University of Maryland

The inner ear sensory epithelium of adult zebrafish is a good model system for understanding the mechanisms of hair cell regeneration in adult vertebrates. This protocol demonstrates the fine dissection of the epithelia, through which we can get tissue samples for studying the regenerative events at cellular and subcellular levels.

Non-invasive measurements of neural activity patterns in freely behaving animals are obtained by combining neurophysiological recordings with high speed videography.

This article illustrates the floral-dip method of Agrobacterium tumefaciens -mediated transformation of Arabidopsis thaliana. By introducing a cell-cycle regulated promoter-reporter, pTSO2::β-glucuronidase (GUS), into Arabidopsis, we illustrates how one detects GUS reporter expression in transgenic seedlings.

This article illustrates how to properly use the BioRad Helios Gene Gun to introduce plasmid DNA into onion epidermal cells and how to test for protein-protein interactions in onion cells based on the principle of Bimolecular Fluorescence Complementation (BiFC)

Laser ablation electrospray ionization (LAESI) is an atmospheric-pressure ion source for mass spectrometry. In the imaging mode, a mid-infrared laser probes the distributions of molecules across a tissue section or a biofilm. This technique presents a new approach for diverse bioanalytical studies carried out under native experimental conditions.

Lyme disease research studies often require generation of ticks infected with the pathogen Borrelia burgdorferi, a process that typically takes several weeks. Here we demonstrate a microinjection-based tick infection procedure that can be accomplished within hours. We also demonstrate an immunofluorescence method for in situ localization of B. burgdorferi within ticks.

A technique is described to quantify the in vivo physiological response of mammalian neurons during movement and correlate the physiology of the neuron with neuronal morphology, neurochemical phenotype and synaptic microcircuitry.

An in vivo animal model of injury is described. The method takes advantage of the subcutaneous position of the fibular nerve. Velocity, timing of muscle activation, and arc of motion are all pre-determined and synchronized using commercial software. Post injury changes are monitored in vivo using MR imaging/spectroscopy.

This article describes a biofabrication approach: deposition of stimuli-responsive polysaccharides in the presence of biased electrodes to create biocompatible films which can be functionalized with cells or proteins. We demonstrate a bench-top strategy for the generation of the films as well as their basic uses for creating interactive biofunctionalized surfaces for lab-on-a-chip applications.

Here we describe a method for activating and expanding human NKT cells from bulk T cell populations using artificial antigen presenting cells (aAPC). The use of CD1d-based aAPC provides a standardized method for generating high numbers of functional NKT cells.

ELISPOT Assay: Detection of IFN-γ Secreting Splenocytes

Immunohistochemistry and Immunocytochemistry: Tissue Imaging via Light Microscopy

Confocal Fluorescence Microscopy: A Technique to Determine the Localization of Proteins in Mouse Fibroblasts

Immunoprecipitation-Based Techniques: Purification of Endogenous Proteins Using Agarose Beads

Many therapeutic applications require safe and efficient transport of drug carriers and their cargoes across cellular barriers in the body. This article describes an adaptation of established methods to evaluate the rate and mechanism of transport of drug nanocarriers (NCs) across cellular barriers, such as the gastrointestinal (GI) epithelium.

A method for permanently bonding two silicon wafers so as to realize a uniform enclosure is described. This includes wafer preparation, cleaning, RT bonding, and annealing processes. The resulting bonded wafers (cells) have uniformity of enclosure ~1%^1,2. The resulting geometry allows for measurements of confined liquids and gasses.

Utero-tubal embryo transfer uses the utero-tubal junction as a barrier to prevent the embryo outflow that may occur when performing uterine transfer. Vasectomized males are required to obtain pseudopregnant recipients for embryo transfer. Both techniques are discussed.

C. elegans is usually grown on solid agar plates or in liquid cultures seeded with E. coli. To prevent bacterial byproducts from confounding toxicological and nutritional studies, we utilized an axenic liquid medium, CeHR, to grow and synchronize a large number of worms for a range of downstream applications.

We present a microfluidic-based electrochemical biochip for DNA hybridization detection. Following ssDNA probe functionalization, the specificity, sensitivity, and detection limit are studied with complementary and non-complementary ssDNA targets. Results illustrate the influence of the DNA hybridization events on the electrochemical system, with a detection limit of 3.8 nM.

This protocol describes the synthesis of biofunctionalized Prussian blue nanoparticles and their use as multimodal, molecular imaging agents. The nanoparticles have a core-shell design where gadolinium or manganese ions within the nanoparticle core generate MRI contrast. The biofunctional shell contains fluorophores for fluorescence imaging and targeting ligands for molecular targeting.

C-tactile (CT) afferents respond to caress-like touch, which has been found to activate “social brain” regions ¹. Using fMRI, we compared neural responses of experiencing and imagining CT-targeted vs. non-CT-targeted touch to explore how the affective component of social touch is imbued.

Bacterial mechanosensitive channels can be used as mechanoelectrical transducers in biomolecular devices. Droplet interface bilayers (DIBs), cell-inspired building blocks to such devices, represent new platforms to incorporate and stimulate mechanosensitive channels. Here, we demonstrate a new micropipette-based method of forming DIBs, allowing the study of mechanosensitive channels under mechanical stimulation.

Here we present a protocol to build a rapid Brillouin spectrometer. Cascading virtually imaged phase array (VIPA) etalons achieve a measurement speed more than 1,000 times faster than traditional scanning Fabry-Perot spectrometers. This improvement provides the means for Brillouin analysis of tissue and biomaterials at low power levels in vivo.

We present methods for the construction of electrodes to simultaneously record extracellular neural activity and release multiple neuroactive substances at the vicinity of the recording sites in awake mice. This technique allows the detailed analysis of putative local synaptic inputs to the neuron of interest.

We describe the use of micro-thermocouples to estimate local temperature gradients in steady laminar boundary layer diffusion flames. By extension of the Reynolds Analogy, local temperature gradients can be further used to estimate the local mass burning rates and heat fluxes in such flames with high accuracy.

Gene-targeting mutagenesis is now possible in a wide range of organisms using genome editing techniques. Here, we demonstrate a protocol for targeted gene mutagenesis using transcription activator like effector nucleases (TALENs) in Astyanax mexicanus, a species of fish that includes surface fish and cavefish.

Engineering and analysis of load bearing tissues with heterogeneous cell populations are still a challenge. Here, we describe a method for creating bi-layered alginate hydrogel discs as a platform for co-culture of diverse cell populations within one construct.

We provide a method to simultaneously screen a library of antibody fragments for binding affinity and cytoplasmic solubility by using the Escherichia coli twin-arginine translocation pathway, which has an inherent quality control mechanism for intracellular protein folding, to display the antibody fragments on the inner membrane.

Here, we present protocols for rearing an intermediate-germ beetle, Dermestes maculatus (D. maculatus) in the lab. We also share protocols for embryonic and parental RNAi and methods for analyzing embryonic phenotypes to study gene function in this species.

Here, we present a procedure for the measurement of simultaneous impedance, rheology and neutron scattering from soft matter materials under shear flow.

We describe the process of fabrication and testing of photonic thermometers.

This protocol describes in detail the generation of footprint-free induced pluripotent stem cells (iPSCs) from human pancreatic cells in feeder-free conditions, followed by editing using CRISPR/Cas9 ribonucleoproteins and characterization of the modified single-cell clones.

Here we describe a method for establishing a model of Zika virus-induced microcephaly in mouse. This protocol includes methods for embryonic, neonatal, and adult-stage intracerebral inoculation of the Zika virus.

This study presents a novel method to provide efficient patient temperature control for cooling or warming patients. A single use, triple lumen device is placed into the esophagus, analogous to a standard orogastric tube, and connects to existing heat exchange units to perform automatic patient temperature management.

We describe steps that enable fast in situ sampling of a small portion of an individual cell with high precision and minimal invasion using capillary-based micro-sampling, to facilitate chemical characterization of a snapshot of metabolic activity in live embryos using a custom-built single cell capillary electrophoresis and mass spectrometry platform.

This article features a method to test the monosynaptic connections between neurons by employing tetrodotoxin and the tetrodotoxin-resistant sodium channel, NaChBac.

Here, we describe a protocol for chromatin immunoprecipitation of modified histones from the budding yeast Saccharomyces cerevisiae. Immunoprecipitated DNA is subsequently used for quantitative PCR to interrogate the abundance and localization of histone post-translational modifications throughout the genome.

We present an efficient method of studying lens accommodation by using a manual lens stretcher. The protocol mimics physiological accommodation by pulling the zonules connected around the lens capsule, thereby, stretching the lens.

All pathogenic Leishmania species reside and replicate inside macrophages of their vertebrate hosts. Here, we present a protocol to infect murine bone marrow-derived macrophages in culture with Leishmania, followed by precise quantification of intracellular growth kinetics. This method is useful for studying individual factors influencing host-pathogen interaction and Leishmania virulence.

This paper describes a protocol that uses a remote video monitoring surveillance system to continuously monitor breeding colonies of ground-nesting waterbirds. The system includes five cameras monitoring individual nests and one camera monitoring the colony as a whole, and is powered by car batteries that are recharged via solar panels.

The primary goal of the study is to develop a protocol to prepare consistent specimens for accurate mechanical testing of high strength copolymer aramid fibers, by removing a coating and disentangling the individual fiber strands without introducing significant chemical or physical degradation.

Landscape processes are critical components of soil formation and play important roles in determining soil properties and spatial structure in landscapes. We propose a new approach using stepwise principal component regression to predict soil redistribution and soil organic carbon across various spatial scales.

Here, we present a method for generating tissue-specific binary transcription systems in Drosophila by replacing the first coding exon of genes with transcription drivers. The CRISPR/Cas9-based method places a transactivator sequence under the endogenous regulation of a replaced gene, and consequently facilitates transctivator expression exclusively in gene-specific spatiotemporal patterns.

Measurement of rodent skeletal muscle contractile function is a useful tool that can be used to track disease progression as well as efficacy of therapeutic intervention. We describe here the non-invasive, in vivo assessment of the dorsiflexor muscles that can be repeated over time in the same mouse.

We present a fluorogenic peptide cleavage assay that allows a rapid screening of the proteolytic activity of proteases on peptides representing the cleavage site of viral fusion peptides. This method can also be used on any other amino acid motif within a protein sequence to test for the protease activity.

A simple ATP-measuring assay and live/dead staining method were used to quantify and visualize Neisseria gonorrhoeae survival after treatment with ceftriaxone. This protocol can be extended to examine the antimicrobial effects of any antibiotic and can be used to define the minimal inhibitory concentration of antibiotics in bacterial biofilms.

The goal of the study was to develop protocols to prepare consistent specimens for accurate mechanical testing of high-strength aramid or ultra-high-molar-mass polyethylene-based flexible unidirectional composite laminate materials and to describe protocols for performing artificial ageing on these materials.

This protocol describes an in vivo phagocytosis assay in adult Drosophila melanogaster to quantify phagocyte recognition and clearance of microbial infections.

The intracellular Na⁺ concentration ([Na⁺]_i) in cardiac myocytes is altered during cardiac diseases. [Na⁺]_i is an important regulator of intracellular Ca²⁺. We introduce a novel approach to measure [Na⁺]_i in freshly isolated murine atrial myocytes using an electron multiplying charged coupled device (EMCCD) camera and a rapid, controllable illuminator.

A protocol that uses enhanced QM/MM method to investigate the isotopic effect on the double proton transfer process in porphycene is presented here.

This protocol describes methods used to examine neural mechanisms underlying sleep-dependent memory consolidation during naps in early childhood. It includes procedures for examining the effect of sleep on behavioral memory performance, as well as the application and recording of both polysomnography and actigraphy.

Described here are three experimental approaches for studying the dynamics of HIV infection in humanized mice. The first permits the study of chronic infection events, whereas the two latter allows for the study of acute events after primary infection or viral reactivation.

Here, we present a compiled protocol to evaluate the cutaneous infection of mice with Leishmania amazonensis. This is a reliable method for studying parasite virulence, allowing a systemic view of the vertebrate host response to the infection.

This protocol describes a technique for visualizing macrophage behavior and death in embryonic zebrafish during Mycobacterium marinum infection. Steps for the preparation of bacteria, infection of the embryos, and intravital microscopy are included. This technique may be applied to the observation of cellular behavior and death in similar scenarios involving infection or sterile inflammation.

In vivo fast photochemical oxidation of proteins (IV-FPOP) is a hydroxyl radical protein footprinting technique that allows for mapping of protein structure in their native environment. This protocol describes the assembly and set-up of the IV-FPOP microfluidic flow system.

Here, we characterize protein structure and interaction sites in living cells using a protein footprinting technique termed in-cell fast photochemical oxidation of proteins (IC-FPOP).

Here, we detail how to synchronize Drosophila to a circadian day. This is the first, and most important step necessary for studying biological rhythms and chronobiology.

CRISPR/Cas9 is increasingly used to characterize gene function in non-model organisms. This protocol describes how to generate knock-out lines of Culex pipiens, from preparing injection mixes, to obtaining and injecting mosquito embryos, as well as how to rear, cross, and screen injected mosquitoes and their progeny for desired mutations.

This article outlines the basic laboratory conditions and protocols for an incremental temperature regime to stimulate maximal spawning in the Mexican tetra Astyanax mexicanus, which is an emerging model for developmental and evolutionary studies.

The goal of this protocol is to directly bioprint breast epithelial cells as multicellular spheroids onto pre-formed endothelial networks to rapidly create 3D breast-endothelial co-culture models which can be used for drug screening studies.

This protocol aims to fabricate 3D cardiac spheroids (CSs) by co-culturing cells in hanging drops. Collagen-embedded CSs are treated with doxorubicin (DOX, a cardiotoxic agent) at physiological concentrations to model heart failure. In vitro testing using DOX-treated CSs may be used to identify novel therapies for heart failure patients.

A new static platform is used to characterize protein structure and interaction sites in the native cell environment utilizing a protein footprinting technique called in-cell fast photochemical oxidation of proteins (IC-FPOP).

The primary goal of this study is to describe a protocol to prepare polymeric fiber mats with consistent morphology via solution blow spinning (SBS). We aim to use SBS to develop novel, tunable, flexible polymeric fiber nanocomposites for various applications, including protective materials, by incorporating nanoparticles in a polymer-elastomer matrix.

We present a protocol for constructing a simple spore-distribution system consisting of an inoculation box with a ~50 µm mesh and a transparent plastic chamber. This can be used to evenly inoculate plants with powdery mildew spores, thereby enabling accurate and reproducible assessment of disease phenotypes of plants under study.

Here, we present a protocol to synthesize two types of UTe₂ crystals: those exhibiting robust superconductivity, via chemical vapor transport synthesis, and those lacking superconductivity, via molten metal flux synthesis.

Here we describe a mass spectrometry-based proteomic characterization of cell lineages with known tissue fates in the vertebrate Xenopus laevis embryo.

This protocol describes a method for obtaining quantitative data on the antifungal activity of peptides and other compounds, such as small-molecule antifungal agents, against Candida albicans. Its use of optical density rather than counting colony-forming units to quantify growth inhibition saves time and resources.

The present protocol describes the isolation and culture of bone marrow-derived macrophages from mice.

Current methods for analyzing the intracellular dynamics of polarized single cells are often manual and lack standardization. This manuscript introduces a novel image analysis pipeline for automating midline extraction of single polarized cells and quantifying spatiotemporal behavior from time lapses in a user-friendly online interface.

This work aims to facilitate the development of standardized techniques for impregnating or grafting aminated compounds onto silica substrates, which are often broadly described in the literature. Specific amounts of solvent, substrate, amines, and the values of other important experimental parameters will be discussed in detail.

A general protocol for the combined enzymatic and semi-automated mechanical dissociation of tissues to generate single-cell suspensions for downstream analyses, such as flow cytometry, is provided. Instructions for the fabrication, assembly, and operation of the low-cost mechanical device developed for this protocol are included.

This protocol was developed to longitudinally monitor the mechanical properties of neural plate tissue during chick embryo neurulation. It is based on the integration of a Brillouin microscope and an on-stage incubation system, enabling live mechanical imaging of neural plate tissue in ex ovo cultured chick embryos.

Here, we present a protocol to intravitally image the transplanted mouse left lung using two-photon microscopy. This represents a valuable tool for studying cellular dynamics and interactions in real-time following murine lung transplantation.

This protocol describes the assembly of a pneumatic system for the delivery of pressurized air to a needle during the process of needle beveling. The protocol further describes the beveling process for creating sharp microinjection needles and how to gauge the relative opening size of the needle.

This protocol presents a scalable method for converting food waste into biodegradable polyhydroxyalkanoate (PHA) bioplastics. It utilizes arrested anaerobic digestion for food waste pretreatment, halophilic microbial fermentation for PHA biosynthesis, and a chemical-free downstream process for PHA recovery.