive and negative controls. For the positive controls we grow up three wildtype clones and for the negative controls we grow up 2 clones which have been transformed with a non-expressing plasmid. Check for sufficient sterilization of the plate by leaving one well blank for the medium-only control.</li>
 <li>Grow the cells for 18 hr at 37 &deg;C and shaking at 250 rpm. We use lac-inducible BL21 (DE3) Rosetta 2 cells. Autoinduction medium contains a mixture of glucose and lactose. The bacteria initially feed on glucose and then begin to use lactose, which also induces the expression of the recombinant proteins.</li>
 <li>Remove the lid and place the plate on the robotic platform.</li>
</ol>
PART B: Robotic purification of recombinant proteins.
2. Prepare the Robotic Platform
<ol>
 <li>
Make up the wash buffer consisting of 20 mM imidazole, 0.1% Triton X-100, 0.5 M NaCl, 20 mM Tris-acetate, pH 7.9, 10 mM MgOAc2, 0.7 mM ZnOAc2, 10% glycerol, and the elution buffer consisting of 0.5 M imidazole, 0.1 % Triton X-100, 0.5 M NaCl, 20 mM Tris-acetate, pH 7.9, 10 mM MgOAc2, 0.7 mM ZnOAc2, 10% glycerol. These buffers will be used to wash the beads after the tagged proteins have been bound to them, or to elute the proteins from the beads, respectively.</li>
 <li>Make up the bacterial diluent (100 ml distilled water with 15 &mu;l antifoam reagent). This solution will be used to make dilutions of the bacterial overnight cultures for optical density (A600) measurements. The presence of antifoam in the diluent prevents the formation of air bubbles that would interfere with the plate reader measurements.</li>
 <li>Make up the lysis solution consisting of 10x FastBreak reagent, 2 &mu;l lysonase per sample and 15 mM MgOAc2. FastBreak contains a mix of detergents and salts that break the bacterial cell walls and facilitate the release of intracellular proteins. Lysonase is a proprietary mix of lysozyme and a nuclease. Lysozyme assists in disrupting the cell wall and the nuclease digests the released bacterial nucleic acids.</li>
 <li>Optional: Make up a 6 M guanidine hydrochloride solution. Some recombinant proteins tend to stick to the Teflon-coated pipetting needles. The guanidine hydrochloride solution denatures proteins and washes them off more effectively than water that is routinely used to rinse the washable robotic pipetting tips after each step.</li>
 <li>Prepare the BCA (bicinchoninic acid) protein quantitation reagent by mixing bicinchoninic acid solution (reagent A) and the copper sulphate solution (reagent B): Peptide bonds reduce Cu2+ from the CuSO4 component present in the BCA reagent to Cu1+ whereby the amount of Cu1+ is proportional to the number of peptide bonds present in the solution. In a second step, two molecules of bicinchoninic acid chelate Cu1+ resulting in an absorbance shift to 562 nm, resulting in a purple colour. The colour reaction is time-dependent and usually needs several hours to be definitive. After that the colour is stable for several hours.</li>
 <li>Fill troughs or plates of the right size and place them in their pre-allocated positions on the robotic platform.</li>
 <li>Place one 24-well plate for the guanidine hydrochloride waste, two clear 96-well plates for OD600 and absorbance measurements and one blue 96-well plate for the purified proteins on their positions on the platform. Place one 96-deepwell plate on the magnetic stand.</li>
 <li>Dilute MagneHis Ni-particles which bind proteins by forming chelates with their His-tags 5-fold in distilled water and fill them into the bead-stirring unit. Switch the stirrer on to keep the beads in suspension.</li>
 <li>Switch on the robotic platform and flush the pipetting needles for several minutes to remove air bubbles which would otherwise interfere with the pipetting accuracy. The re-usable pipetting needles are flushed in between individual pipetting steps. Alternatively, disposable tips could be used. All subsequent steps are carried out robotically. The robotic protocol is available on request.</li>
</ol>
3. Cell Growth is Checked by Measuring the OD600
<ol>
 <li>10 &mu;l of overnight culture is diluted in 90 &mu;l of diluent solution.</li>
 <li>Measure the OD600 to ensure that the bacteria have grown to similar densities (Figure 1).</li>
</ol>
4. The Cells are Broken up to Release the Proteins and to Allow Bead-binding
<ol>
 <li>100 &mu;l of magnetic Ni-bead suspension is distributed into each well of a second 24-well plate.</li>
 <li>900 &mu;l of each small-scale bacterial culture is transferred into the 24-well plate containing the beads. Add 100 &mu;l of the 10x FastBreak/lysonase mix.</li>
 <li>The 24-well plate is transferred to the shaking platform for rapid shaking (800 rpm) for 30 min at room temperature. Bacterial cell walls are disrupted by a combination of mechanical forces and chemical action and the recombinantly produced proteins are released into solution. With their affinity tags they immediately bind the paramagnetic chelating nickel beads.</li>
</ol>
5. The Beads are Washed
<ol>
 <li>The cell-lysates containing the resuspended magnetic beads are transferred to a 96-deepwell plate which is positioned on a stand with magnetic rods that slide between the wells. The 96-well plates have got a square cone-shaped bottom which allows easier removal of the supernatant. The wells can hold volumes of up to 2.1 ml but are filled with much smaller volumes. This enables us to perform vigorous shaking steps without sample cross-contamination by splashing.</li>
 <li>The pipette tips are washed between individual pipetting steps with 6 M guanidine-HCl. This step is crucial for the purification of TFIIB and other "sticky" proteins to avoid cross-contamination. With other proteins it may be sufficient to rinse the needles extensively with water between the pipetting steps.</li>
 <li>The magnetic rods of the magnetic stand attract the paramagnetic beads, pulling them away from the centres of the wells and allow the pipetting needles free access to the supernatant. The supernatant is discarded.</li>
 <li>500 &mu;l of wash buffer is first added to the 24-well plate and subsequently transferred to the 96-well plate to ensure the complete transfer of the beads. The 24-well plate is removed from the shaker.</li>
 <li>Another 500 &mu;l of wash buffer is added directly to the 96-well plate, the plate is transferred to the shaker and vigorously shaken for 1 min. The plate is moved back to the magnetic stand and the wash buffer discarded.</li>
 <li>This step is repeated twice and the wash procedure is finished by removing any buffer remnants from the plate.</li>
</ol>
6. Elute the Proteins in Elution Buffer
<ol>
 <li>100 &mu;l of elution buffer is added to the beads, the plate is moved to the shaker and vigorously shaken for 30 min at room temperature.</li>
 <li>The plate is moved back to the shaker and the eluate, containing the purified recombinant protein, is transferred to a new plate.</li>
</ol>
7. Measure the Concentrations of the Purified Proteins
<ol>
 <li>190 &mu;l of BCA reagent mix is transferred to a clear 96-well plate and 10 &mu;l of the protein solution added.</li>
 <li>After several hours of incubation (typically 5-6 or overnight), measure the absorbance and compare it to BSA standards to determine the concentrations of each of the purified protein preparations (Figure 2).</li>
 <li>The purified proteins can now be used for downstream applications at the appropriate concentrations (Figure 3).</li>
</ol>
8. Representative Results
The purification protocol offers two quality control stages, examples of which are shown. We are able to identify and document potential problems at the bacterial growth stage (Figure 1) and later on upon assessing the yields of the purified proteins (Figure 2). We typically purify proteins and test them in triplicate. This, in combination with the two quality control steps, gives us confidence that any variation we observed in our functional assays are due to the mutant phenotype (Figure 3) and not caused by experimental variations or failed purifications. The yields obtained typically range from 50-200 &mu;g and are more than sufficient for various functional assays.
<img alt="Figure 1" src="/files/ftp_upload/4110/4110fig1.jpg" /> 
 Figure 1. Histogram of the OD measurements of a 24 well plate with overnight cultures. Three clones of six TFIIB mutant variants as well as of the wildtype TFIIB have been grown. Two clones carrying a non-expressing plasmid and a well with medium only serve as negative controls. The OD measurements show that there are small variations in the growth rates between individual cultures.
<img alt="Figure 2" src="/files/ftp_upload/4110/4110fig2.jpg" /> 
 Figure 2. Protein yields obtained from these cultures as determined by a BCA assay and confirmed by SDS PAGE. One of the variants is not expressed at high levels. In combination with Figure 1, we can conclude that this was not due to differential cell growth but due to protein expression not being induced properly.
<img alt="Figure 3" src="/files/ftp_upload/4110/4110fig3.jpg" /> 
 Figure 3. Representative result of a transcription assay. We measured the stimulation activity of TFIIB variants on the production of small abortive transcripts by RNAP. Here, the stimulation effects of a full library of single amino acid substitutions of TFIIB residue K87 are shown. The high degree of reproducibility is confirmed by small error rates. A sample gel showing the performance of three mutants as compared to wildtype (wt), negative controls (NC) and elution buffer only controls is depicted underneath.

<ol>
	<li>Weinzierl, R. O. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+nucleotide+addition+cycle+of+RNA+polymerase+is+controlled+by+two+molecular+hinges+in+the+Bridge+Helix+domain.">The nucleotide addition cycle of RNA polymerase is controlled by two molecular hinges in the Bridge Helix domain.</a> BMC Biol. 8, 1741-7007 (2010).</li><li>Nottebaum, S., Tan, L., Trzaska, D., Carney, H. C., Weinzierl, R. O. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+RNA+polymerase+factory:+a+robotic+in+vitro+assembly+platform+for+high-throughput+production+of+recombinant+protein+complexes.">The RNA polymerase factory: a robotic in vitro assembly platform for high-throughput production of recombinant protein complexes.</a> Nucleic Acids Res. 36, 245-252 (2008).</li><li>Tan, L., Wiesler, S., Trzaska, D., Carney, H. C., Weinzierl, R. O. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Bridge+helix+and+trigger+loop+perturbations+generate+superactive+RNA+polymerases.">Bridge helix and trigger loop perturbations generate superactive RNA polymerases.</a> J. Biol. 7, 40 (2008).</li><li>Wiesler, S. C., Weinzierl, R. O. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+linker+domain+of+basal+transcription+factor+TFIIB+controls+distinct+recruitment+and+transcription+stimulation+functions.">The linker domain of basal transcription factor TFIIB controls distinct recruitment and transcription stimulation functions.</a> Nucleic Acids Res. 39, 464-474 (2011).</li><li>Weinzierl, R. O., Wiesler, S. C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Revealing+the+Function+of+TFIIB.">Revealing the Function of TFIIB.</a> Transcription. , (2011).</li><li>Bell, S. D., Magill, C. P., Jackson, S. P. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Basal+and+regulated+transcription+in+Archaea.">Basal and regulated transcription in Archaea.</a> Biochemical Society transactions. 29, 392-395 (2001).</li><li>Parvin, J. D., Sharp, P. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=DNA+topology+and+a+minimal+set+of+basal+factors+for+transcription+by+RNA+polymerase+II.">DNA topology and a minimal set of basal factors for transcription by RNA polymerase II.</a> Cell. 73, 533-540 (1993).</li><li>Tyree, C. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Identification+of+a+minimal+set+of+proteins+that+is+sufficient+for+accurate+initiation+of+transcription+by+RNA+polymerase+II.">Identification of a minimal set of proteins that is sufficient for accurate initiation of transcription by RNA polymerase II.</a> Genes. 7, 1254-1265 (1993).</li><li>Batada, N. N., Westover, K. D., Bushnell, D. A., Levitt, M., Kornberg, R. D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Diffusion+of+nucleoside+triphosphates+and+role+of+the+entry+site+to+the+RNA+polymerase+II+active+center.">Diffusion of nucleoside triphosphates and role of the entry site to the RNA polymerase II active center.</a> Proceedings of the National Academy of Sciences of the United States of America. 101, 17361-17364 (2004).</li><li>Liu, X., Bushnell, D. A., Wang, D., Calero, G., Kornberg, R. D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Structure+of+an+RNA+Polymerase+II-TFIIB+Complex+and+the+Transcription+Initiation+Mechanism.">Structure of an RNA Polymerase II-TFIIB Complex and the Transcription Initiation Mechanism.</a> Science (New York, N.Y). 327, 206-209 (2010).</li><li>Kostrewa, D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=RNA+polymerase+II-TFIIB+structure+and+mechanism+of+transcription+initiation.">RNA polymerase II-TFIIB structure and mechanism of transcription initiation.</a> Nature. 462, 323-330 (2010).</li><li>Werner, F., Weinzierl, R. O. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Direct+modulation+of+RNA+polymerase+core+functions+by+basal+transcription+factors.">Direct modulation of RNA polymerase core functions by basal transcription factors.</a> Molecular and cellular biology. 25, 8344-8355 (2005).</li></ol>

No conflicts of interest declared.

The automated recombinant protein purification method described here allows the production and purification of a large number of mutant proteins in a small-scale format under highly reproducible conditions with minimal human intervention. Figures 1 and 2 show results of systematic quality-controls and examples of the purified proteins. Figure 3 shows that the purified transcription factors used in this example perform in a highly reproducible manner in functional assays.
Even though the procedure was developed for the purification of archaeal TFIIB, it is widely applicable for the purification of affinity-tagged proteins. The use of such automated purification protocols will thus significantly facilitate the biochemical analysis of recombinant proteins and will thus further our understanding of protein-protein interactions on a scale that is difficult to achieve manually.

<table border="1">
 <tbody>
 <tr>
 <td>Name of the reagent</td>
 <td>Company</td>
 <td>Catalogue number</td>
 <td>Comments (optional)</td>
 </tr>
 <tr>
 <td>Overnight Express Instant TB Medium</td>
 <td>Merck Chemicals Ltd </td>
 <td>71491-4 </td>
 <td></td>
 </tr>
 <tr>
 <td>FastBreak</td>
 <td>Promega Ltd.</td>
 <td>V8573 </td>
 <td></td>
 </tr>
 <tr>
 <td>Lysonase Bioprocessing Reagent/ 1 ml </td>
 <td>Merck Chemicals Ltd </td>
 <td>71230 </td>
 <td></td>
 </tr>
 <tr>
 <td>Antifoam 204</td>
 <td>Sigma-Aldrich Company Ltd</td>
 <td>A6426</td>
 <td></td>
 </tr>
 <tr>
 <td>MagneHis Ni-Particles</td>
 <td>Promega</td>
 <td>V8565 </td>
 <td></td>
 </tr>
 <tr>
 <td>Imidazole</td>
 <td>Sigma-Aldrich Company Ltd</td>
 <td>56750 </td>
 <td></td>
 </tr>
 <tr>
 <td>Trizma base</td>
 <td>Sigma-Aldrich Company Ltd.</td>
 <td>93362</td>
 <td></td>
 </tr>
 <tr>
 <td>NaCl</td>
 <td>VWR</td>
 <td>27810.295 </td>
 <td></td>
 </tr>
 <tr>
 <td>Bicinchoninic Acid protein determination </td>
 <td>Sigma-Aldrich Company Ltd </td>
 <td>BCA1-1KT </td>
 <td></td>
 </tr>
 <tr>
 <td>Deep Well Plate 2.2 ml Square Wells PP pk10 </td>
 <td>Anachem Ltd </td>
 <td>1810-00 </td>
 <td></td>
 </tr>
 <tr>
 <td>Microplate MicroWell 96 well flat bottom polystyrene not treated 12 sleeves of 5 plates clear 0.4 ml well volume 128 mm x 86 mm Thermo Scientific Nunc </td>
 <td>Fisher Scientific Ltd.</td>
 <td>DIS-984-090M </td>
 <td></td>
 </tr>
 <tr>
 <td>Microplate Blue</td>
 <td>VWR</td>
 <td>NUNC367001 </td>
 <td></td>
 </tr>
 <tr>
 <td>24-Well Blocks RB (24) </td>
 <td>Qiagen</td>
 <td>19583 </td>
 <td></td>
 </tr>
 <tr>
 <td>Guanidine hydrochloride</td>
 <td>VWR</td>
 <td>ALFAA13543.0B </td>
 <td></td>
 </tr>
 <tr>
 <td>Washable needle for TheOnyx</td>
 <td>Aviso GmbH</td>
 <td>8152-317001 </td>
 <td></td>
 </tr>
 <tr>
 <td>Reagent Rack for Magnetic Beads </td>
 <td>Aviso GmbH</td>
 <td>8152-035003 </td>
 <td></td>
 </tr>
 <tr>
 <td>Plate Reader Synergy HT</td>
 <td>BioTek</td>
 <td>4200-000043</td>
 <td></td>
 </tr>
 <tr>
 <td>Robotic Platform TheOnyx 44OH/150/100</td>
 <td>Aviso GmbH</td>
 <td>8145-050046</td>
 <td></td>
 </tr>
 <tr>
 <td>Microplate Shaker Variomag Teleshaker</td>
 <td>Inheco</td>
 <td>3800047 </td>
 <td></td>
 </tr>
 <tr>
 <td>96-well Magnet Type A</td>
 <td>Qiagen</td>
 <td>36915 </td>
 <td></td>
 </tr>
 </tbody>
</table>

high-throughput purification of affinity-tagged recombinant proteins

X-ray crystallography is the method of choice for obtaining a detailed view of the structure of proteins. Such studies need to be complemented by further biochemical analyses to obtain detailed insights into structure/function relationships. Advances in oligonucleotide- and gene synthesis technology make large-scale mutagenesis strategies increasingly feasible, including the substitution of target residues by all 19 other amino acids. Gain- or loss-of-function phenotypes then allow systematic conclusions to be drawn, such as the contribution of particular residues to catalytic activity, protein stability and/or protein-protein interaction specificity.
In order to attribute the different phenotypes to the nature of the mutation - rather than to fluctuating experimental conditions - it is vital to purify and analyse the proteins in a controlled and reproducible manner. High-throughput strategies and the automation of manual protocols on robotic liquid-handling platforms have created opportunities to perform such complex molecular biological procedures with little human intervention and minimal error rates1-5.
Here, we present a general method for the purification of His-tagged recombinant proteins in a high-throughput manner. In a recent study, we applied this method to a detailed structure-function investigation of TFIIB, a component of the basal transcription machinery. TFIIB is indispensable for promoter-directed transcription in vitro and is essential for the recruitment of RNA polymerase into a preinitiation complex6-8. TFIIB contains a flexible linker domain that penetrates the active site cleft of RNA polymerase9-11. This linker domain confers two biochemically quantifiable activities on TFIIB, namely (i) the stimulation of the catalytic activity during the 'abortive' stage of transcript initiation, and (ii) an additional contribution to the specific recruitment of RNA polymerase into the preinitiation complex4,5,12 . We exploited the high-throughput purification method to generate single, double and triple substitution and deletions mutations within the TFIIB linker and to subsequently analyse them in functional assays for their stimulation effect on the catalytic activity of RNA polymerase4. Altogether, we generated, purified and analysed 381 mutants - a task which would have been time-consuming and laborious to perform manually. We produced and assayed the proteins in multiplicates which allowed us to appreciate any experimental variations and gave us a clear idea of the reproducibility of our results.
This method serves as a generic protocol for the purification of His-tagged proteins and has been successfully used to purify other recombinant proteins. It is currently optimised for the purification of 24 proteins but can be adapted to purify up to 96 proteins.

Watch this Scientific Journal Video about High-throughput Purification of Affinity-tagged Recombinant Proteins at JoVE.com

High-throughput Purification of Affinity-tagged Recombinant Proteins

We describe a method for the affinity-tagged purification of recombinant proteins using liquid-handling robotics. This method is generally applicable to the small-scale purification of soluble His-tagged proteins in a high-throughput format.

X-ray crystallography is the method of choice for obtaining a detailed view of the structure of proteins. Such studies need to be complemented by further ...

high-throughput-purification-of-affinity-tagged-recombinant-proteins

Research

JoVE Journal

Biology

14.0K 조회수.  Imperial College London. 우리는 액체 처리 로봇을 사용하여 재조합 단백질의 친 화성 태그 정화하는 방법을 설명합니다. 이 방법은 일반적으로 높은 처리량 형식에 용해 그의 태그 단백질의 작은 규모의 정화에 적용됩니다.