We greatly appreciate the contributions of our expert anthropometry trainers Irwin Shorr and Jorge Chavarro; the many volunteers who have allowed themselves to be pinched and measured in our anthropometry workshops, and the Project Viva mothers and children for their invaluable contributions. We'd like to extend a special thanks to members of the Project Viva research staff, past and present, especially to Nicole Witham and Marleny Ortega, for their contribution to the video accompanying this manuscript. Funding from the National Institutes of Health supported this work (R01 HD 034568, K24 HD069408).

All the procedures are approved by the Harvard Pilgrim Health Care Institutional Review Board.
1. Training Procedures
<ol>
	<li>Have the trainees (research assistants) complete a multi-day, multiple hour training program to learn proper positioning, watch training videos, and receive in-person training from an experienced auxologist.
	<ol>
		<li>Instruct the trainees to practice performing measurements on each other, while an auxologist or resident anthropometry expert evaluates each trainee&#39;s technique and makes appropriate adjustments.</li>
		<li>Organize a workshop with external volunteers, optimally of a variety of ages and body types, ideally a representative sample of the study population. Have the trainees measure each volunteer a minimum of two times per measurement.</li>
	</ol>
	</li>
	<li>After completing the training program, have the trainees spend approximately an additional 40 - 50 h practicing manual anthropometry techniques on one another and volunteers. During this time, observe the trainees, monitoring adherence to protocol and proper technique. Give each trainee the necessary amount of training based on innate skill level and previous experience.</li>
</ol>
2. Preparation of Subjects
<ol>
	<li>Instruct participants to wear light clothing that allows easy access to the extremities and torso while maintaining modesty, optimally a standard outfit provided by the research staff.</li>
</ol>
3. Height
<ol>
	<li>Measure height using a well-constructed stadiometer, which can be wall-mounted or portable. Either way, take measurements while ensuring that the stadiometer is set up against a wall on a hard, flat surface. 
	NOTE: Among children under the age of 2 years, measure recumbent length instead of standing height. Recumbent length measurements require different procedures8, not detailed in this protocol.</li>
	<li>Ask the participant, before stepping on the stadiometer, to remove any items that could impede measurements. For example, shoes, thick socks, hats, and hair accessories (e.g. hats, headbands, hair bands on the crown of head).</li>
	<li>Guide the participant back onto the board until the participant&#39;s buttocks, shoulder blades, or back of head make contact with the board.</li>
	<li>While facing the participant, instruct the participant to stand on the board with feet spread approximately 2 feet apart. Ask the participant to slowly inch his/her legs back together until the legs, mid-thighs, knees, or feet make contact.</li>
	<li>Instruct the participant to stand as straight as possible, without slouching or leaning. Ensure that feet are flat on the bottom of the height board or floor, and arms hang down by the participant&#39;s sides. Confirm that weight is evenly distributed between the left and right sides of the body.</li>
	<li>Visually verify that the mid-axillary line is perpendicular to the floor. Instruct the participant to move his/her feet away from the back of the stadiometer if necessary to achieve this position. 
	NOTE: The mid-axillary line is an imaginary line in the coronal plane midway between the anterior axillary line and the posterior axillary line, extending from the center of the axilla down through the most superior part of the iliac crest (Figure 1).</li>
</ol>
<img alt="Figure 1" src="/files/ftp_upload/54895/54895fig1.jpg" /> 
Figure 1: Location of the Mid-axillary Line. A coronal line halfway between the anterior and posterior axillary lines15. <a href="http://cloudfront.jove.com/files/ftp_upload/54895/54895fig1large.jpg" target="_blank">Please click here to view a larger version of this figure.</a>
<ol start="7">
	<li>Ask the participant to stand up straight. Ensure that one or more of the following body parts makes contact with back of the stadiometer: feet, head, shoulders, or buttocks.</li>
	<li>Place the participant&#39;s head into the Frankfort Plane (Figure 2).
	<ol>
		<li>Determine the Frankfort Plane by doing the following: Looking at the side of the participant&#39;s head, draw an imaginary line from the lowest margin of the eye orbit to the highest margin at the opening of the ear canal. Position the head so that the imaginary line is parallel to the floor and perpendicular to the stadiometer.</li>
	</ol>
	</li>
</ol>
<img alt="Figure 2" src="/files/ftp_upload/54895/54895fig2.jpg" /> 
Figure 2: The Frankfort Plane. A horizontal plane that passes through the inferior margin of the orbit and the tragion (notch above the tragus of the ear) 16. <a href="http://cloudfront.jove.com/files/ftp_upload/54895/54895fig2large.jpg" target="_blank">Please click here to view a larger version of this figure.</a>
<ol start="9">
	<li>Remind the participant to stand straight and tall, and position the headpiece firmly on top of his/her head with sufficient pressure to compress the hair and make contact with the skull. With the headpiece at eye level, take the measurement to the nearest tenth of a centimeter.</li>
</ol>
4. Sitting Height
<ol>
	<li>Place the stadiometer on top of a sturdy stool tall enough to allow the participant&#39;s legs to form a 90&#176; angle with the ground. Alternatively, if the stadiometer is wall-mounted, place a stool of known height in front of the stadiometer.</li>
	<li>Ask the participant to sit on the stadiometer or on top of the stool so that the buttocks are touching the back of the board.</li>
	<li>Have the participant sit as erect as possible, with buttocks, shoulders and/or head touching the back of the board. Ensure that the mid-axillary line (as described in 3.6) is perpendicular to the stool and parallel to the stadiometer.</li>
	<li>Guide the participant&#39;s knees directly in front of his/her body, and place his/her hands on the thighs.</li>
	<li>Place the participant&#39;s head into the Frankfort Plane. Refer to 3.8.</li>
	<li>Position the headpiece firmly on top of the participant&#39;s head with sufficient pressure to compress the hair and make contact with the skull.</li>
	<li>While directly facing the measuring index with the headpiece at eye level, take measurement to the nearest tenth of a centimeter.</li>
</ol>
5. Weight
<ol>
	<li>Instruct the participant to wear either light clothing or the standard clothing provided at the onset of the anthropometric measurements, to empty his/her bladder, and to remove his/her shoes before attempting the weight measurement.</li>
	<li>Ask the participant, to stand on the scale. Record the measurement to the nearest tenth of a kilogram.</li>
</ol>
6. Waist Circumference
<ol>
	<li>Instruct the participant to stand erect, still, and lateral to a chair, ideally in front of a mirror. Sit facing the mirror, with the participant&#39;s right or left hip bone at eye level. Instruct the participant to cross his/her arms in front while holding up his/her shirt.</li>
	<li>Sitting to the side of the participant, locate the anterior part of the hip bone, which is usually the portion of the hip bone that is most easily identified through dense adipose tissue. Palpate upward along the hip bone to locate the iliac crest, the superior ridge of the hip bone. Continue to palpate the iliac crest until reaching the intersection between the uppermost point of the iliac crest and the mid-axillary line (refer to section 3.6 to locate mid-axillary line). Identify site with a self-adhesive sticker.</li>
	<li>Repeat 6.2 on the other side of the participant&#39;s body.</li>
	<li>While the participant stands perpendicular to the mirror, gently place the measuring tape around the waist on top of the two stickers with the zero side (or base) of the tape measure below. Using the mirror as a guide, adjust the tape so that it is on a level, horizontal plane across the front, back, and both sides.</li>
	<li>Tighten the tape, without pulling the skin. As this is a fine balance, start with the tape measure pinching the skin slightly. Then slowly loosen the tape measure to form a smooth line along the skin, so that the skin is no longer constricted. Place the tape measure firmly on skin without cinching the participant&#39;s waist, so that there are neither gaps in the tape measure nor pinched skin.</li>
	<li>At the end of the participant&#39;s natural exhalation, read the tape to the nearest tenth of a centimeter. 
	NOTE: This measurement is most effectively performed in the presence of mirrors or two research assistants. One researcher, alone, cannot observe proper placement of the tape measure on all sides of the body. The mirrors and/or additional staff member compensate for obstructed areas, informing proper tape measure placement.</li>
</ol>
7. Hip Circumference
<ol>
	<li>Instruct the participant to stand erect next to a chair, perpendicular to the mirror. Ask the participant to fold his/her arms in front of the body with feet pressed together.</li>
	<li>Sit to the side of the participant and face the mirror, so that eyes are level with the participant&#39;s hips.</li>
	<li>Place the measuring tape around the hips over lightweight, tight-fighting clothing. Anchor the tape measure at the maximum protuberance of the buttocks. Adjust the tape so that it is on a horizontal plane around the body. Hold the tape measure firmly. Similarly to the waist measurement, tighten the tape measure so that skin is pinched. Release the tape measure slowly until there is a smooth line around the tape measure.</li>
	<li>Holding the tape measure firmly and flatly, read the measurement to the nearest tenth of a cm.</li>
</ol>
8. Mid-Upper Arm Circumference (MUAC)
<ol>
	<li>Instruct the participant to lift his/her shirtsleeve to shoulder height, to ensure that measurement is conducted directly on skin. While the participant is standing, position his/her right arm so that it is flexed at a 90&#176; angle at the elbow with the palm facing up and fingertips pointing straight ahead.</li>
	<li>Stand behind the participant. Locate the posterior lateral shoulder bone that connects the participant&#39;s shoulder blade and clavicle bone (Figure 3). This bony structure, known as the acromion process, will serve as initial point zero on the tape measure.</li>
</ol>
<img alt="Figure 3" src="/files/ftp_upload/54895/54895fig3.jpg" /> 
Figure 3: Anatomy of the Shoulder. Shoulder anatomy includes the acromion process, identified in red17. <a href="http://cloudfront.jove.com/files/ftp_upload/54895/54895fig3large.jpg" target="_blank">Please click here to view a larger version of this figure.</a>
<ol start="3">
	<li>Extend the tape down the midline of the back of the arm, past the bony tip of the elbow, known as the olecranon. Using a tape measure the distance between the acromion process and the olecranon to the nearest tenth of a centimeter and place a self-adhesive sticker halfway between the olecranon and the acromion process over the posterior center of the humorous.</li>
	<li>Hold the participant&#39;s arm slightly away from body, to ensure that muscles are relaxed.</li>
	<li>Standing to the right and slightly behind the participant, wrap the MUAC Tape (small, flip tape) around the upper arm so that it covers the self-adhesive sticker. Ensure that the tape measure is perpendicular to the arm length.</li>
	<li>Pull the tape so that there are no gaps in tape or areas of skin constriction. As with the hip and arm circumferences, this is a fine balance. Use greater tension and slowly release the tape until there are no further areas of pinched skin.</li>
	<li>Read the measurement and record to the nearest tenth of a centimeter.</li>
</ol>
9. Triceps Skin Fold Thickness
<ol>
	<li>Use the sticker placement at the posterior midpoint of the participant&#39;s arm (as determined by steps 8.1 - 8.3). Instruct the participant to stand upright, with shoulders relaxed and arms hanging loosely.</li>
	<li>Standing behind the participant, identify a location approximately 2 cm above the sticker at the upper arm midpoint. Grasp a sizable fold of skin between the thumb and index finger about 1 - 2 cm into the skin. Roll the skin between fingers. 
	NOTE: If the skinfold rolls easily between the fingers, it likely contains only skin and subcutaneous fat. If the skinfold does not roll easily or the grasp is particularly painful for the participant, it may contain muscle.</li>
	<li>Shake the skin and/or roll fingers slowly to adjust the fold so that it contains only skin and subcutaneous fat, not muscle. Measure all subcutaneous fat above the muscle.</li>
	<li>Hold the skinfold parallel to the arm. Place the skinfold caliper jaw perpendicular to the length of the fold and on either side of the marked midpoint.</li>
	<li>While holding the skinfold, completely release grip on the caliper lever. The caliper dial will continue to decrease as the skin is compressed by the caliper jaws. Hold the skin between the caliper jaws for 4 full s, after which time the skin should be fully compressed. After 4 s, record the measurement to the nearest two tenths of a centimeter. 
	NOTE: If it is the correct amount of skin and subcutaneous tissue, the measurement (as read on the caliper dial) will decrease less rapidly or will not decrease at all after 4 s. If the measurement value on the caliper dial continues to decrease rapidly, the skinfold did not contain enough subcutaneous fat. Should this be the case, wait two minutes for the compressed skin to return to normal. Retry the measurement by grasping a thicker fold.</li>
</ol>
10. Subscapular Skinfold Thickness
<ol>
	<li>Instruct the participant to stand upright, with shoulders relaxed and arms hanging loosely.</li>
	<li>Standing behind the participant, palpate the lowermost tip of the scapula. Locate the measurement site, two centimeters below the lower tip of the scapula, and place the calipers there.</li>
	<li>Grasp a sizable fold of skin between the thumb and index finger on a diagonal approximately 2 cm above and to the left of the measurement site. The skin should roll easily between fingers if it contains only skin and subcutaneous fat. Adjust the skinfold, so that the measurement contains only skin and subcutaneous fat.</li>
	<li>Place the caliper jaws perpendicular to the measurement site, so that the measurement is taken parallel to the medial, inferior bone of the scapula. While holding the skinfold, completely release grip on the caliper lever. Record measurement to the nearest two tenths of a cm after 4 s.</li>
	<li>Ensure that the caliper dial remains consistent or decreases only minimally after 4 s. A rapidly decreasing measure on the caliper dial indicates that not enough subcutaneous fat has been obtained. If this is the case, wait 2 min for the compressed skin to return to normal. Retry the measurement by grasping a thicker fold.</li>
</ol>
11. Quality Control (QC) Procedures
<ol>
	<li>Require all staff members, including experienced and new research staff members, to measure volunteers during the QC sessions. Obtain an equal number of volunteers and staff members to maximize efficiency. If the study staff consists of 1-3 people, request at least four volunteers to ensure that reliability is properly assessed.</li>
	<li>Designate one individual to be the gold standard rater for the QC session, either a quality rater from the research staff or an outside expert. Ensure that he/she has a proven record of reliability (both intra-rater reliability and reliability when compared to either a skilled auxologist or a gold standard, such as DXA).</li>
	<li>Have all study staff members conduct each manual anthropometric measure two or more times on each volunteer.</li>
	<li>Calculate intra-rater and inter-rater reliability after the QC session, using technical error of measurement (TEM). 
	NOTE: TEM is used to assess the difference between two measurements that is attributable to measurement error12. TEM is the square root of measurement error variance: TEM= <img alt="Equation 1" src="/files/ftp_upload/54895/54895eq1.jpg" />, where d2 is either the difference between repeated measurements by each research assistant (intra-rater reliability) or the difference between the sum of the anthropometry expert&#39;s replicates minus the sum of a research assistant&#39;s replicates (inter-rater reliability)12.</li>
	<li>Identify staff members whose inter- or intra-rater TEM values fall outside of the predetermined TEM range of acceptability14. Provide more training for staff members whose anthropometric measures fall outside of the acceptable range, prior to allowing field data collection from study participants.</li>
</ol>

<ol>
	<li>Boeke, C. E., Oken, E., Kleinman, K. P., Rifas-Shiman, S. L., Taveras, E. M., Gillman, M. W. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Correlations+among+adiposity+measures+in+school-aged+children.">Correlations among adiposity measures in school-aged children.</a> BMC Pediatrics. 13 (99), (2013).</li><li>Ogden, C. L., Carroll, M. D., Kit, B. K., Flegal, K. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Prevalence+of+childhood+and+adult+obesity+in+the+United+States,+2011-2012.">Prevalence of childhood and adult obesity in the United States, 2011-2012.</a> JAMA. 311 (8), 806-814 (2014).</li><li>Erermis, S., Cetin, N., Tamar, M., Bukusoglu, N., Akdeniz, F., Goksen, D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Is+obesity+a+risk+factor+for+psychopathology+among+adolescents.">Is obesity a risk factor for psychopathology among adolescents.</a> Pediatr Int. 46 (3), 296-301 (2004).</li><li>Gunnell, D., Frankel, S., Nachahal, K., Peters, T., Smith, G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Childhood+obesity+and+adult+cardiovascular+mortality:+A+57-y+follow-up+study+based+on+the+boyd+orr+cohort.">Childhood obesity and adult cardiovascular mortality: A 57-y follow-up study based on the boyd orr cohort.</a> AJCN. 67 (6), 1111-1118 (1998).</li><li>Vanhala, M., Vanhala, P., Kumpusalo, E., Halonen, P., Takala, J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Relation+between+obesity+from+childhood+to+adulthood+and+the+metabolic+syndrome:+Population+based+study.">Relation between obesity from childhood to adulthood and the metabolic syndrome: Population based study.</a> Brit Med J. 317 (7154), 319 (1998).</li><li>Papoutsakis, C., Priftis, K. N., Drakouli, M., Prifti, S., Konstantaki, E., Chondronikola, M., Antonogeorgos, G., Matziou, V. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Childhood+overweight/obesity+and+asthma:+is+there+a+link?+A+systematic+review+of+recent+epidemiologic+evidence.">Childhood overweight/obesity and asthma: is there a link? A systematic review of recent epidemiologic evidence.</a> J Acad Nutr Diet. 113 (1), 77-105 (2013).</li><li>Rifas-Shiman, S. L., Rich-Edwards, J. W., Scanlon, K. S., Kleinman, K. P., Gillman, M. W. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Misdiagnosis+of+overweight+and+underweight+children+younger+than+2+years+of+age+due+to+length+measurement+bias.">Misdiagnosis of overweight and underweight children younger than 2 years of age due to length measurement bias.</a> MedGenMed. 7 (4), 56 (2005).</li><li>Horan, M., Gibney, E., Molloy, E., McAuliffe, F. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Methodologies+to+assess+paediatric+adiposity.">Methodologies to assess paediatric adiposity.</a> Ir J Med Sci. 814 (1), 1-16 (2014).</li><li>Wells, J. C., Fewtrell, M. S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Measuring+body+composition.">Measuring body composition.</a> Arch Dis Child. 91 (7), 612-617 (2006).</li><li>Wells, J. C., Fuller, N. J., Dewit, O., Fewtrell, M. S., Elia, M., Cole, T. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Four-component+model+of+body+composition+in+children:+Density+and+hydration+of+fat-free+mass+and+comparison+with+simpler+models.">Four-component model of body composition in children: Density and hydration of fat-free mass and comparison with simpler models.</a> Am J Clin Nutr. 69 (5), 904-912 (1999).</li><li>Damilakis, J., Adams, J. E., Guglielmi, G., Link, T. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Radiation+exposure+in+X-ray-based+imaging+techniques+used+in+osteoporosis.">Radiation exposure in X-ray-based imaging techniques used in osteoporosis.</a> Eur J Radiol. 20 (11), 2707-2714 (2010).</li><li>Ulijaszek, S. J., Kerr, D. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Anthropometric+measurement+error+and+the+assessment+of+nutritional+status.">Anthropometric measurement error and the assessment of nutritional status.</a> Brit J Nutr. 82 (3), 165-177 (1999).</li><li>Oken, E., Baccarelli, A. A., Gold, D. R., Kleinman, K. P., Litonjua, A. A., DeMeo, D., Gillman, M. W. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Cohort+profile:+Project+Viva.">Cohort profile: Project Viva.</a> Int J Epidemiol. 44 (1), 37-48 (2015).</li><li>Ulijaszek, S. J., Lourie, J. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Intra-+and+inter-observer+error+in+anthropometric+measurement.">Intra- and inter-observer error in anthropometric measurement.</a> Anthropometry: the Individual and the Population. , 30-55 (1994).</li><li>H&#228;ggstr&#246;m, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Medical+gallery+of+Mikael+H&#228;ggstr&#246;m+2014.">Medical gallery of Mikael H&#228;ggstr&#246;m 2014.</a> Wikiversity Journal of. Medicine. 1 (2), (2014).</li><li>. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Acromion+of+Scapula05.">Acromion of Scapula05.</a> DBCLS. , (2013).</li></ol>

The authors have nothing to disclose.

Accurate body composition measures are critical for properly assessing childhood growth in research studies. Researchers widely accept DXA as a gold standard method, and many criticize manual anthropometric measures as being imprecise and inaccurate. However, this analysis of anthropometric techniques to estimate body fat suggests that well-trained research assistants who follow a standardized protocol can conduct manual anthropometric measures with excellent accuracy, yielding adiposity estimates that are highly correla...

Overweight and obesity remain at epidemic levels, with approximately one-third of US children and two-thirds of adults having overweight or obesity, according to 2011 - 2012 estimates2. Overweight, obesity, and excess body fat confer greater risk of adverse cardiometabolic outcomes, including Type 2 diabetes and cardiovascular diseases, as well as other adverse physical and psychological health outcomes, including asthma and depression3,4,5,6.
Most studies that examine associations between obesity and later-life health outcomes assume accurate measurements of weight and length/height. Categories of weight status in adults and children include underweight (body mass index (BMI) &#60; 18.0 kg/m2 for adults and &#60; 5th age-sex-specific percentile for children), normal weight (BMI 18.0 to &#60; 25.0 kg/m2 for adults and 5th to &#60; 85th percentile for children), overweight (BMI 25.0 to &#60; 30.0 kg/m2 for adults and 85th to &#60; 95th percentile for children), and obesity (BMI &#8805; 30 kg/m2 for adults and &#8805; 95th percentile for children). Even minor measurement errors can influence these categorizations, especially in children for whom errors that appear small on an absolute scale can represent a large error relative to the child&#39;s size7. For example, in a prior study of children under 2 years of age, comparisons of length measured by the conventional clinical paper-and-pencil method with the recumbent length-board method indicated that paper-and-pencil method systematically overestimated length by an average of 1.3 (1.5) cm &#8212; an error that results in substantial misclassification7.
Using BMI to estimate adiposity offers many advantages for research, including the low equipment cost and minimal burden of height and weight measurement, as well as the opportunity to leverage self-report and clinical measures. However, even with accurate measurement of height and weight, variation in BMI does not necessarily reflect variation in adiposity, since BMI incorporates both lean and fat mass1. Thus, methods that directly measure adiposity are also important for understanding relationships with health outcomes.
Gold standard methods of adiposity and body composition measurement generally rely on technological methods, including air displacement plethysmography (ADP), hydrostatic weighing, magnetic resonance imaging (MRI), and computed tomography (CT), as well as dual X-ray absorptiometry (DXA)8,9,10. While these methods provide some of the most accurate measures of body composition, many of them are not practical in pediatric research studies, especially those that are field-based. For example, hydrostatic weighing requires that individuals be completely submerged in water. ADP equipment has, until quite recently, been available only to measure infants up to 8 kg or children and adults over the age of 6 years, but not toddlers or preschool-age children. CT scans emit a large amount of radiation compared with the other techniques, and the long acquisition time for MRI makes it impractical for many studies8. DXA emits about 1/500 the radiation dose of a CT scan, approximately the equivalent of one day of natural background radiation11, making it an attractive option for research studies involving children. All of these methods, however, are expensive to purchase and none are portable, making them infeasible for field-based studies with limited funding. Bioelectrical impedance analysis (BIA), which measures the impedance of a minute electrical signal sent through the body to estimate body composition, can be less expensive and more portable, but assumptions underlying the calculation of body fat are not applicable to small children10.
In contrast to these technology-based measures, manual anthropometric measures can be performed by a trained observer in most field settings and at a substantially lower equipment cost. Manual anthropometry includes measurements of height, weight, circumferences, and skinfold thicknesses8. Other advantages of manual anthropometry are that it involves no unnecessary radiation exposure, and skilled staff can obtain them efficiently. However, a common concern about manual anthropometric measurements is that they may be both inaccurate and imprecise12.
Obtaining accurate and precise measurements is possible with standardized procedures, adequate training, and sufficient attention to quality control (QC) procedures. The Project Viva team has developed a manual anthropometry training protocol that can yield high-quality, reproducible measures of stature, circumferences, and skinfold thickness. Over more than a decade, we have applied this training and QC protocol to mothers and children in Project Viva, a longitudinal, pre-birth cohort study13. Project Viva staff collected anthropometric measures on child during visits at birth (0 - 3 days), and with both the mother and child at the following time points: infancy (4.9 - 10.6 months), early childhood (2.8 - 6.3 years), mid-childhood (6.6 - 10.9 years), and early teen (11.5 - 16.5 years) 13.
This paper describes the protocol we developed and refined for measurement of height, weight, skinfold thicknesses (triceps and subscapular skinfolds), and body circumferences (waist, hip, and mid-upper arm circumferences [MUAC]) in Project Viva. We also describe how we have assessed both manual anthropometric measurement precision by means of technical error of measurement (TEM) calculations and accuracy in comparison to gold standard DXA measurements.

<table border="0" cellpadding="0" cellspacing="0" width="596">
	<tbody>
		<tr height="210">
			<td height="210" style="height:210px;width:216px;">Stadiometer</td>
			<td style="width:95px;">Weigh and Measure, LLC&#160;</td>
			<td style="width:119px;">SSWM-1</td>
			<td style="width:167px;">Basic Shorr board (without smooth slide features) can also be used. In order to accommodate the width of children&#39;s hips during sitting height, the base of a stadiometer should be approximately 60 cm wide or larger.</td>
		</tr>
		<tr height="105">
			<td height="105" style="height:105px;width:216px;">Bioimpedance scale&#160;</td>
			<td style="width:95px;">Tanita Coporation of America</td>
			<td style="width:119px;">TBF 300A (model is discontinued), DC-430U is&#160; comparable&#160;&#160;&#160;</td>
			<td style="width:167px;">Scale is used for weight and bioimpedance. Any digital, standardized scale can be used for weight only.</td>
		</tr>
		<tr height="105">
			<td height="105" style="height:105px;width:216px;">Skinfold Caliper</td>
			<td style="width:95px;">Holtain Limited</td>
			<td style="width:119px;">n/a</td>
			<td style="width:167px;">This model uses a dial gauge in graduations of 0.2 mm. Models with a linear gauge are also acceptable.&#160;&#160;</td>
		</tr>
		<tr height="189">
			<td height="189" style="height:189px;width:216px;">Hip/waist tape measure</td>
			<td style="width:95px;">Gulick II Plus Measuring Tape</td>
			<td style="width:119px;">67019</td>
			<td style="width:167px;">This model uses compression bands, which makes it easier to identify how firmly the tape measure is being pulled. The compression band is not necessary, but highly recommended.</td>
		</tr>
		<tr height="105">
			<td height="105" style="height:105px;width:216px;">MUAC measuring tape (ShorrTape&#169; Measuring Tape)&#160;</td>
			<td style="width:95px;">Weigh and Measure, LLC</td>
			<td style="width:119px;">STape</td>
			<td style="width:167px;">The tape measure should be flexible with a single or double slotted insertion window.</td>
		</tr>
	</tbody>
</table>

assessment of child anthropometry in a large epidemiologic study

A high proportion of children have overweight and obesity in the United States and other countries. Accurate assessment of anthropometry is essential to understand health effects of child growth and adiposity. Gold standard methods of measuring adiposity, such as dual X-ray absorptiometry (DXA), may not be feasible in large field studies. Research staff can, however, complete anthropometric measurements, such as body circumferences and skinfold measurements, using inexpensive portable equipment. In this protocol we detail how to obtain manual anthropometric measurements from children, including standing and sitting height, weight, waist circumference, hip circumference, mid-upper arm circumference, triceps skinfold thickness, and subscapular skinfold thickness, and procedures to assess the quality of these measurements. To demonstrate accuracy of these measurements, among 1,110 school-aged children in the pre-birth cohort Project Viva we calculated Spearman correlation coefficients comparing manual anthropometric measurements with a gold standard measure of body fat, DXA fat mass1. To address reliability, we evaluate intra-rater technical error of measurement at a quality control session conducted on adult female volunteers.

This analysis addresses precision of the manual anthropometric measurements using data generated from quality control (QC) procedures, and evaluates intra-rater measurement error by Technical Error of Measurement (TEM) 12. TEM ranges of acceptability are based on calculations of repeated intra-rater anthropometric measures, where 95% of measurement discrepancy is due to factors other than rater imprecision12,<sup class=...

Watch this Scientific Journal Video about Assessment of Child Anthropometry in a Large Epidemiologic Study at JoVE.com

Assessment of Child Anthropometry in a Large Epidemiologic Study

In epidemiologic studies of children, well-trained research staff can accurately and precisely assess weight, height, sitting height, skinfold thicknesses, and body circumferences.

A high proportion of children have overweight and obesity in the United States and other countries. Accurate assessment of anthropometry is essential to ...

assessment-of-child-anthropometry-in-a-large-epidemiologic-study

Research

Education

JoVE Core

JoVE Journal

Statistics

Medicine

Unit 1

Biostatistics

SCIENTISTS IN ACTION

26.9K 조회수.  Harvard Medical School and Harvard Pilgrim Health Care Institute. In epidemiologic studies of children, well-trained research staff can accurately and precisely assess weight, height, sitting height, skinfold thicknesses, and body circumferences. 

비디오: Assessment of Child Anthropometry in a Large Epidemiologic Study

Biomarkers in an Animal Model for Revealing Neural, Hematologic, and Behavioral Correlates of PTSD

Identification of biomarkers representing the evolution of the pathophysiology of Post Traumatic Stress Disorder (PTSD) is vitally important, not only for objective diagnosis but also for the evaluation of therapeutic efficacy and resilience to trauma. Ongoing research is directed at identifying molecular biomarkers for PTSD, including traumatic stress induced proteins, transcriptomes, genomic variances and genetic modulators, using biologic samples from subjects' blood, saliva, urine, and postmortem brain tissues. However, the correlation of these biomarker molecules in peripheral or postmortem samples to altered brain functions associated with psychiatric symptoms in PTSD remains unresolved. Here, we present an animal model of PTSD in which both peripheral blood and central brain biomarkers, as well as behavioral phenotype, can be collected and measured, thus providing the needed correlation of the central biomarkers of PTSD, which are mechanistic and pathognomonic but cannot be collected from people, with the peripheral biomarkers and behavioral phenotypes, which can.
Our animal model of PTSD employs restraint and tail shocks repeated for three continuous days - the inescapable tail-shock model (ITS) in rats. This ITS model mimics the pathophysiology of PTSD 17, 7, 4, 10. We and others have verified that the ITS model induces behavioral and neurobiological alterations similar to those found in PTSD subjects 17, 7, 10, 9. Specifically, these stressed rats exhibit (1) a delayed and exaggerated startle response appearing several days after stressor cessation, which given the compressed time scale of the rat's life compared to a humans, corresponds to the one to three months delay of symptoms in PTSD patients (DSM-IV-TR PTSD Criterian D/E 13), (2) enhanced plasma corticosterone (CORT) for several days, indicating compromise of the hypothalamopituitary axis (HPA), and (3) retarded body weight gain after stressor cessation, indicating dysfunction of metabolic regulation.
The experimental paradigms employed for this model are: (1) a learned helplessness paradigm in the rat assayed by measurement of acoustic startle response (ASR) and a charting of body mass; (2) microdissection of the rat brain into regions and nuclei; (3) enzyme-linked immunosorbent assay (ELISA) for blood levels of CORT; (4) a gene expression microarray plus related bioinformatics tools 18. This microarray, dubbed rMNChip, focuses on mitochondrial and mitochondria-related nuclear genes in the rat so as to specifically address the neuronal bioenergetics hypothesized to be involved in PTSD.

We describe a rat model of post traumatic stress disorder (PTSD) that reveals the persistent alterations in neuroendocrine function and the delayed long-term, exaggerated fear response, characteristic of PTSD patients. The animal model and methods described here are useful for correlating biomarkers in brain nuclei, which are mechanistic but cannot be measured in patients, with biomarkers in peripheral white blood cells, which can.

PTSD의, 신경 Hematologic, 그리고 행동 상관 관계를 누설하는 행위에 대해서는 동물 모델에서 생체

Identification of biomarkers representing the evolution of the pathophysiology of Post Traumatic Stress Disorder (PTSD) is vitally important, not only for ...

연구

의학

Real-time fMRI Biofeedback Targeting the Orbitofrontal Cortex for Contamination Anxiety

We present a method for training subjects to control activity in a region of their orbitofrontal cortex associated with contamination anxiety using biofeedback of real-time functional magnetic resonance imaging (rt-fMRI) data. Increased activity of this region is seen in relationship with contamination anxiety both in control subjects1 and in individuals with obsessive-compulsive disorder (OCD),2 a relatively common and often debilitating psychiatric disorder involving contamination anxiety. Although many brain regions have been implicated in OCD, abnormality in the orbitofrontal cortex (OFC) is one of the most consistent findings.3, 4 Furthermore, hyperactivity in the OFC has been found to correlate with OCD symptom severity5 and decreases in hyperactivity in this region have been reported to correlate with decreased symptom severity.6 Therefore, the ability to control this brain area may translate into clinical improvements in obsessive-compulsive symptoms including contamination anxiety. Biofeedback of rt-fMRI data is a new technique in which the temporal pattern of activity in a specific region (or associated with a specific distributed pattern of brain activity) in a subject's brain is provided as a feedback signal to the subject. Recent reports indicate that people are able to develop control over the activity of specific brain areas when provided with rt-fMRI biofeedback.7-12 In particular, several studies using this technique to target brain areas involved in emotion processing have reported success in training subjects to control these regions.13-18 In several cases, rt-fMRI biofeedback training has been reported to induce cognitive, emotional, or clinical changes in subjects.8, 9, 13, 19 Here we illustrate this technique as applied to the treatment of contamination anxiety in healthy subjects. This biofeedback intervention will be a valuable basic research tool: it allows researchers to perturb brain function, measure the resulting changes in brain dynamics and relate those to changes in contamination anxiety or other behavioral measures. In addition, the establishment of this method serves as a first step towards the investigation of fMRI-based biofeedback as a therapeutic intervention for OCD. Given that approximately a quarter of patients with OCD receive little benefit from the currently available forms of treatment,20-22 and that those who do benefit rarely recover completely, new approaches for treating this population are urgently needed.

Here we present a method for training people to control a brain area involved in contamination anxiety and for probing the relationship between contamination anxiety and brain connectivity patterns.

오염 불안에 대한 Orbitofrontal 접속을 타겟팅 실시간 fMRI의 생체 자기 제어 중이죠

We present a method for training subjects to control activity in a region of their orbitofrontal cortex associated with contamination anxiety using ...

A Novel Application of Musculoskeletal Ultrasound Imaging

Ultrasound is an attractive modality for imaging muscle and tendon motion during dynamic tasks and can provide a complementary methodological approach for biomechanical studies in a clinical or laboratory setting. Towards this goal, methods for quantification of muscle kinematics from ultrasound imagery are being developed based on image processing. The temporal resolution of these methods is typically not sufficient for highly dynamic tasks, such as drop-landing. We propose a new approach that utilizes a Doppler method for quantifying muscle kinematics. We have developed a novel vector tissue Doppler imaging (vTDI) technique that can be used to measure musculoskeletal contraction velocity, strain and strain rate with sub-millisecond temporal resolution during dynamic activities using ultrasound. The goal of this preliminary study was to investigate the repeatability and potential applicability of the vTDI technique in measuring musculoskeletal velocities during a drop-landing task, in healthy subjects. The vTDI measurements can be performed concurrently with other biomechanical techniques, such as 3D motion capture for joint kinematics and kinetics, electromyography for timing of muscle activation and force plates for ground reaction force. Integration of these complementary techniques could lead to a better understanding of dynamic muscle function and dysfunction underlying the pathogenesis and pathophysiology of musculoskeletal disorders.

We describe a new ultrasound-based vector tissue Doppler imaging technique to measure muscle contraction velocity, strain and strain rate with sub-millisecond temporal resolution during dynamic activities. This approach provides complementary measurements of dynamic muscle function and could lead to a better understanding of mechanisms underlying musculoskeletal disorders.

근골격계 초음파 이미징의 소설 응용 프로그램

Ultrasound is an attractive modality for imaging muscle and tendon  motion during dynamic tasks and can provide a complementary methodological  approach ...

An Isolated Working Heart System for Large Animal Models

Since its introduction in the late 19th century, the Langendorff isolated heart perfusion apparatus, and the subsequent development of the working heart model, have been invaluable tools for studying cardiovascular function and disease1-15. Although the Langendorff heart preparation can be used for any mammalian heart, most studies involving this apparatus use small animal models (e.g., mouse, rat, and rabbit) due to the increased complexity of systems for larger mammals1,3,11. One major difficulty is ensuring a constant coronary perfusion pressure over a range of different heart sizes &#8211; a key component of any experiment utilizing this device1,11. By replacing the classic hydrostatic afterload column with a centrifugal pump, the Langendorff working heart apparatus described below allows for easy adjustment and tight regulation of perfusion pressures, meaning the same set-up can be used for various species or heart sizes. Furthermore, this configuration can also seamlessly switch between constant pressure or constant flow during reperfusion, depending on the user&#8217;s preferences. The open nature of this setup, despite making temperature regulation more difficult than other designs, allows for easy collection of effluent and ventricular pressure-volume data.

Most studies involving the Langendorff apparatus use small animal models due to the increased complexity of systems for larger mammals. We describe a Langendorff system for large animal models that allows for use across a range of species, including humans, and relatively easy data acquisition.

큰 동물 모델에 대한 격리 된 작업 심장 시스템

Since its introduction in the late 19th century, the Langendorff isolated heart perfusion apparatus, and the subsequent development of the working heart ...

Clinical Assessment of Spatiotemporal Gait Parameters in Patients and Older Adults

Spatial and temporal characteristics of human walking are frequently evaluated to identify possible gait impairments, mainly in orthopedic and neurological patients1-4, but also in healthy older adults5,6. The quantitative gait analysis described in this protocol is performed with a recently-introduced photoelectric system (see&#160;Materials table) which has the potential to be used in the clinic because it is portable, easy to set up (no subject preparation is required before a test), and does not require maintenance and sensor calibration. The photoelectric system consists of series of high-density floor-based photoelectric cells with light-emitting and light-receiving diodes that are placed parallel to each other to create a corridor, and are oriented perpendicular to the line of progression7. The system simply detects interruptions in light signal, for instance due to the presence of feet within the recording area. Temporal gait parameters and 1D spatial coordinates of consecutive steps are subsequently calculated to provide common gait parameters such as step length, single limb support and walking velocity8, whose validity against a criterion instrument has recently been demonstrated7,9. The measurement procedures are very straightforward; a single patient can be tested in less than 5 min&#160;and a comprehensive report can be generated in less than 1&#160;min.

This protocol is used to evaluate spatial and temporal gait variables of neurological/orthopedic patients and older persons by means of a recently-introduced floor-based photocell system.

환자와 노인의 시공간 보행 매개 변수의 임상 평가

Spatial and temporal characteristics of human walking are frequently evaluated to identify possible gait impairments, mainly in orthopedic and ...

Surgical Angiogenesis in Porcine Tibial Allotransplantation: A New Large Animal Bone Vascularized Composite Allotransplantation Model

Segmental bone loss resulting from trauma, infection malignancy and congenital anomaly remains a major reconstructive challenge. Current therapeutic options have significant risk of failure and substantial morbidity.
Use of bone vascularized composite allotransplantation (VCA) would offer both a close match of resected bone size and shape and the healing and remodeling potential of living bone. At present, life-long drug immunosuppression (IS) is required. Organ toxicity, opportunistic infection and neoplasm risks are of concern to treat such non-lethal indications.
We have previously demonstrated that bone and joint VCA viability may be maintained in rats and rabbits without the need of long-term-immunosuppression by implantation of recipient derived vessels within the VCA. It generates an autogenous, neoangiogenic circulation with measurable flow and active bone remodeling, requiring only 2 weeks of IS. As small animals differ from man substantially in anatomy, bone physiology and immunology, we have developed a porcine bone VCA model to evaluate this technique before clinical application is undertaken. Miniature swine are currently widely used for allotransplantation research, given their immunologic, anatomic, physiologic and size similarities to man. Here, we describe a new porcine orthotopic tibial bone VCA model to test the role of autogenous surgical angiogenesis to maintain VCA viability.
The model reconstructs segmental tibial bone defects using size- and shape-matched allogeneic tibial bone segments, transplanted across a major swine leukocyte antigen (SLA) mismatch in Yucatan miniature swine. Nutrient vessel repair and implantation of recipient derived autogenous vessels into the medullary canal of allogeneic tibial bone segments is performed in combination with simultaneous short-term IS. This permits a neoangiogenic autogenous circulation to develop from the implanted tissue, maintaining flow through the allogeneic nutrient vessels for a short time. Once established, the new autogenous circulation maintains bone viability following cessation of drug therapy and subsequent nutrient vessel thrombosis.

Currently any kind of vascularized composite allotransplantation depends on long-term-immunosuppression, difficult to support for non-life-critical indications. We present a new porcine tibial VCA model that can be used to study bone VCA and demonstrate the use of surgical angiogenesis to maintain bone viability without the need of long-term immune-modulation.

돼지 Tibial Allotransplantation 외과 신생: 새로운 큰 동물 뼈 나가도록 복합 Allotransplantation 모델

Segmental bone loss resulting from trauma, infection malignancy and congenital anomaly remains a major reconstructive challenge. Current therapeutic ...

Assessment of Plasma Coagulation on Liver Tissue in a Large Animal Model In Vivo

Plasma coagulation as a form of electrocautery is used in liver surgery for decades to seal the large liver cut surface after major hepatectomy to prevent hemorrhages at a later stage. The exact effects of plasma coagulation on liver tissue are only poorly examined. In our porcine model, the coagulation effects can be examined close to the clinical application. A combined laser Doppler flowmeter and spectrophotometer documents microcirculation changes during coagulation at 8 mm tissue depth noninvasively, providing quantifiable information about hemostasis beyond the subjective clinical impression. The temperature at coagulation site is assessed with an infrared thermometer prior and post coagulation and with a thermographic camera during coagulation, a measurement of the gas beam temperature is not possible due to the upper threshold of the devices. The depth of coagulation is measured microscopically on hematoxylin/eosin stained sections after calibration with an object micrometer and gives an exact information about the power setting-coagulation depth-relation. The sealing effect is examined on the bile ducts as it is not possible for a plasma coagulator to seal larger blood vessels. Burst pressure experiments are carried out on explanted organs to rule out blood pressure related effects.

Assessment of Plasma Coagulation on Liver Tissue in a Large Animal Model In Vivo

Here we present a protocol to experimentally assess plasma coagulation in liver tissue in vivo. In a porcine model, microcirculation is examined by laser Doppler, coagulation depth is measured histologically, temperature at coagulation site by infrared thermometer and thermographic camera, and duct sealing effect is documented by burst pressure experiments.

플라즈마 응고는 큰 동물 모델에서 에서 Vivo에서 간 조직에의 평가

Plasma coagulation as a form of electrocautery is used in liver surgery for decades to seal the large liver cut surface after major hepatectomy to prevent ...

Objective Nociceptive Assessment in Ventilated ICU Patients: A Feasibility Study Using Pupillometry and the Nociceptive Flexion Reflex

The concept of objective nociceptive assessment and optimal pain management have gained increasing attention. Despite the known negative short- and long-term consequences of unresolved pain or excessive analgosedation, adequate nociceptive monitoring remains challenging in non-communicative, critically ill adults. In the intensive care unit (ICU), routine nociceptive evaluation is carried out by the attending nurse using the Behavior Pain Scale (BPS) in mechanically ventilated patients. This assessment is limited by medication use (e.g., neuromuscular blocking agents) and the inherent subjective character of nociceptive evaluation by third parties.
Here, we describe the use of two nociceptive reflex testing devices as tools for objective pain evaluation: the pupillary dilation reflex (PDR) and nociception flexion reflex (NFR). These measurement tools are non-invasive and well tolerated, providing clinicians and researchers with objective information regarding two different nociceptive processing pathways: (1)&#160;the pain-related autonomic reactivity&#160;and (2) the ascending component of the somatosensory system. The use of PDR and NFR measurements are currently limited to specialized pain clinics and research institutions because of impressions that these are technically demanding or time-consuming procedures, or even because of a lack of knowledge regarding their existence.
By focusing on the two abovementioned nociceptive reflex assessments, this study evaluated their feasibility as a physiological pain measurement method in daily practice. Pursuing novel technologies for evaluating the analgesia level in unconscious patients may further improve individual pharmacological treatment and patient related outcome measures. Therefore, future research must include large well-designed clinical trials in a real-life environment.

Pain assessment in anesthetized patients who cannot communicate with the outside world in any way remains challenging despite the development of innovative objective pain evaluation tools. In this project, the pupillary dilation reflex and the nociception flexion reflex are assessed in critically ill, mechanically ventilated adult patients.

The concept of objective nociceptive assessment and optimal pain management have gained increasing attention. Despite the known negative short- and ...

In Vitro Model of Coronary Angiogenesis

Here, we describe an in vitro culture assay to study coronary angiogenesis. Coronary vessels feed the heart muscle and are of clinical importance. Defects in these vessels represent severe health risks such as in atherosclerosis, which can lead to myocardial infarctions and heart failures in patients. Consequently, coronary artery disease is one of the leading causes of death worldwide. Despite its clinical importance, relatively little progress has been made on how to regenerate damaged coronary arteries. Nevertheless, recent progress has been made in understanding the cellular origin and differentiation pathways of coronary vessel development. The advent of tools and technologies that allow researchers to fluorescently label progenitor cells, follow their fate, and visualize progenies in vivo have been instrumental in understanding coronary vessel development. In vivo studies are valuable, but have limitations in terms of speed, accessibility, and flexibility in experimental design. Alternatively, accurate in vitro models of coronary angiogenesis can circumvent these limitations and allow researchers to interrogate important biological questions with speed and flexibility. The lack of appropriate in vitro model systems may have hindered the progress in understanding the cellular and molecular mechanisms of coronary vessel growth. Here, we describe an in vitro culture system to grow coronary vessels from the sinus venosus (SV) and endocardium (Endo), the two progenitor tissues from which many of the coronary vessels arise. We also confirmed that the cultures accurately recapitulate some of the known in vivo mechanisms. For instance, we show that the angiogenic sprouts in culture from SV downregulate COUP-TFII expression similar to what is observed in vivo. In addition, we show that VEGF-A, a well-known angiogenic factor in vivo, robustly stimulates angiogenesis from both the SV and Endo cultures. Collectively, we have devised an accurate in vitro culture model to study coronary angiogenesis.

In vitro models of coronary angiogenesis can be utilized for the discovery of the cellular and molecular mechanisms of coronary angiogenesis. In vitro explant cultures of sinus venosus and endocardium tissues show robust growth in response to VEGF-A and display a similar pattern of COUP-TFII expression as in vivo.

관상 동맥 혈관 신생의 체외 모델

Here, we describe an in vitro culture assay to study coronary angiogenesis. Coronary vessels feed the heart muscle and are of clinical importance. Defects ...

Using a Chemical Biopsy for Graft Quality Assessment

Kidney transplantation is a life-saving treatment for a large number of people with end-stage renal dysfunction worldwide. The procedure is associated with an increased survival rate and greater quality of patient&#8217;s life when compared to conventional dialysis. Regrettably, transplantology suffers from a lack of reliable methods for organ quality assessment. Standard diagnostic techniques are limited to macroscopic appearance inspection or invasive tissue biopsy, which do not provide comprehensive information about the graft. The proposed protocol aims to introduce solid phase microextraction (SPME) as an ideal analytical method for comprehensive metabolomics and lipidomic analysis of all low molecular compounds present in kidneys allocated for transplantation. The small size of the SPME probe enables performance of a chemical biopsy, which enables extraction of metabolites directly from the organ without any tissue collection. The minimum invasiveness of the method permits execution of multiple analyses over time: directly after organ harvesting, during its preservation, and immediately after revascularization at the recipient&#8217;s body. It is hypothesized that the combination of this novel sampling method with a high-resolution mass spectrometer will allow for discrimination of a set of characteristic compounds that could serve as biological markers of graft quality and indicators of possible development of organ dysfunction.

The protocol presents utilization of the chemical biopsy approach followed by comprehensive metabolomic and lipidomic analysis for quality assessment of kidney grafts allocated for transplantation.

이식 품질 평가를 위해 화학 생검 사용

Kidney transplantation is a life-saving treatment for a large number of people with end-stage renal dysfunction worldwide. The procedure is associated ...